Dells XPS are made of magic. [long story, major fuckup, 10k+ damages]

It all started in December. One morning I was late to work, drove there as fast as possible. (I live like 3 minutes away so me being late really meant *late*) Parked my car in a secluded car park, grabbed my backpack and ran to work. The car park is like 100 meters away from work so I took my feet into my hands and ran. Next thing I know my heels loose all grip while I go down a small slope and I drop on my back full force. On a sharp edged stone. With only my 1700$ XPS in it. Fuck.

I paniced, but got up and ran to work. I checked on the notebook, praying it would boot. It booted! Holy shit. I flipped the notebook and saw two small dents in the aluminum shell. I was thorougly impressed. I later discovered that it left a small shadow on the display, but given what a hit that was (I am not exactly a lightweight), impressive would be a massive understatement.

Fast forward to February, I am weighing my options to get the screen replaced maybe, as damage on my hardware (even if neglectable) triggers some sort of OCD and makes me feel bad 24/7. Also my laptop tends to shut off from time to time, looked into the Event Viewer and saw kernel panic. I figured that the battery probably still took a hit and that it drops voltage from time to time and the kernel assumes a critical situation, thus shutting off.

It stayed quite snowy in Austria up until March, so occasional snowing wasn't rare. Got out of work one day, saw it snowed a bit. Whatever. I had my moms car at the time, so I tried if it would slide a bit if I donut on the now (5pm) empty parking space. Nothing. Drove done a small hill, ABS triangle lit up red (board computer can't outbalance the snow). I drove out to the main street where everything was salted and drove along towards my house. Took a turn into my street, accelerated for a bit and then went off the gas so the car would smoothly drive along with the speed slowly degrading. So I went off the gas and noticed I was a bit to the right, no wonder, centrifugal forces.

*steers left*
"Huh seems like I need a bit more"
*car still doesnt move much*
"What the- go to the left!"
*steers left hard*
"Fuck that wall is coming closer"
*Breaks*
*car doesnt break*
"FUCK FUCK FUCK FUCK!!!"

Everything got quiet in seconds, me waking up to an open airbag, ripped pants, a hurting wrist, the radio somewhere on the ground and fumes that smellt like burning wires. I grabbed my backpack that was now somewhere on the floor instead of on the seat and ran outside, tears in my eyes and the phone on my ear calling my mom. I walked inside as she walked outside, hearing a weeping scream that I haven't heard from her since I am alive. While walking inside I noticed my backpack was wet on the bottom, my 2 litre water jug shattered when my backpack hit the dashboard. I tried to stay calm and act rational, knowing that every second counts when It comes to water damage. I hastely searched for some rice and a bag to put my laptop into, stuffed the bag with both and went outside. The car was totaled, my mom pissed and crying. And I was in shock, sad, angry and hurting.

I kept the laptop on my heater for a few days, bagged in rice. I dared to try a boot after a while and you wont believe me, it fucking booted. Even the keyboard backlight worked, just the screen was obviously broken in the back (no color distortion or bad pixel rows though!!) and the aluminum shell had a dent on the front. I talked with Dell Support a few days later, asking if it would be ok to open the XPS up so I could drain all of the water. She said yes thats fine, as long as I dont touch anything or screw around with it.

She said I can send it in and get it checked, but the pickup and analysis will cost 150$ and I can go from there.

I sent it in and estimated that, because battery, screen and other things probably needed changing, it will be around 900$.

Got a call a few weeks later:

"Hello beggarboy, the repair team reported back to us and said that they will have to replace everything, which will be 1700$."

"Fuck... Buying a new one is cheaper.."

"Yeah I know I am sorry about that, I can offer you a voucher so you can buy a new one for 250$ off if you would prefer that"

"Sorry but I will need some time to consider"

"I understand."

The agent clearly noticed I was bummed about it.

After going back and forth what to do I got another call a few days later.

"Hello beggarboy, we talked a few days ago. I have good news"

"Hello, yes, speak up?"

"I was able to get a special offer for you after putting in a few words..."

The next thing she said seemed unreal to me.

She was able to cut 600$ (!!!), making the new offer 1100$, instead of 1700$ or a new one for 1500$. I figured the reason she probably did that was because I am always very polite with support members. Always.

My XPS is back and healty again.
Thank you for taking the time to read this.
Dells XPS are made of magic.

I have this little hobby project going on for a while now, and I thought it's worth sharing. Now at first blush this might seem like just another screenshot with neofetch.. but this thing has quite the story to tell. This laptop is no less than 17 years old.

So, a Compaq nx7010, a business laptop from 2004. It has had plenty of software and hardware mods alike. Let's start with the software.

It's running run-off-the-mill Debian 9, with a custom kernel. The reason why it's running that version of Debian is because of bugs in the network driver (ipw2200) in Debian 10, causing it to disconnect after a day or so. Less of an issue in Debian 9, and seemingly fixed by upgrading the kernel to a custom one. And the kernel is actually one of the things where you can save heaps of space when you do it yourself. The kernel package itself is 8.4MB for this one. The headers are 7.4MB. The stock kernels on the other hand (4.19 at downstream revisions 9, 10 and 13) took up a whole GB of space combined. That is how much I've been able to remove, even from headless systems. The stock kernels are incredibly bloated for what they are.

Other than that, most of the data storage is done through NFS over WiFi, which is actually faster than what is inside this laptop (a CF card which I will get to later).

Now let's talk hardware. And at age 17, you can imagine that it has seen quite a bit of maintenance there. The easiest mod is probably the flash mod. These old laptops use IDE for storage rather than SATA. Now the nice thing about IDE is that it actually lives on to this very day, in CF cards. The pinout is exactly the same. So you can use passive IDE-CF adapters and plug in a CF card. Easy!

The next thing I want to talk about is the battery. And um.. why that one is a bad idea to mod. Finding replacements for such old hardware.. good luck with that. So your other option is something called recelling, where you disassemble the battery and, well, replace the cells. The problem is that those battery packs are built like tanks and the disassembly will likely result in a broken battery housing (which you'll still need). Also the controllers inside those battery packs are either too smart or too stupid to play nicely with new cells. On that laptop at least, the new cells still had a perceived capacity of the old ones, while obviously the voltage on the cells themselves didn't change at all. The laptop thought the batteries were done for, despite still being chock full of juice. Then I tried to recalibrate them in the BIOS and fried the battery controller. Do not try to recell the battery, unless you have a spare already. The controllers and battery housings are complete and utter dogshit.

Next up is the display backlight. Originally this laptop used to use a CCFL backlight, which is a tiny tube that is driven at around 2000 volts. To its controller go either 7, 6, 4 or 3 wires, which are all related and I will get to. Signs of it dying are redshift, and eventually it going out until you close the lid and open it up again. The reason for it is that the voltage required to keep that CCFL "excited" rises over time, beyond what the controller can do.

So, 7-pin configuration is 2x VCC (12V), 2x enable (on or off), 1x adjust (analog brightness), and 2x ground. 6-pin gets rid of 1 enable line. Those are the configurations you'll find in CCFL. Then came LED lighting which required much less power to run. So the 4-pin configuration gets rid of a VCC and a ground line. And finally you have the 3-pin configuration which gets rid of the adjust line, and you can just short it to the enable line.

There are some other mods but I'm running out of characters. Why am I telling you all this? The reason is that this laptop doesn't feel any different to use than the ThinkPad x220 and IdeaPad Y700 I have on my desk (with 6c12t, 32G of RAM, ~1TB of SSDs and 2TB HDDs). A hefty setup compared to a very dated one, yet they feel the same. It can do web browsing, I can chat on Telegram with it, and I can do programming on it. So, if you're looking for a hobby project, maybe some kind of restrictions on your hardware to spark that creativity that makes code better, I can highly recommend it. I think I'm almost done with this project, and it was heaps of fun :D

*Opens devRant*
*sees everybody saying how great Linux is*
*Tries deepin OS*
*Keyboard backlight not working *
*Searches YouTube for a fix*
*Fixes the Backlight*
*Screen resolution set to 800*600 by defualt (monitor 1920*1080)*
*Grub decides there is no need for a windows entry*
*plugs in Windows USB*
*Opens cmd*
*diskpart*
*list disk*
*sel disk 0*
*list vol*
*sel vol 3*
*clean*
*boots into windows*
*Follows a guide to remove grub*
*Learns the lesson*
*Ooh OS X seems nice*
FML

Idiot mode: on

It's bad when you realize you are the most idotic person you know. I just bought a wifi card replacement for my laptop only to find out that one of the screws on its back was completely unscrewable. I foolishly decided to force my way through by forcing the plastic. I tought I got away with it as I only damaged a plastic support tighten to the laptop base but now, my laptop screen isn't showing anything.

When I first booted it up after this, it was working, but it started showing troubling signs shortly after. Now, all I can get out of it is a completely black screen, no backlight at all.

What should I do? 😥