1024 points of soldering !!

Wasn't expecting that when I began, but it's quite interesting and the result will look amazing ^^
I'm making a LED matrix from 0, controlled by an Arduino, it will look really good when it's finished, I plan to use it to display notifications, clock, sound spectrum etc...
What do you think of it ? 😇

Guess what my supervisor had lying around the house and gave me? (from an old company project) My desk is gonna shine bright like a diamond. Yes, it's RGB.

Now we're talking!

Pimped out the setup...

I have it fading through all of the colors

Task: blinking light.

Boomers: One lightbulb, one bimetallic strip.

Zoomers: LED (D13), Atmega328P, Atmega328, 5V, 16MHz, 2KB SRAM, 32KB flash, 1KB EEPROM, FT232RL, 19.0mm x 43.18mm, 16 analog pins, 14 digital I/O pins, 6 PWM pins, 2 resettable fuses, 8MHz external crystal, 16MHz external crystal, 12MHz crystal, 0.5mm pitch, 0.1 inch headers, 1.27mm pitch headers, mini-USB, 3.3V regulator, 5V regulator, 16MHz ceramic resonator, 1N5819 Schottky diode, 47uF capacitor, 100uF capacitor, 10uF capacitor, 100nF capacitor, 0.1uF capacitor, 22pF capacitor, 1N4007 diode, 10K resistor, 4.7K resistor, 330 ohm resistor, 10uH inductor, 27 ohm resistor, 2x3 ICSP header, reset button, LED (D13), green LED, red LED, yellow LED, 6-pin header, 8-pin header, 28-pin DIP socket, 6-pin FTDI header, ceramic resonator, USB mini-B socket, 16MHz oscillator, M7 diode, LDO voltage regulator, 3.3V regulator, 5V voltage regulator, polyfuse, 22pF capacitors, 100nF capacitors, 10uF capacitors, 47uF capacitors, 100uF capacitors, 1N4007 diode, 1N5819 Schottky diode, 16MHz resonator, 0.1uF capacitor, 330 ohm resistors, 27 ohm resistors, 4.7K resistor, 10K resistor, 10uH inductor, 22pF capacitor, mini-USB connector, 8-pin header, 6-pin header, 2x3 ICSP header, reset button, ceramic resonator.