Around 27 hours at new customer location.

They had a server failure due to incompetence.

They had fired their own IT guy and called us 6 months later because the server stopped responding.

First diagnostic. 2 drives are dead in a raid 5 with one hot spare. Raid controller then proved to be broken once the disks was replaced.

Waiting for new raid controller and installing.

Backup non existing, no one changed dat tape during the 6 months without IT. The tape was just a transparent plastic band, no media left.

Raid config is stored in static ram on controller, no backup!

Several hours in tech support to find out how to rebuild raid config from existing disks.

Proves to be impossible to rebuild raid set due to some checksum failures.

More hours with support to enable some diagnostic read only mode to mirror low level content to external drive.

Then many more hours to copy parts of the tree until it gets an error, restart after that and go on.

In the end we got around 70% back.

During this time I manage to be in contact with the raid manufacturers all support centers, one in europe, one in the us and one in Taiwan, switching each time one if them closed for the night.

The customer later declined a steady support contract due to us being to expensive ;)

Some just don’t want to learn.

BEEP-BEEP
Every now and then, periodically
BEEP-BEEP
and then quiet. Get into working mode, concentrate again, a...
BEEP-BEEP

wtf is that.. Took down my smoke alarm, prolly the battery is getting low. Put it next to me, waiting...
BEEP-BEEP
nope, it's gotta be smth else. How can I hunt it down when I can't even tell which direction it's coming from?!? I know. Play smart. Measure the period.
BEEP-BEEP
it's been 3 minutes 5 seconds since the last BEEP-fucking-BEEP. Now I can plan my time ahead. Go to one room, wait fo..
BEEP-BEEP
Nope, it's not there. Carry on with all the other rooms, waiting for that annoying beeping.
BEEP-BEEP
I think I at least know the room. Good, narowed it down.
BEEP-BEEP

this is getting really annoying. I've been playing with this nonsense for an hour already. Alright, it's in my kid's room. The PC is off, toys are off. What could it be....? Binary search the f
BEEP-BEEP
uck out of it! aight, I first try to identify from which part of the room it's coming from. Stand in the middle and tu
BEEP-BEEP
ahh, right, it's behind me then. Fine. That's the PC corner. But it's off, it can't be making sounds. Esp when it has no speakers plugged in - it's got only Bluetooth speakers which haven't been turned on for what, a year already? but then w
BEEP-BEEP
hat could it be... Sounds like it's indeed coming from the PC corner. Checking all the LEDs -- all are off, nothing's turned on. Move the speakers away, try digging around to see if the kiddo didn't leave his toys behind the
BEEP-BEEP
PC. Wait, the sound has moved behind me... And I've only moved my BT speakers. Which are turned off. That's odd... could it be? Put one to one ear and another one to another and wait for the remaining 15 seconds
BEEP-(you are a fucking idiot)-BEEP
whispers in my left ear.

Turns out, some BT speakers can make low-battery sounds even when they are turned off.

Today my raspberry pi media center bricked itself (at least it won't boot properly. Than I thought I just format the SD card and reinstall everything. But than my windows pc won't boot properly because it's still running on old hdd and I suck at building PCs. Than I tried my ThinkPad with antergos and remembered that it is also dead because the last update broke something. And now I'm trying to boot my windows at least into safe mode and my ThinkPad to boot from the live stick to chroot and fix it. Still waiting since 15min for any progress.
Now is my old Oneplus One with an outdated nightly of a custom Rom my only working connection to the web.
I'm starting to think that waiting for the last minute to fix problems might not the best way for me.

The way we've been waiting for Slack's dark mode, it better be lit! 🔥

i don't think that i'm having a burnout but i think that i'm maybe not so far away from it... several people, including friends, my therapist and also a colleague, told me they see me at risk of sliding into a real burnout.

i've known this for longer that i have a crappy work life balance. the habit of making work the most important part of my own life. thinking about work even in my private time, when i fall asleep, when i wake up in the night or in the morning. the tendency to think about problems, plans, coworkers, not being able to quit work mentally. the idea that i have to prove to everybody at work that i'm awesome. the feeling that, after a work day, i'm just "waiting" at home for the next day, in idle mode, so i can continue working on a problem (like a bug) that's occupying my whole mind. and at the same time, feeling totally empty after work, having no energy. i've lost interest and quit several hobbies in the last two years that once were important for me. and i think one important reason is that i didn't have any mental energy left to deal with that.

another factor for this development was also the pandemic for sure, because for some time, i had no real social life except for that at work.
but more important is probably that i find my job most of the time really fun and am highly motivated. i have the tendency to say yes to everything and to really commit to and own the problems that are handed to me. (right now, however i feel like there's not much motivation left)
then again there is the feeling that what i do is never good enough, i have little self confidence in my own abilities as a software engineer. there's a big discrepancy between how i myself perceive my work and how other people do (not only at work). on a rational level, i know that what i do is at least "good enough", otherwise i wouldn't have this job, and i wouldn't receive this amount of positive feedback from people. but it's hard to really deeply understand this thing, when there are deep-rooted beliefs like "only perfect is good enough" or "your colleagues will be disappointed and get a negative idea of you (and something bad will happen), if you don't give your best"... and there's also this idea that i have to be this super nerdy person who also codes in their free time, reads IT magazines and stuff, because only then i will fit this stereotype of a software developer, and only then i can be taken seriously and be good enough. no matter if this is fun for me or not.

anyway, right now i'm at a point in life where i'm realizing all this not only rationally, but with full emotional impact... :/ my life feels like it's gone stale and empty. i've lost creativity, warmth and human connection and that hurts a lot.

i'm trying to change my life.
one thing that really helps me right now is to talk with people who have (made) similar experiences. can you relate? if yes, how do / did you address those problems? i would really appreciate to hear your stories...

Stress made me fall into old habits of instead of saying stop and letting my team now that I was falling apart (not realising it myself even) I just kept saying "Yes, I fix that." to every single request that was made in the project.

The closer we got to the deadline, the more I hyperfocused and ignored the signs. I just kept working. The last two days I didn't even sleep.

Of course the launch botched. I finally broke down and both my mind and my body have given up, since yesterday I'm in a mental feedback loop causing continuous anxiety attacks and migraines. I literally CAN'T do anything but trying to not go back into fight- or flight mode and remember to breathe.

I FINALLY made my project manager aware (something I should have done days ago) that I am incapacitated and now I am waiting for medication (Oxazepam) to be picked up at the pharmacy by my husband.

I almost literally worked myself into the ground.

I've been here before. Never again.

This is what happens if you don't listen to your mind and body and put up a white flag in time.

I am currently looking for a DAW (Digital Audio Workstation), because my music projects are starting to get a little too complex for Audacity.

So I started looking for a good, easy-to-learn, ideally free program, and quickly learned that Avid now has a free version of Pro Tools called First.

So I go to their site and fill out the registration form to get the download. In addition to creating an account with Avid, you also need to create one with iLok, which apparently has something to do with how they manage their licenses. Kinda overkill for a free program, but okay...

I download the program (about 3gigs...), install it and try to start it. It gives me an error message about missing some service. Okay? I'm confused because I notice that an 'Application Manager' service has appeared in my tray, and when I open that I can log into my new account just fine. But it still doesn't work.

There's a link in the error message to the iLok website, and it looks like ai need to dowload and install another component. Why didn't that get installed with the program if it's required?

Hmm...

So I go to the iLok site, download it and install it. Pro Tools First still won't start. I realize that the PTF installer asked me to reboot, which I didn't do because: a) I always have a lot of windows open, and b) How often is a reboot ACTUALLY required? Why would you need to reboot?

So I (begrudgingly) reboot, and now the program seems to start initializing... but then it throws an error message about some plugin that it can't load because it doesn't work for the 64 bit version. Then... why are you even looking for it?
And then it says something like: 'I can't handle that, I'm just gonna shut down'.

What?

I try starting it again. Same error appears, but then it gets past it this time... Only to throw another error message about something else it can't load, and therefore it must shut down.

Deep breath.

Third time is the charm, the program actually made it to the project create/load screen! Huzzah!
So I look around a bit, but don't do much. It doesn't seem too intuitive to me, so I start watching some tutorials on YouTube from Avid themselves. It's a little late by now, so I don't get my hands dirty that day.

Next time I want to try out the program I start it up, still get error messages, but it does seem to initialize okay. But then the 'Create project' button doesn't react when I press it.

It turns out that the program takes a looong time to log in to the avid account, even though the manager service is running and logged in...

When it finally logs on I create a new blank project, but it doesn't ask me where to save it to. I see there is a counter saying 1/3 and looking around I find some info about 'cloud based projects'.

It would seem that this program only supports saving projects to the cloud, and you get only 3 projects total. Three. THREE?

Ahem...

I add an instrument track to my new project and select the one and only plugin, which is a synth. I don't see the plugin window, like in the tutorials I watched. I fiddle around with the windows, but I only manage to get the layout fucked up. There's a handy 'Window' menu, but none of the options resets the view. The main window is now sporting a WINDOWS FUCKING 7 BORDER! And partially blocking the view of the top menu.

Blaaargh!

Frustrated, I shut the program down and restart it. I now select one of the project templates (after waiting for it to LOG IN AGAIN!) in the hope that I might have a bit more luck with that starting point.

But when the template has loaded, out of nowhere, the program goes from maximized to windowed mode! And the fucking Win7 border is back again, still messing with the main menu!

FFS!

I get the sucker maximized again and select one of the synth tracks, and Lo and Behold! The synth plugin window actually shows up! But of course there is no sound produced when I play, neither with the keyboard or my midi keyboard.

Oh no, that would have been too easy.

I see some the meters moving when I play, but no sound is produced. I check the options menu, but find out nothing useful except for the fact that the program only support 48kHz sample rate. That's pretty disappointing when you have a 192kHz/24bit soundcard.

I'm done. This piece of shit software is NOT for me. It's bloated, complicated to sign up for and install, extremely limited and buggy as hell!

The final insult is that it takes 5 minutes to uninstall because there is no uninstall option in the so-called 'Application Manager' (of course fucking not!), and doing it through Programs & Features there are 5 (FIVE!!) different apps and services to uninstall, one by one.

0/10, would not recommend.

!(!(!(!(!(!(!(!rant)))))))
My new HTC smartphone hates me.
First it started to shut down all of the sudden yesterday night, when I was solving quadratic equations on my laptop.
I thought that it might be due to low battery. So I have restarted it. After putting itself into a bootloop for 4 start sequences, it was able to fully start to the page where it told me to enter the security pin to decrypt my files. I also had 30 attempts left. Like a ransomware.

I was like "tf I didn't set anything up".
So I decided to use my first attempt as I had 30 attempts left.
I entered the pin (I can swear that it's correct) and it told me that it has to wipe the /data partition.

I did that. I pressed that button. After waiting for 30 minutes I gave up and rebooted into the bootloader.
Bootloader -> Download Mode -> wipe /data (stock rom + stock recovery btw.)

Some error with "e: mount /cache failed[...]e: mount /data failed"
So, I tried using the adb sideload - no success.
Fastbooted into RUU Mode - HTC keeps rebooting itself into the RUU Mode - no success

Tried to flash the firmware and twrp recovery from Download mode - no success
Then I tried to flash all these things from the sd card - no success

Searched for revolutionary (I know this from my old HTC sensation device).
It wasn't big of any help.

Then someone on xda recommended htcDev (htc's <b>developer-friendly</b> lol site)
I followed every step. Everything seemed to be okay.
I got to the last step.
I needed to get my encrypted token by entering "fastboot oem get_identifier_token" to be able to submit it to HTC, and after they would send me an e-Mail with an .bin file that would let me unlock the bootloader to be able to flash my way through all this headache giving fucking piece of dog shit!

But since I can't back to the phone settings to select the bootloader activation box that would let me get my token... but nah.

FML

------------
Sent by using the devRant web app (:\)

Bug I had to fix today: some elements in our React app were being swapped with other elements.

We had `<foo>bar</foo>` on the component but on the html `foo` was being swapped with some other element in our app. It's contents ("bar" in the example) were being left in place, though, so we were getting `<baz>bar</baz>`.

This would only happen when running on production mode. On development everything was fine.

Also, everything seemed fine on the React dev tools. `foo` was where it was supposed to be, but on the html it was somewhere else.

Weirdest shit I ever saw when using React. I found a way to go around it and applied that fix, but I'm still trying to track this down to the source.

The worst part was waiting for fucking webpack to finish the production bundle on every fucking change I wanted to test. I didn't miss the change-save-compile-test flow at all.

What a shit day.

It all started with an undelivereable e-mail.

New manager (soon-to-be boss) walks into admin guy's office and complains about an e-mail he sent to a customer being rejected by the recipient's mail server. I can hear parts of the conversation from my office across the floor.

Recipient uses the spamcop.net blacklist and our mail was rejected since it came from an IP address known to be sending mails to their spamtrap.

Admin guy wants to verify the claim by trying to find out our static public IPv4 address, to compare it to the blacklisted one from the notification.
For half an hour boss and him are trying to find the correct login credentials for the telco's customer-self-care web interface.
Eventually they call telco's support to get new credentials, it turned out during the VoIP migration about six months ago we got new credentials that were apparently not noted anywhere.

Eventually admin guy can log in, and wonders why he can't see any static IP address listed there, calls support again. Turns out we were not even using a static IP address anymore since the VoIP change. Now it's not like we would be hosting any services that need to be publicly accessible, nor would all users send their e-mail via a local server (at least my machine is already configured to talk directly to the telco's smtp, but this was supposedly different in the good ol' days, so I'm not sure whether it still applies to some users).

In any case, the e-mail issue seems completely forgotten by now: Admin guy wants his static ip address back, negotiates with telco support.
The change will require new PPPoE credentials for the VDSL line, he apparently received them over the phone(?) and should update them in the CPE after they had disabled the login for the dynamic address. Obviously something went wrong, admin guy meanwhile having to use his private phone to call support, claims the credentials would be reverted immediately when he changed them in the CPE Web UI.

Now I'm not exactly sure why, there's two scenarios I could imagine:
- Maybe telco would use TR-069/CWMP to remotely provision the credentials which are not updated in their system, thus overwriting CPE to the old ones and don't allow for manual changes, or
- Maybe just a browser issue. The CPE's login page is not even rendered correctly in my browser, but then again I'm the only one at the company using Firefox Private Mode with Ghostery, so it can't be reproduced on another machine. At least viewing the login/status page works with IE11 though, no idea how badly-written the config stuff itself might be.

Many hours pass, I enjoy not being annoyed by incoming phone calls for the rest of the day. Boss is slightly less happy, no internet and no incoming calls.

Next morning, windows would ask me to classify this new network as public/work/private - apparently someone tried factory-resetting the CPE. Or did they even get a replacement!? Still no internet though.
Hours later, everything finally back to normal, no idea what exactly happened - but we have our old static IPv4 address back, still wondering what we need it for.

Oh, and the blacklisted IP address was just the telco's mail server, of course. They end up on the spamcop list every once in a while.

tl;dr: if you're running a business in Germany that needs e-mail, just don't send it via the big magenta monopoly - you would end up sharing the same mail servers with tons of small businesses that might not employ the most qualified people for securing their stuff, so they will naturally be pwned and abused for spam every once in a while, having your mailservers blacklisted.

I'm waiting for the day when the next e-mail will be blocked and manager / boss eventually wonder how the 24-hours-outage did not even fix aynything in the end...

Older tech support story, but still a frusterating one.

Sister was running Windows 8.1 (ew) when Microsoft was ramming Windows 10 down everyone's throat.

Her laptop decided to update to Windows 10, and after waiting awhile, she decided to unplug the laptop's battery and power chord.

This did what you expected, corrupted her install, leading to a bootloop. I then got to deal with that to try and recover it.

Once I got into the recovery mode, it wanted her password to restore from a system image, guess what she forgot?

She tried her PIN, and gave up after a few attempts, and I got to reinstall Windows for her.

Lesson learned from this? If you're the IT person of the house, make sure that you have an account on all machines that you may administrate. That way you don't need to deal with this shit.

So, I move house with my amazing, already configured and stable router with built in VPN, DDNS, Port forwarding and DHCP addresses.

Received ISP shitty router at new address and want to use as modem only, so I go read the manual.

"Bridge mode requires you to configure your other router with PPPoE and the ISP's credentials"

Landline is not working, so I cannot call the number to retrieve my password. After 2 days of waiting, engineer visits, installs master socket, dial tone yaaay.

Call number to get password, automated voice message has such a bad sound quality that I cannot figure out if it's saying F or S, and there are two of those letters.

Put ISP router in bridge mode, set other router to PPPoE and put credentials, nothing. Try with F and F, S and F, F and S, S and S... Nothing. Put it back to dynamic IP address, it works.

I resign myself and manually configure everything I had on the good router to the ISP one. A few issues with my server and DDNS, but hey, internet works.

Start missing the other functionality, try the password idiocy again. Nothing.

Next day, go to work, talk to a colleague that lives close and has the same provider: "I just put it into bridge mode and it worked".

Go back home, bridge mode on ISP router, Dynamic IP on good router, no credentials. It works.

Why do I always overcomplicate stuff?

(Warning: This rant includes nonsense, nightposting, unstructured thoughts, a dissenting opinion, and a purposeless, stupid joke in the beginning. Reader discretion is advised.)

honestly the whole "ARM solves every x86 problem!" thing doesn't seem to work out in my head:

- Not all ARM chips are the same, nor are they perfectly compatible with each other. This could lead to issues for consumers, for developers or both. There are toolchains that work with almost all of them... though endianness is still an issue, and you KNOW there's not gonna be an enforced standard. (These toolchains also don't do the best job on optimization.)

- ARM has a lot of interesting features. Not a lot of them have been rigorously checked for security, as they aren't as common as x86 CPUs. That's a nightmare on its own.

- ARM or Thumb? I can already see some large company is going to INSIST AND ENFORCE everything used internally to 100% be a specific mode for some bullshit reason. That's already not fun on a higher level, i.e. what software can be used for dev work, etc.

- Backwards compatibility. Most companies either over-embrace change and nothing is guaranteed to work at any given time, or become so set in their ways they're still pulling Amigas and 386 machines out of their teeth to this day. The latter seems to be a larger portion of companies from what I see when people have issues working with said company, so x86 carryover is going to be required that is both relatively flawless AND fairly fast, which isn't really doable.

- The awkward adjustment period. Dear fuck, if you thought early UEFI and GPT implementations were rough, how do you think changing the hardware model will go? We don't even have a standard for the new model yet! What will we keep? What will we replace? What ARM version will we use? All the hardware we use is so dependent on knowing exactly what other hardware will do that changing out the processor has a high likelihood of not being enough.

I'm just waiting for another clusterfuck of multiple non-standard branching sets of PCs to happen over this. I know it has a decent chance of happening, we can't follow standards very well even now, and it's been 30+ years since they were widely accepted.

Music, but if it has words they need to be foreign. J-rock, deadmau5, gogo penguin, carrion... All are good.
Dark themes everywhere unless it's java, because it helps me compartmentalise my languages.
Second screen hooked up with the stuff I want to be viewable all the time, as it doesn't change when I switch workspaces. (bug or a feauture?)
Door shut to muffle sounds from the rest of the house, window slightly open so I don't suffocate.
Pomodoro timer on, but put phone into silent mode so no notifications disrupt my focus.
Drinks and bathroom breaks happen in the 5 minutes between pomodoro sprints. Food happens in the 15 minute breaks.
Extra RAM stick is in the mail so I lose less time waiting for android studio to exhale or whatever it's doing as it holds up the whole computer.
I might just do the java parts of my project in bluej if this ram stick doesn't alleviate my problems. I could go outside and drink mud through a metre long straw with a filter on the end sooner than android studio gets unstuck.
If anyone can add more sensible ideas I'd be happy :)

Just moved flats with a last minute confirmation, sadly the flat in question is not eligible for fibre broadband (high-rise) so had to settle for good old ASDL.

Find a good deal (as all providers are offering the same speeds/technology, all ASDL broadband is provided in the UK through BT landlines) to discover there is a mandatory 2 week waiting period to switch over ownership...

Fine, will wait 10 days for internet (torture except from dev rant on mobile internet, thanks for being text only), box arrives 3 days ago stating not to plug it in until activation date...

Fine I shall wait, today I get impatient and setup the router without connecting it to the landline so I can use the WiFi to connect to my Nas etc, login to WiFi navigate to Nas IP .... Automatic reroute to "login" page "We have detected your router is not connected to the landline, ensure your router is properly connected". Try logging into management site, works, change admin password etc. No setting to disable "self heal" functionality. No setting to setup static routes for my lab router, No setting to switch to modem only mode for when I inevitably buy a new wireless router for when this piece of crap can't handle the internal network traffic...

All this for a pitiful 10/? Mbps average, I want my fibre connection back :'(

This shit is long story of my computer experience over my lifetime.

When I was young I got my first PC with windows it was not so bad. It required safe shut down of it’s fat32 partition. From time to time I needed to reinstall it cause of slow down but I got used to it I was only a gamer.

Time passes and I got more curious about computers and about this linux. Everything worked there but installation of anything was complete madness and none of windows programs worked well, and I wanted to play games and be productive so I sticked with windows.

I bought hp laptop once with nvidia card, it was overheating and got broken. So I bought toshiba and all I told to the seller was I want ATI card. Took me 5 minutes to do it and I was faster then my friend buying pack of cigarettes because I was earning money using computer.

Then I grown up running my small one person programming businesses and I wanted to run and compile every fucking program on this world. I wanted linux shell commands. I wanted package manager, and I wanted my os to be simple because I wasn’t earning money by using my os but by programming. So after getting my paycheck I bought mac. I can run windows and linux on vm if I need it. I try not to steal someones work so I didn’t want to run hackintosh. I am using this mac for some time.

Also I use playstation for gaming. Because I only want to run and play game I am not excited about graphics but gameplay. I think I am pragmatic person.

I can tell you something about my mac.
When I close lid it go sleep when I open it wakes up instantly. I never need to wonder if I want to hibernate or shut down or sleep and drain battery. It is fucking simple.
When I want to run or open something it doesn’t want me to wait but it gives me my intellij or terminal or another browser or whatever I search for. Yeah search is something that works.
Despite it got 8 gigs of ram I can run whatever number of programs I want at the same speed. The speed is not very fast sometimes but it’s constant fast.
I have a keychain so my passwords are in one place I can slow down shared internet speed, I can put my wifi in monitor mode and I don’t need to install some 3rd party software.
And now I updated my mac to high sierra, cause it’s free and I want to play with ios compilation. Before I did it I didn’t even backup whole work. I just used time machine and regular backups. And guess what, it still works at the same speed and all I did was click to run update and cook something to eat.
When I got bored I close the lid, when got idea open lid and code shit, not waiting for fucking wakeup or fucking updates.

I wanted to rant apple products I use but they work, they got fucking updates all along at the same time. And all of updates are optional.

I cannot tell that about all apple products but about products I use.

I think I just got old and started to praise my limited time on this world. Not being excited about new crap. When I buy something I choose wisely. I bought iPhone. I can buy latest iPhone x but I bought iPhone 7 cause it’s from fucking metal. And I know that metal is harder then glass, why the fucking apple forgot about it? I don’t know.
I know that I am clumsy and drop stuff. Dropped my phone at least 100 times and nothing.

I am not a apple fan boy I won’t buy mac with this glowing shit above keyboard that would got me blind at night.
I buy something when I know that it can save my time on this world. I try to buy things that make me productive and don’t break after a year.

So now piece of advise, stop wasting your time, buy and update wisely, wait a week or a month or a year when more people buy shit and buy what’s not broken. And if something’s broken rant this shit so next customer can be smarter.
Cheers

So they asked us all to come in today because we need to take a staff photo. Okay. Then they decide to actually do it tomorrow. Unfortunately my dumbass ADHD brain has entered waiting mode

A CASE AGAINST BLUE PRISM
Let's review one of the worst weeks I had with Blue Prism

Monday: Yay! Solved one of the problems we've been carrying around for a week before.

One of the robots suddenly became slow. Like, REAL slow. A process that would take 3 minutes per record now takes 45, and that broke apart all the following schedule.

There were no updates on the application server, the production machine, the robot, it just became slow. And not always slow; a process manually run from console room would work, a process in debug room would work, it's just the scheduled part that caused problems.

It turned out, BP didn't seem to like that particular combination of schedulation + process + machine. Moving the process to a different machine seemingly fixed that. IDK why.

Tuesday: One of our processes waits for a code to appear in the page, and when that happens, it memorizes this code. However, now it is always returning blank. Worked for months, now it breaks every single time.
After half a day of debugging a bug which DIDN'T HAPPEN IN DEBUG MODE YET AGAIN, at 11pm I decided to just place a nonsensical timeout in page before reading and call it a day.

WEDNESDAY: a scheduled process didn't start. "No sessions created". Thanks Blue Prism, very cool.

THURSTAY: This time, schedulation did start, but the process is "waiting". As in: it's 9:30 am, the process has been stuck in the same step since 6:00 am. Turns out, it blocked during a navigate stage; you need to send a string to clipboard using the standard BP action for that, then paste and click "enter", but for some reason the standard BP object sent "ORRCO" instead of "ORRICO" to clipboard, which obviously returned no results and then... the process just didn't feel like doing things anymore. No errors, no logs, nothing: just sitting on its ass. Because fuck you that's why.

Friday: another process uses a very moderate amount of scripts to work. Nothing really fancy, just a couple of lines of code to place in page some IDs and selector to help BP do its thing, otherwise selecting these elements would be a nightmare.

But

Failed while invoking javascript method:Exception from HRESULT: 0x80020101-> at mshtml.HTMLWindow2Class.IHTMLWindow2_execScript(String code, String language)

The same script -it's not dynamically generated-worked yesterday, the day before and the day after. But sometimes it will not. Why? The answer, my friend, is blowin'' in the wind

Messaged my practice lead (and also good friend) with a root cause analysis as well as proposal on how to fix a problem after migration to mysql 5.7.

Now I’m waiting in defense mode to strike me back with his violent wisdom.

Task Manager in Windows 11 now has dark mode. Feels good; I have been waiting for it 📈😎

Rant/ Question.

I've lost count how many times windows has decided to wake itself up from sleep mode to update. Sometimes it doesn't even update, I will be laying in bed and it will turn on, I will then have to sit up for half an hour waiting for it to finish (otherwise my pc will just be on all night) then when it is finally done, I will get up and go to turn it off and it says "Turn off and update" and need to update again.

To make it worse, it restarts itself while updating, so all the stuff I wanted to keep open by putting it in sleep mode will be gone.

Is there any way to prevent windows from doing this update during sleep mode? If not I am going to need to completely turn off my PCs power when it is in sleep mode, which it just a pain for me.