Bought a Logitech G13 a few years ago knowing that the Linux support isn't good. Thought fuck it, I'll develop something for it.

That didn't go as planned. Tried numerous times to write something but the fucker is proprietary and I couldn't figure out how to get data from it.

Decided to try it again tonight with a "You're not winning this time, motherfucker!" mindset.

Figured out how to read data from it, looked long enough at the data coming in to discover patterns and started programming while testing my ass off.

Two hours later I have "mapped" all specific data points that the device sends to the hardware keys and now, whenever I have the device connected and run the program (node, no kidding), it displays which key I'm pressing when I press a key!

I finally fucking won.

Apple has a real problem.

Their hardware has always been overpriced, but at least before it had defenders pointing out that it was at least capable and well made.

I know, I used to be one of them.

Past tense.

They have jumped the shark.

They now make pretentious hipster crap that is massively overpriced and doesn't have the basic features (like hardware ports) to enable you to do your job.

I mean, who needs an ESC key? What is wrong with learning to type CTRL-[ instead? Muscle memory? What's that?

They have gone from "It just works" to "It just doesn't work" in no time at all.

And it is Developers who are most pissed off. A tiny demographic who won't be visible on the financial bottom line until their newly absent software suddenly makes itself known two, three years down the line.

By which time it is too late to do anything.

But hey! Look how thin (and thermally throttled) my new laptop is!

I really, honestly, am getting annoyed when someone tells me that "Linux is user-friendly". Some people seem to think that because they themselves can install Linux, that anyone can, and because I still use Windows I'm some sort of a noob.

So let me tell you why I don't use Linux: because it never actually "just works". I have tried, at the very least two dozen times, to install one distro or another on a machine that I owned. Never, not even once, not even *close*, has it installed and worked without failing on some part of my hardware.

My last experience was with Ubuntu 17.04, supposed to have great hardware and software support. I have a popular Dell Alienware machine with extremely common hardware (please don't hate me, I had a great deal through work with an interest-free loan to buy it!), and I thought for just one moment that maybe Ubuntu had reached the point where it just, y'know, fucking worked when installing it... but no. Not a chance.

It started with my monitors. My secondary monitor that worked fine on Windows and never once failed to display anything, simply didn't work. It wasn't detected, it didn't turn on, it just failed. After hours of toiling with bash commands and fucking around in x conf files, I finally figured out that for some reason, it didn't like my two IDENTICAL monitors on IDENTICAL cables on the SAME video card. I fixed it by using a DVI to HDMI adapter....

Then was my sound card. It appeared to be detected and working, but it was playing at like 0.01% volume. The system volume was fine, the speaker volume was fine, everything appeared great except I literally had no fucking sound. I tried everything from using the front output to checking if it was going to my display through HDMI to "switching the audio sublayer from alsa to whatever the hell other thing exists" but nothing worked. I gave up.

My mouse? Hell. It's a Corsair Gaming mouse, nothing fancy, it only has a couple extra buttons - none of those worked, not even the goddamn scrollwheel. I didn't expect the *lights* to work, but the "back" and "Forward" buttons? COME ON. After an hour, I just gave up.

My media keyboard that's like 15 years old and is of IBM brand obviously wasn't recognized. Didn't even bother with that one.

Of my 3 different network adapters (2 connectors, one wifi), only one physical card was detected. Bluetooth didn't work. At this point I was so tired of finding things that didn't work that I tried something else.

My work VPN... holy shit have you ever tried configuring a corporate VPN on Linux? Goddamn. On windows it's "next next next finish then enter your username/password" and on Linux it's "get this specific format TLS certificate from your IT with a private key and put it in this network conf and then run this whatever command to...." yeah no.

And don't get me started on even attempting to play GAMES on this fucking OS. I mean, even installing the graphic drivers? Never in my life have I had to *exit the GUI layer of an OS* to install a graphic driver. That would be like dropping down to MS-DOS on Windows to install Nvidia drivers. Holy shit what the fuck guys. And don't get me started on WINE, I ain't touching this "not an emulator emulator" with a 10-foot pole.

And then, you start reading online for all these problems and it's a mix of "here are 9038245 steps to fix your problem in the terminal" and "fucking noob go back to Windows if you can't deal with it" posts.

It's SO FUCKING FRUSTRATING, I spent a whole day trying to get a BASIC system up and running, where it takes a half-hour AT MOST with any version of Windows. I'm just... done.

I will give Ubuntu one redeeming quality, however. On the Live USB, you can use the `dd` command to mirror a whole drive in a few minutes. And when you're doing fucking around with this piece of shit OS that refuses to do simple things like "playing audio", `dd` will restore Windows right back to where it was as if Ubuntu never existed in the first place.

Thanks, `dd`. I wish you were on Windows. Your OS is the LEAST user friendly thing I've ever had to deal with.

You know side projects? Well I took on one. An old customer asked to come and take over his latest startups companys tech. Why not, I tought. Idea is sound. Customer base is ripe and ready to pay.

I start digging and the Hardware part is awesome. The guys doing the soldering and imbedded are geniuses. I was impressed AF.

I commit and meet up with CEO. A guy with a vision and sales orientation/contacts. Nice! This shit is gonna sell. Production lines are also set.

Website? WTF is this shit. Owner made it. Gotta give him the credit. Dude doesn't do computers and still managed to online something. He is still better at sales so we agree that he's gonna stick with those and I'll handle the tech.

I bootstrap a new one in my own simplistic style and online it. I like it. The owner likes it. He made me to stick to a tacky logo. I love CSS and bootstrap. You can make shit look good quick.

But I still don't have access to the soul of the product. DBs millions rows of data and source for the app I still behind the guy that has been doing this for over a year.

He has been working on a new version for quite some time. He granted access to the new versions source, but back end and DB is still out of reach. Now for over month has passed and it's still no new version or access to data.

Source has no documentation and made in a flavor of JS frame I'm not familiar with. Weekend later of crazy cramming I get up to speed and it's clear I can't get further without the friggin data.

The V2 is a scramble of bleeding edge of Alpha tech that isn't ready for production and is clearly just a paid training period for the dev. And clearly it isn't going so well because release is a month late. I try to contact, but no reaction. The owner is clueless.

Disheartening. A good idea is going to waste because of some "dev" dropping a ball and stonewalling the backup.

I fucking give him till the end of the next week until I make the hardware team a new api to push the data and refactor the whole thing in proper technologies and cut him off.

Please. If you are a dev and don't have the time to concentrate on the solution don't take it on and kill off the idea. You guys are the key to making things happening and working. Demand your cut but also deserve it by delivering or at least have the balls to tell you are not up for it.

Actual rant time. And oh boy, is it pissy.

If you've read my posts, you've caught glimpses of this struggle. And it's come to quite a head.

First off, let it be known that WINDOWS Boot Manager ate GRUB, not the other way around. Windows was the instigator here. And when I reinstalled GRUB, Windows threw a tantrum and won't boot anymore. I went through every obvious fix, everything tech support would ever think of, before I called them. I just got this laptop this week, so it must be in warranty, right? Wrong. The reseller only accepts it unopened, and the manufacturer only covers hardware issues. I found this after screaming past a pretty idiotic 'customer representative' ("Thank you for answering basic questions. Thank you for your patience. Thank you for repeating obvious information I didn't catch the first three times you said it. Thank you for letting me follow my script." For real. Are you tech support, or emotional support? You sound like a middle school counselor.) to an xkcd-shibboleth type 'advanced support'. All of this only to be told, "No, you can't fix it yourself, because we won't give you the license key YOU already bought with the computer." And we already know there's no way Microsoft is going to swoop in and save the day. It's their product that's so faulty in the first place. (Debian is perfectly fine.)

So I found a hidden partition with a single file called 'Image' and I'm currently researching how to reverse-engineer WIM and SWM files to basically replicate Dell's manufacturing process because they won't take it back even to do a simple factory reset and send it right back.

What the fuck, Dell.

As for you, Microsoft, you're going to make it so difficult to use your shit product that I have to choose between an arduous, dangerous, and likely illegal process to reclaim what I ALREADY BOUGHT, or just _not use_ a license key? (Which, there's no penalty for that.) Why am I going so far out of my way to legitimize myself to you, when you're probably selling backdoors and private data of mine anyway? Why do I owe you anything?

Oh, right. Because I couldn't get Fallout 3 to run in Wine. Because the game industry follows money, not common sense. Because you marketed upon idiocy and cheapness and won a global share.

Fuck you. Fuck everything. Gah.

VS Code is pretty good, though.

"Thank you for choosing Microsoft!"

No Microsoft, I really didn't choose you. This crappy hardware made you the inevitable, not a choice.

And like hell do I want to run your crappy shit OS. I tried to reset my PC, got all my programs removed (because that's obviously where the errors are, not the OS, right? Certified motherfuckers). Yet the shit still didn't get resolved even after a reset. Installing Windows freshly again, because "I chose this".

Give me a break, Microshaft. If it wasn't for your crappy OS, I would've gone to sleep hours ago. Yet me disabling your shitty telemetry brought this shit upon me, by disabling me to get Insider updates just because I added a registry key and disabled a service. Just how much are you going to force data collection out of your "nothing to hide, nothing to fear" users, Microsoft?

Honestly, at this point I think that Microsoft under Ballmer might've been better. Because while Linux was apparently cancer back then, at least this shitty data collection for "a free OS" wasn't yet a thing back then.

My mother still runs Vista, an OS that has since a few months ago reached EOL. Last time she visited me I recommended her to switch to Windows 7, because it looks the same but is better in terms of performance and is still supported. She refused, because it might damage her configurations. Granted, that's probably full of malware but at this point I'm glad she did.

Even Windows 7 has telemetry forcibly enabled at this point. Vista may be unsupported, but at least it didn't fall victim to the current status quo - data mining on every Microshaft OS that's still supported.

Microsoft may have been shady ever since they pursued manufacturers into defaulting to their OS, and GPU manufacturers will probably also have been lobbied into supporting Windows exclusively. But this data mining shit? Not even the Ballmer era was as horrible as this. My mother may not realize it, but she unknowingly avoided it.

Because of hardware failure we had to move some vpns from one datacenter to another.

The team of highly untrained monkeys at my hosting provider were hired to do this. First they ran backups of all the systems. Then they started the moving process. A few hours later they were done. We got an email everything was back online.

So we restarted all our processes and no data was coming in from our Raspberry's around the country. So we start a little investigation. What did these buffons do, they changed our rsa keys.

So we kindly ask them to put the old keys back so we do not have to fix 200 changed key warnings on systems that are not remotely accesible.

Apperently something that can't be done because their back up process is automated and always makes new keys.

Holy fucking fuck, whats the point in having a backup its not an exact copy. Is this fucking normal?

Now I will be spending the next few weeks literally standing in cow shit reconnecting Raspberry's.

Thanks a fucking lot. Not!

Hardware of laptops today.
Displays: Glossy screens everywhere. "Hurr durr it has better colors". Idgaf what colors it has, when the only thing I can see is the wall behind me and my own reflection. Make it matte or get it out.
Touchpads: Bring back mechanical buttons. Haptic feedback dying with touchscreens/surfaces is a tragedy. "But we can have bigger touchpad area without buttons" ...why? the goal shouldn't be 1:1 touchpad vs. display ratio. It ain't a bloody tablet.
Docking stations: Some bright fucker figured out that they can utilize USB C. That thing keeps falling out with slightest laptop movement disconnecting all peripherals (guess why microUSB had those small hooks?). Also it doesn't have sufficient throughput, so the 5 years old dock can feed 3 full HD monitors just fine and the new one can't.
Keyboards: Personally I hate chiclet. And it's everywhere, because "apple has it so we must too". But the thing I hate even more is retardation of the arrow keys (up and down merged into size of one key), missing dedicated Home/End/PgDwn/PgUp buttons and somebody deciding the F keys are not needed and started replacing them with some multimedia bullshit.

My overall feeling is that this happens when you give the market to designers and customer demand. You end up with eye candy and useless fancy gadgets, with lowered ergonomy and worse features than previous generations of the same hardware. My laptop dying is my daily nightmare as I have no idea with what on the current market I would replace it.

A few hours ago I decided it was a good idea to to clean up my keyboard. I did so and took a walk leaving the keys to dry.

After I came back I hoovered the -board and decided to put back the keys. I started with the special keys since they were the easiest to find (and some required a metal thing).

Now, I was quickly made aware of something that I had never known nor noticed before. Bear with me here as I'm not a person that cares too much about hardware unless I need to. (Hardware here meaning stuff like mice, keyboards, headsets, and stuff like that). But I learned that

Not all keys are the same size. They look really similar to someone like me. But I manned up and put the keys back.

A little under 1.5 hours later and I now posses a keyboard that is in uncanny valley. It doesn't feel like it though, and it shouldn't be that big of a problem since I never look at my keyboard anyway.

Messaged one of my m8's about and this was his reply

"nope
one kind per row
usually says the row on the underside"

Now fantasize about the elasmobranch fish which is characterized by a cartilaginous skeleton of which I am the proprietor at what he said. I pulled a key out and, sure enough, "C28 R1".

Now I am not sure about the 28th column, but it did fit in the first row.

Fuck me

TLDR: There’s truth in the motto “fake it till you make it”

Once upon a time in January 2018 I began work as a part time sysadmin intern for a small financial firm in the rural US. This company is family owned, and the family doesn’t understand or invest in the technology their business is built on. I’m hired on because of my minor background in Cisco networking and Mac repair/administration.

I was the only staff member with vendor certifications and any background in networking / systems administration / computer hardware. There is an overtaxed web developer doing sysadmin/desktop support work and hating it.

I quickly take that part of his job and become the “if it has electricity it’s his job to fix it” guy. I troubleshoot Exchange server and Active Directory problems, configure cloudhosted web servers and DNS records, change lightbulbs and reboot printers in the office.

After realizing that I’m not an intern but actually just a cheap sysadmin I began looking for work that pays appropriately and is full time. I also change my email signature to say “Company Name: Network Administrator”

A few weeks later the “HR” department (we have 30 employees, it’s more like “The accountant who checks hiring paperwork”) sends out an email saying that certain ‘key’ departments have no coverage at inappropriate times. I don’t connect the dots.

Two days later I receive a testy email from one of the owners telling me that she is unhappy with my lack of time spent in the office. That as the Network Administrator I have responsibilities, and I need to be available for her and others 8-5 when problems need troubleshooting. Her son is my “boss” who is rarely in the office and has almost no technical acumen. He neglected to inform her that I’m a part time employee.

I arrange a meeting in which I propose that I be hired on full time as the Network Administrator to alleviate their problems. They agree but wildly underpay me. I continue searching for work but now my resume says Network Administrator.

Two weeks ago I accepted a job offer for double my current salary at a local software development firm as a junior automation engineer. They said they hired me on with so little experience specifically because of my networking background, which their ops dept is weak in. I highlighted my 6 months experience as Network Administrator during my interviews.

My take away: Perception matters more than reality. If you start acting like something, people will treat you like that.

I hate buying new laptops. HATE IT. The manufacturers are always trying to do something that makes it more complicated to buy a laptop confidently.

Why not name all of the laptops with numbers? Make them really hard to differentiate. Then offer the same model number across multiple years so it is difficult to determine which year the laptop is from.

Oh. And let’s make sure every laptop has a major flaw in the form factor.

Let’a add a numpad that squishes the keyboard to the left in a weird way. Lets do something to the trackpad to make it awkward to use. Maybe the keyboard should have a weird configuration. Maybe we can put 4 spare characters of various colours on the symbol key caps. How about a battery only lasts a few hours. May we add specialized hardware so you are stuck with windows. Maybe we can make it super thick and heavy. Lets have a screen with terrible viewing angles. Since this laptop has no major flaws we should overprice it. No repairs or upgrades on this one because we filled the computer with glue. Lets double the amount of useless media keys.

It is like manufacturers are trying to design laptops like RPG game character classes. The fighter has no magic or stealth. The magician is weak and gets fatigued. The rogue is very stealthy but has poor defence and attack. The cleric can use magic but only to heal so it is useless in battle. The ranger is good at distance but has poor defence and no magic.

The only notebooks sold that are trying to make balanced character classes are MacBooks. Those cost a premium and aren’t reparable.

So I Bought this bio metric pad lock for my daughter. She excitedly tried to set it up without following the directions( they actually have good directions on line) first thing you do is set the "master print" she buggered that up setting her print. So when I got home I was thinking, no problem I'll just do a reset and then we cant start again.

NOPE !!! you only have one chance to set the master print! after that if you want to reset the thing you need to use the master print along with a physical key that comes with it.

What sort if Moron designs hardware / software that is unable to be reset. Imagine how much fun it would be if once you set your router admin password it was permanent unless you can long back in to change it. Yea nobody has ever forgotten a password.

Well they are about to learn a valuable financial lesson about how user friendly design will influence your bottom line. people (me) will just return the lock to the store where they bought it, and it will have to be shipped back to the factory and will be very expensive for them paying for all of the shipping to and from and resetting and repackaging of the locks and finally shipping again to another store. Meanwhile I'll keep getting new locks until at no cost until she gets it right.

poor design

I haven't ranted for today, but I figured that I'd post a summary.
A public diary of sorts.. devRant is amazing, it even allows me to post the stuff that I'd otherwise put on a piece of paper and probably discard over time. And with keyboard support at that <3

Today has been a productive day for me. Laptop got restored with a "pacman -Syu" over a Bluetooth mobile data tethering from my phone, said phone got upgraded to an unofficial Android 9 (Pie) thanks to a comment from @undef, etc.

I've also made myself a reliable USB extension cord to be able to extend the 20-30cm USB-A male to USB-C male cord that Huawei delivered with my Nexus 6P. The USB-C to USB-C cord that allows for fast charging is unreliable.. ordered some USB-C plugs for that, in order to make some high power wire with that when they arrive.

So that plug I've made.. USB-A male to USB-A female, in which my short USB-C to USB-A wire can plug in. It's a 1M wire, with 18AWG wire for its power lines and 28AWG wires for its data lines. The 18AWG power lines can carry up to 10A of current, while the 28AWG lines can carry up to 1A. All wires were made into 1M pieces. These resulted in a very low impedance path for all of them, my multimeter measured no more than 200 milliohms across them, though I'll have to verify and finetune that on my oscilloscope with 4-wire measurement.

So the wire was good. Easy too, I just had to look up the pinout and replicate that on the male part.

That's where the rant part comes in.. in fact I've got quite uncomfortable with sentences that don't include at least one swear word at this point. All hail to devRant for allowing me to put them out there without guilt.. it changed my very mind <3

Microshaft WanBLowS.

I've tried to plug my DIY extension cord into it, and plugged my phone and some USB stick into it of which I've completely forgot the filesystem. Windows certainly doesn't support it.. turns out that it was LUKS. More about that later.

Windows returned that it didn't support either of them, due to "malfunctioning at the USB device". So I went ahead and plugged in my phone directly.. works without a problem. Then I went ahead and troubleshooted the wire I've just made with a multimeter, to check for shorts.. none at all.

At that point I suspected that WanBLowS was the issue, so I booted up my (at the time) problematic Arch laptop and did the exact same thing there, testing that USB stick and my phone there by plugging it through the extension wire. Shit just worked like that. The USB stick was a LUKS medium and apparently a clone of my SanDisk rootfs that I'm storing my Arch Linux on my laptop at at the time.. an unfinished migration project (SanDisk is unstable, my other DM sticks are quite stable). The USB stick consumed about 20mA so no big deal for any USB controller. The phone consumed about 500mA (which is standard USB 2.0 so no surprise) and worked fine as well.. although the HP laptop dropped the voltage to ~4.8V like that, unlike 5.1V which is nominal for USB. Still worked without a problem.

So clearly Windows is the problem here, and this provides me one more reason to hate that piece of shit OS. Windows lovers may say that it's an issue with my particular hardware, which maybe it is. I've done the Windows plugging solely through a USB 3.0 hub, which was plugged into a USB 3.0 port on the host. Now USB 3.0 is supposed to be able to carry up to 1A rather than 500mA, so I expect all the components in there to be beefier. I've also tested the hub as part of a review, and it can carry about 1A no problem, although it seems like its supply lines aren't shorted to VCC on the host, like a sensible hub would. Instead I suspect that it's going through the hub's controller.

Regardless, this is clearly a bad design. One of the USB data lines is biased to ~3.3V if memory serves me right, while the other is biased to 300mV. The latter could impose a problem.. but again, the current path was of a very low impedance of 200milliohms at most. Meanwhile the direct connection that omits the ~200ohm extension wire worked just fine. Even 300mV wouldn't degrade significantly over such a resistance. So this is most likely a Windows problem.

That aside, the extension cord works fine in Linux. So I've used that as a charging connection while upgrading my Arch laptop (which as you may know has internet issues at the time) over Bluetooth, through a shared BNEP connection (Bluetooth tethering) from my phone. Mobile data since I didn't set up my WiFi in this new Pie ROM yet. Worked fine, fixed my WiFi. Currently it's back in my network as my fully-fledged development host. So that way I'll be able to work again on @Floydian's LinkHub repository. My laptop's the only one who currently holds the private key for signing commits for git$(rm -rf ~/*)@nixmagic.com, hence why my development has been impeded. My tablet doesn't have them. Guess I'll commit somewhere tomorrow.

(looks like my rant is too long, continue in comments)

So after 6 months of asking for production API token we've finally received it. It got physically delivered by a courier, passed as a text file on a CD. We didn't have a CD drive. Now we do. Because security. Only it turned out to be encrypted with our old public key so they had to redo the whole process. With our current public key. That they couldn't just download, because security, and demanded it to be passed in the fucking same way first. Luckily our hardware guy anticipated this and the CD drives he got can burn as well. So another two weeks passed and finally we got a visit from the courier again. But wait! The file was signed by two people and the signatures weren't trusted, both fingerprints I had to verify by phone, because security, and one of them was on vacation... until today when they finally called back and I could overwrite that fucking token and push to staging environment before the final push to prod.

Only for some reason I couldn't commit. Because the production token was exactly the same as the fucking test token so there was *nothing to commit!*

BECAUSE FUCKING SECURITY!

OpenSSH 8.2 is out. This release removes support for the ssh-rsa key algorithm. The better alternatives include:

1. RSA SHA-2 signature algorithms rsa-sha2-256/512. These algorithms have the advantage of using the same key type as "ssh-rsa" but use the safe SHA-2 hash algorithms (now used by default if the client and server support them).

2. The ssh-ed25519 signature algorithm.

3. ECDSA algorithms: ecdsa-sha2-nistp256/384/521.

In this release, support for FIDO/U2F hardware tokens. Also noteworthy, a future release of OpenSSH will enable UpdateHostKeys by default to allow the client to automatically migrate to better algorithms.

So recently I installed Windows 7 on my thiccpad to get Hyperdimension Neptunia to run (yes 50GB wasted just to run a game)... And boy did I love the experience.

ThinkPads are business hardware, remember that. And it's been booting Debian rock solid since.. pretty much forever. There are no hardware issues here. Just saying.

With that out of the way I flashed Windows 7 Ultimate on a USB stick and attempted to boot it... Oh yay, first hurdle to overcome. It can't boot in UEFI mode. Move on Debian, you too shall boot in BIOS mode now! But okay, whatever right. So I set it to BIOS mode and shuffled Debian's partitions around a bit to be left with 3 partitions where Windows could stick in one more.

Installed, it asks for activation. Now my ThinkPad comes with a Windows 7 Pro license key, so fuck it let's just use that and Windows will be able to disable the features that are only available for Ultimate users, right? How convenient would that be, to have one ISO for all the half a dozen editions that each Windows release has? And have the system just disable (or since we're in the installer anyway, not install them in the first place) features depending on what key you used? Haha no, this is Microsoft! Developers developers developers DEVELOPERS!!! Oh and Zune, if anyone remembers that clusterfuck. Crackhead Microsoft.

But okay whatever, no activation then and I'll just fetch Windows Loader from my webserver afterwards to keygen my way through. Too bad you didn't accept that key Microsoft! Wouldn't that have been nice.

So finally booted into the installed system now, and behold finally we find something nice! Apparently Windows 7 Enterprise and Ultimate offer a native NFS driver. That's awesome! That way I don't have to adjust my file server at all. Just some fuckery with registry keys to get the UID and GID correct, but I'll forgive it for that. It's not exactly "native" to Windows after all. The fact that it even has a built-in driver for it is something I found pretty neat already.

Fast-forward a few hours and it's time to Re Boot.. drivers from Lenovo that required reboots and whatnot. Fire the system back up, and low and behold the network drive doesn't mount anymore. I've read that this is apparently due to Windows (not always but often) mounting the network drive before the network comes up. Absolutely brilliant! Move out shitstaind, have you seen this beauty of an init Mr. Poet?

But fuck it we can mount that manually after every single boot.. you know, convenient like that. C O P E.

With it now manually mounted, let's watch a movie! I've recently seen Pyro's review on The Platform and I absolutely loved it. The movie itself is quite good too. Open the directory on my file server and.. oh. Windows.. you just put db.thumb on it and db.thumb:encryptable. I shit you not, with the colon and everything. I thought that file names couldn't contain colons Windows! I thought that was illegal in NTFS. Why you doing this in NFS mate? And "encryptable", am I already infected with ransomware??? If it wasn't for the fact that that could also be disabled with something as easy as a registry key, I would've thought I contracted ransomware!

Oh and sound to go with that video, let's pair up some Bluetooth headphones with that Bluetooth driver I installed earlier! Except.. haha nope. Apparently you don't get that either.

Right so let's just navigate the system in its Aero glory... Gonna need to flick the mouse for that. Except it's excruciatingly slow, even the fastest speed is slower than what I'm used to on Linux.. and it's jerky as hell (Linux doesn't have any of that at higher speed). But hey it can compensate for that! Except that slows down the mouse even more. And occasionally the mouse driver gets fucked up too. Wanna scroll on Telegram messages in a chat where you're admin? Well fuck you mate, let me select all these messages for you and auto scroll at supersonic speeds! And God forbid that you press delete with that admin access of yours. Oh maybe I'll do it for you, helpful OS I am!

And the most saddening part of it all? I'd argue that Windows 7 is the best operating system that Microsoft ever released. Yeah. That's the best they could come up with. But at least it plays le games!

Hi devRant;

What’s your opinion on ‘open source’
Pros for and cons against its use. I’m curious

Reason for my question

I just met a programmer on the bus who is vehemently against open source starting he goes out of his way to not use anything ‘open source’

I myself use open source tools everyday in both my programming classes and outside projects. I vehemently believe the global collaboration potential of the open source concept is key to building bigger and better software and hardware in the future

Aren't you, software engineer, ashamed of being employed by Apple? How can you work for a company that lives and shit on the heads of millions of fellow developers like a giant tech leech?
Assuming you can find a sounding excuse for yourself, pretending its market's fault and not your shitty greed that lets you work for a company with incredibly malicious product, sales, marketing and support policies, how can you not feel your coders-pride being melted under BILLIONS of complains for whatever shitty product you have delivered for them?
Be it a web service that runs on 1980 servers with still the same stack (cough cough itunesconnect, membercenter, bug tracker, etc etc etc etc) incompatible with vast majority of modern browsers around (google at least sticks a "beta" close to it for a few years, it could work for a few decades for you);
be it your historical incapacity to build web UI;
be it the complete lack of any resemblance of valid documentation and lets not even mention manuals (oh you say that the "status" variable is "the status of the object"? no shit sherlock, thank you and no, a wwdc video is not a manual, i don't wanna hear 3 hours of bullshit to know that stupid workaround to a stupid uikit api you designed) for any API you have developed;
be it the predatory tactics on smaller companies (yeah its capitalism baby, whatever) and bending 90 degrees with giants like Amazon;
be it the closeness (christ, even your bugtracker is closed and we had to come up with openradar to share problems that you would anyway ignore for decades);
be it a desktop ui api that is so old and unmaintained and so shitty, but so shitty, that you made that cancer of electron a de facto standard for mainstream software on macos;
be it a IDE that i am disgusted to even name, xcrap, that has literally millions of complains for the same millions of issues you dont even care to answer to or even less try to justify;
be it that you dont disclose your long term plans and then pretend us to production-test and workaround-fix your shitty non-production ready useless new OS features;
be it that a nervous breakdown on a stupid little guy on the other side of the planet that happens to have paid to you dozens of thousands of euros (in mandatory licences and hardware) to actually let you take an indecent cut out of his revenues cos there is no other choice in a monopoly regime, matter zero to you;
Assuming all of these and much more:
How can you sleep at night with all the screams of the devs you are exploiting whispering in you mind? Are all the money your earn worth?

** As someone already told you elsewhere, HAVE SOME FUCKING PRIDE, shitty people AND WRITE THE FUCKING DOCS AND FIX THE FUCKING BUGS you lazy motherfuckers, your are paid more than 99.99% of people on earth, move your fucking greasy little fingers on that fucking keyboard. **

PT2: why the fuck did you remove the ESC key from your shitty keyboards you fuckshits? is it cos autocomplete is slower than me searching the correct name of a function on stackoverflow and hence ESC key is useless? at least your hardware colleagues had the decency of admitting their error and rolling back some of the uncountable "questionable "hardware design choices (cough cough ...magic mouse... cough golden charging cables not compatible with your own devices.. cough )?

Today I Fucked Up. I tried to do something involving hardware.
I tried to fix my mechanical keyboard by myself with no thought towards how electronics work. My first time using a soldering iron and trying to fix something myself.
I went from needing to replace one key to burning some plastic, failing to get new solder onto the parts to attach the new key to the PCB and getting solder where I didn't want it to needing a new keyboard because I think I've fried some stuff so badly half the bottom row of keys no longer works.
Fucking wonderful.
Guess it's time to buy a new keyboard.
Sigh.

DataDevNerd (ofc down to hardware bits)
Briefly blending amoung holiday tech consumers at Micro Center waiting for key-holder assistance @SSDs.

Rando: "they finally have a sale on *X, rebranded, price++* for my *ref'd only by part names* setup! What are you getting?"

Me: "replacement SSD, laptop's finally failing"

Rando: "Yeah, I totally get you, I hate that. How old is it? Hopefully you got a couple years outta it?"

Me: "over 7yrs old."
Rando: "Wow! Mustve not used it too much, still that's pretty long."

Me: "Actually, it's been my primary device, heavily used, as I'm a dev. I just know what/when to use SSD vs the HDD."

Rando: "Duuude, that's awesome!...wait...why haven't you just bought a new laptop yet?"

Me: "I'm not for hardware abuse or burning money"

I was quickly reminded why I tend to avoid typical consumer tech stores.

Coding chalenge.
So... Spent almost two hours to put this little device to work with the keypad.
The device is a arduino micro, special one that can work as mouse /keyboard or any kind of input on most devices (pc, Android phone,...)
The objective is to make a macro keypad to:
- Fast insert text
- Play sounds in games over voice chat.

Think of it like this, you start a new html file, press one key and all the base code is inserted.

So... Why so long? Tought was the hardware, tought the keypad could be set differently that most, code mistakes...

My error was all here, masked from the debugger by a if:

char keys[ROWS][COLS] = {
{'1','2','3','4'},
{'5','6','7','8'},
{'9','10','11','12'},
{'13','14','15','16'}
};

Easy to figure right? Only saw it after reading all the code twice.

Question for people familiar/knowledgeable about hardware keys;

Do you know if the OnlyKey could be considered safe/secure and if not, any idea as for alternatives?

My requirements would be nearly all the features that OnlyKey has, water/shockproof and the system should at least be open source.

#RANT_AHEAD

Almost everyone nowadays uses a PC, Laptop, Smartphone but sadly not even 60% of the total potential of the hardware is being used.
.
And no - you don't require custom cooling to use the whole 100% of the total potential, stock cooling is more than enough.
.
IRL "programmers" these days don't do any fscking effort to optimise their code and give it all up as some kinda shitty "hot patch" - code of their looks disturbing with no security features + optimisation. (wAnBlOwS products remain an example)
.
Even when you're using python you can push your project to limits. Instead of shoving face-size ASCII banners why don't chaps stress test their projects? Oh I forgot the community runs on show-offs and CVs ...

.
Note to Self : Optimisation is the key to integrate Technology with Nature.

After brute forced access to her hardware I spotted huge memory leak spreading on my key logger I just installed. She couldn’t resist right after my data reached her database so I inserted it once more to duplicate her primary key, she instantly locked my transaction and screamed so loud that all neighborhood was broadcasted with a message that exception is being raised. Right after she grabbed back of my stick just to push my exploit harder to it’s limits and make sure all stack trace is being logged into her security kernel log.
Fortunately my spyware was obfuscated and my metadata was hidden so despite she wanted to copy my code into her newly established kernel and clone it into new deadly weapon all my data went into temporary file I could flush right after my stick was unloaded.
Right after deeply scanning her localhost I removed my stick from her desktop and left the building, she was left alone again, loudly complaining about her security hole being exploited.
My work was done and I was preparing to break into another corporate security system.
- penetration tester diaries

I've left my MacBook to technical assistance for the thrid time. I've bought it on December (the touchbar model, on day one, arrives on December). I paid a lot for it and since then I got s broken key on my keyboard and a faulty display.
Now I got my battery swollen.

Fucking Apple. At least I'm happy with the OS and everything when it's hardware-faults free.

Oh yeah and I switched to MacBook for the construction quality... Bitter irony.

I hope this is the last fucking time, damn.

Can anyone help me with this theory about microprocessor, cpu and computers in general?

( I used to love programming when during school days when it was just basic searching/sorting and oop. Even in college , when it advanced to language details , compilers and data structures, i was fine. But subjects like coa and microprocessors, which kind of explains the working of hardware behind the brain that is a computer is so difficult to understand for me 😭😭😭)

How a computer works? All i knew was that when a bulb gets connected to a battery via wires, some metal inside it starts glowing and we see light. No magics involved till now.

Then came the von Neumann architecture which says a computer consists of 4 things : i/o devices, system bus ,memory and cpu. I/0 and memory interact with system bus, which is controlled by cpu . Thus cpu controls everything and that's how computer works.

Wait, what?
Let's take an easy example of calc. i pressed 1+2= on keyboard, it showed me '1+2=' and then '3'. How the hell that hapenned ?

Then some video told me this : every key in your keyboard is connected to a multiplexer which gives a special "code" to the processer regarding the key press.
The "control unit" of cpu commands the ram to store every character until '=' is pressed (which is a kind of interrupt telling the cpu to start processing) . RAM is simply a bunch of storage circuits (which can store some 1s) along with another bunch of circuits which can retrieve these data.

Up till now, the control unit knows that memory has (for eg):
Value 1 stored as 0001 at some address 34A
Value + stored as 11001101 at some address 34B
Value 2 stored as 0010 at some Address 23B

On recieving code for '=' press, the "control unit" commands the "alu" unit of cpu to fectch data from memory , understand it and calculate the result(i e the "fetch, decode and execute" cycle)

Alu fetches the "codes" from the memory, which translates to ADD 34A,23B i.e add the data stored at addresses 34a , 23b. The alu retrieves values present at given addresses, passes them through its adder circuit and puts the result at some new address 21H.

The control unit then fetches this result from new address and via, system busses, sends this new value to display's memory loaded at some memory port 4044.
The display picks it up and instantly shows it.

My problems:
1. Is this all correct? Does this only happens?

2. Please expand this more.
How is this system bus, alu, cpu , working?
What are the registers, accumulators , flip flops in the memory?
What are the machine cycles?
What are instructions cycles , opcodes, instruction codes ?
Where does assembly language comes in?
How does cpu manipulates memory?
This data bus , control bus, what are they?
I have come across so many weird words i dont understand dma, interrupts , memory mapped i/o devices, etc. Somebody please explain.

Ps : am learning about the fucking 8085 microprocessor in class and i can't even relate to basic computer architecture. I had flunked the coa paper which i now realise why, coz its so confusing. :'''(

Windows 11 kinda defeated me (although probably by my own fault of installing it on unsupported hardware).

I’ve been having horrible input lag whenever my system has been doing something CPU intensive - gaming, even copying files, to the point where I would have 2 second delay between key input and key being registered by the system.

I reverted back to Windows 10.

So as a personal project for work I decided to start data logging facility variables, it's something that we might need to pickup at some point in the future so decided to take the initiative since I'm the new guy.
I setup some basic current loop sensors are things like gas line pressures for bulk nitrogen and compressed air but decided to go with a more advanced system for logging the temperature and humidity in the labs. These sensors come with 'software' it's a web site you host internally. Cool so I just need to build a simple web server to run these PoE sensors. No big deal right, it's just an IIS service. Months after ordering Server 2019 though SSC I get 4 activation codes 2 MAK and 2 KMS. I won the lottery now i just have to download the server 2019 retail ISO and... Won't take the keys. Back to purchasing, "oh I can download that for you, what key is yours". Um... I dunno you sent me 4 Can I just get the link, "well you have to have a login". Ok what building are you in I'll drive over with a USB key (hoping there on the same campus), "the download keeps stopping, I'll contact the IT service in your building". a week later I get an install ISO and still no one knows that key is mine. Local IT service suggests it's probably a MAK key since I originally got a quote for a retail copy and we don't run a KMS server on the network I'm using for testing. We'll doesn't windows reject all 4 keys then proceed to register with a non-existent KMS server on the network I'm using for testing. Great so now this server that is supposed to connected to a private network for the sensors and use the second NIC for an internet connection has to be connected to the old network that I'm using for testing because that's where the KMS server seems to be. Ok no big deal the old network has internet except the powers that be want to migrate everything to the new more secure network but I still need to be connected to the KMS server because they sent me the wrong key. So I'm up to three network cards and some of my basic sensors are running on yet another network and I want to migrate the management software to this hardware to have all my data logging in one system. I had to label the Ethernet ports so I could hand over the hardware for certification and security scans.

So at this point I have my system running with a couple sensors setup with static IP's because I haven't had time to setup the DNS for the private network the sensors run on. Local IT goes to install McAfee and can't because it isn't compatible with anything after 1809 or later, I get a message back that " we only support up to 1709" I point out that it's server 2019, "Oh yeah, let me ask about that" a bunch of back and forth ensues and finally Local IT get's a version of McAfee that will install, runs security scan again i get a message back. " There are two high risk issues on your server", my blood pressure is getting high as well. The risks there looking at McAfee versions are out of date and windows Defender is disabled (because of McAfee).

There's a low risk issue as well, something relating to the DNS service I didn't fully setup. I tell local IT just disable it for now, then think we'll heck I'll remote in and do it. Nope can't remote into my server, oh they renamed it well that's lot going to stay that way but whatever oh here's the IP they assigned it, nope cant remote in no privileges. Ok so I run up three flights of stairs to local IT before they leave for the day log into my server yup RDP is enabled, odd but whatever let's delete the DNS role for now, nope you don't have admin privileges. Now I'm really getting displeased, I can;t have admin privileges on the network you want me to use to support the service on a system you can't support and I'm supposed to believe you can migrate the life safety systems you want us to move. I'm using my system to prove that the 2FA system works, at this rate I'm going to have 2FA access to a completely worthless broken system in a few years. good thing I rebuilt the whole server in a VM I'm planning to deploy before I get the official one back. I'm skipping a lot of the ridiculous back and forth conversations because the more I think about it the more irritated I get.

We're supporting hardware for a new client now. A guy on my team has been working directly with the client to set up access for us all. He sent us all an email yesterday, asking us to update a ticket with our, "domain name and passphrase."

He meant user id and ssh public key, but he doesn't know enough about Linux (which he supports for a living) to know what it was called.

Is anyone using a yubikey or any other hardware key device at work?
How is your experience when using it and what types of accounts are secured with it?