I have this little hobby project going on for a while now, and I thought it's worth sharing. Now at first blush this might seem like just another screenshot with neofetch.. but this thing has quite the story to tell. This laptop is no less than 17 years old.

So, a Compaq nx7010, a business laptop from 2004. It has had plenty of software and hardware mods alike. Let's start with the software.

It's running run-off-the-mill Debian 9, with a custom kernel. The reason why it's running that version of Debian is because of bugs in the network driver (ipw2200) in Debian 10, causing it to disconnect after a day or so. Less of an issue in Debian 9, and seemingly fixed by upgrading the kernel to a custom one. And the kernel is actually one of the things where you can save heaps of space when you do it yourself. The kernel package itself is 8.4MB for this one. The headers are 7.4MB. The stock kernels on the other hand (4.19 at downstream revisions 9, 10 and 13) took up a whole GB of space combined. That is how much I've been able to remove, even from headless systems. The stock kernels are incredibly bloated for what they are.

Other than that, most of the data storage is done through NFS over WiFi, which is actually faster than what is inside this laptop (a CF card which I will get to later).

Now let's talk hardware. And at age 17, you can imagine that it has seen quite a bit of maintenance there. The easiest mod is probably the flash mod. These old laptops use IDE for storage rather than SATA. Now the nice thing about IDE is that it actually lives on to this very day, in CF cards. The pinout is exactly the same. So you can use passive IDE-CF adapters and plug in a CF card. Easy!

The next thing I want to talk about is the battery. And um.. why that one is a bad idea to mod. Finding replacements for such old hardware.. good luck with that. So your other option is something called recelling, where you disassemble the battery and, well, replace the cells. The problem is that those battery packs are built like tanks and the disassembly will likely result in a broken battery housing (which you'll still need). Also the controllers inside those battery packs are either too smart or too stupid to play nicely with new cells. On that laptop at least, the new cells still had a perceived capacity of the old ones, while obviously the voltage on the cells themselves didn't change at all. The laptop thought the batteries were done for, despite still being chock full of juice. Then I tried to recalibrate them in the BIOS and fried the battery controller. Do not try to recell the battery, unless you have a spare already. The controllers and battery housings are complete and utter dogshit.

Next up is the display backlight. Originally this laptop used to use a CCFL backlight, which is a tiny tube that is driven at around 2000 volts. To its controller go either 7, 6, 4 or 3 wires, which are all related and I will get to. Signs of it dying are redshift, and eventually it going out until you close the lid and open it up again. The reason for it is that the voltage required to keep that CCFL "excited" rises over time, beyond what the controller can do.

So, 7-pin configuration is 2x VCC (12V), 2x enable (on or off), 1x adjust (analog brightness), and 2x ground. 6-pin gets rid of 1 enable line. Those are the configurations you'll find in CCFL. Then came LED lighting which required much less power to run. So the 4-pin configuration gets rid of a VCC and a ground line. And finally you have the 3-pin configuration which gets rid of the adjust line, and you can just short it to the enable line.

There are some other mods but I'm running out of characters. Why am I telling you all this? The reason is that this laptop doesn't feel any different to use than the ThinkPad x220 and IdeaPad Y700 I have on my desk (with 6c12t, 32G of RAM, ~1TB of SSDs and 2TB HDDs). A hefty setup compared to a very dated one, yet they feel the same. It can do web browsing, I can chat on Telegram with it, and I can do programming on it. So, if you're looking for a hobby project, maybe some kind of restrictions on your hardware to spark that creativity that makes code better, I can highly recommend it. I think I'm almost done with this project, and it was heaps of fun :D

TLDR: In defense of Powershell - the rant:

I don’t get the Powershell hate.

You don’t hate a screwdriver for not being able to turn a nut, you just *don’t use a screwdriver to turn a nut*

Once you recognize what the tool is good for and you don’t try to use it like Bash, it’s wildly powerful, and satisfying to use in a way Cmd.exe never was.

Cygwin or a Linux Subsystem can only go so far on a Windows computer. You’re dealing with two fundamentally different OS architectures. It makes sense you’d need different tools.

And like it or not, Microsoft owns the non-tech-user desktop , corners the non-tech server business market, and Active Directory is THE tool for managing Windows desktops on a large scale - So Wanblows is not going away anytime soon.

Automation without some weird ass sysVol batch login script is finally possible. Anyone who knows .Net classes can leverage their methods from directly within Powershell. Remote management of headless Windows servers is now a reality. If you have an Office 365 Exchange server you can literally Powershell remote to it for management, just like your favorite cloud hosted Linux distribution.

No one said Windows is a better OS, but an object based shell on an object based OS *makes sense*. It’s useful for its environment. Let it be.

So you remember this Headless duck that found it's way into debugging? Well after a few more adventures of 3D printing, it evolved. Afew parts that never would have seen the daylight were added to his body.

Say hello to: Lt. Duckfix

After a long wait of 8 months, C.H.I.P the 8$ headless computer finally arrived. And since I have already made something like a cheap hack of siri(I call it dyna and it lets me control my laptop with voice), I am going to automate the f*** out of my home!!!

Trying to figure out a way to make it a headless Ubuntu server!😅

If your JavaScript and css is not loading on your server, make sure your folder and files have the right permissions.

Two days of running around like a headless chicken because I'm retarded... 😫

So I got a couple of C.H.I.P. single-board computers a good while back because Raspberry Pi Zero was always out of stock.

I named them pringles, the smooth and synthetic one with a GUI, and ruffles, the sturdier and rugged one with a headless OS.

...They still lack a definitive purpose in life.

I'm a jr developer. I started off in automation testing and don't mind it but the testing codebase is cancer, doesn't follow basic Java conventions even basic naming conventions like camelcase, and the tests are super slow using hardcoded Thread.sleep(). Since the automation tests are not automated, I have to run manually. YES manually, every morning I wake up early at 7am to run the 2.5 hour long tests (7am because this before people get to work and when the application goes back online). I run this bitch and monitor them but most of them fail anyways. I also have to write a email report on the results which means I have to explain why shit is failing so I have to debug all this crap. This shit literally eats up an additional 2-3 hours of my work day everyday and the time is not even accounted for. ALSO, since it's running on my laptop, it makes my computer slow most of the day. If I have to debug, I can't have the browser be headless so fuckin chrome browsers be popping up every 2 minutes. I did this for legitimately 8 sprints until I decided enough was enough and bitched about it and the team told me I had no choice. I eventually got them to push towards automating it but it's still in progress so I'm still running this dumb shit. The contractors try to take advantage of me any way they can by giving me mindless bitch work they don't want and they know I don't usually say no since I'm a jr resource. I hate running the fucking automation tumor. Sometimes I go into the meeting rooms alone to scream.
I feel like I'm wasting my life away and not learning as much as I could somewhere else

Chrome, Firefox, and yes even you Opera, Falkon, Midori and Luakit. We need to talk, and all readers should grab a seat and prepare for some reality checks when their favorite web browsers are in this list.

I've tried literally all of them, in search for a lightweight (read: not ridiculously bloated) web browser. None of them fit the bill.

Yes Midori, you get a couple of bonus points for being the most lightweight. Luakit however.. as much as I like vim in my terminal, I do not want it in a graphical application. Not to mention that just like all the others you just use webkit2gtk, and therefore are just as bloated as all the others. Lightweight my ass! But programmable with Lua, woo! Not like Selenium, Chrome headless, ... does that for any browser. And that's it for the unique features as far as I'm concerned. One is slow, single-threaded and lightweight-ish (Midori) and another has vim keybindings in an application that shouldn't (Luakit).

Pretty much all of them use webkit2gtk as their engine, and pretty much all of them launch a separate process for each tab. People say this is more secure, but I have serious doubts about that. You're still running all these processes as the same user, and they all have full access to the X server they run under (this is also a criticism against user separation on a single X session in general). The only thing it protects against is a website crashing the browser, where only that tab and its process would go down. Which.. you know.. should a webpage even be able to do that?

But what annoys me the most is the sheer amount of memory that all of these take. With all due respect all of you browsers, I am not quite prepared to give 8 fucking gigabytes - half the memory in this whole box! - just for a dozen or so tabs. I shouldn't have to move my web browser to another lesser used 16GB box, just to prevent this one from going into fucking swap from a dozen tabs. And before someone has a go at the add-ons, there's 4 installed and that's it. None of them are even close to this complete and utter memory clusterfuck. It's the process separation. Each process consumes half a GB of memory, and there's around a dozen of them in a usual browsing session. THAT is the real problem. And I want to get rid of it.

Browsers are at their pinnacle of fucked up in my opinion, literally to the point where I'm seriously considering elinks. Being a sysadmin, I already live my daily life in terminals anyway. As such I also do have resources. But because of that I also associate every process with its cost to run it, in terms of resources required. Web browsers are easily at the top of the list.

I want to put 8GB into perspective. You can store nearly 2 entire DVD movies in that memory. However media players used to play them (such as SMPlayer) obviously don't do that. They use 60-80MB on average to play the whole movie. They also require far less processing power than YouTube in a web browser does, even when you download that exact same video with youtube-dl (either streamed within the media player or externally). That is what an application should be.

Let's talk a bit about these "complicated" websites as well. I hate to break it to you framework web devs, but you're a dime a dozen. The competition is high between web devs for that exact reason. And websites are not complicated. The document itself is plain old HTML, yes even if your framework converts to it in the background. That's the skeleton of your document, where I would draw a parallel with documents in office suites that are more or less written in XML. CSS.. oh yes, markup. Embolden that shit, yes please! And JavaScript.. oh yes, that pile of shit that's been designed in half a day, and has a framework called fucking isEven (which does exactly what it says on the tin, modulo 2 be damned). Fancy some macros in your text editor? Yes, same shit, different pile.

Imagine your text editor being as bloated as a web browser. Imagine it being prone to crashing tabs like a web browser. Imagine it being so ridiculously slow to get anything done in your productivity suite. But it's just the usual with web browsers, isn't it? Maybe Gopher wasn't such a bad idea after all... Oh and give me another update where I have to restart the browser when I commit the heinous act of opening another tab, just because you had to update your fucking CA certs again. Yes please!

I think I just blew my own mind here.

Look at this:

Class SomeClass
{
_call($functionName, $arguments)
{
return call_user_func(array('SomeClass','uselessMethod'), 'method');
}

method($foo)
{
return new Adapter($foo)->execute($this);
}

uselessMethod()
{
return $this->method(__FUNCTION__);

}

}
so __FUNCTION__ resolves to
Caller:

You can run that code, whether you comment out uselessMethod, or not.

Adapter is a function that looks for what class to call depending on a database value
and execute the call.

So api basically uses a chain call to do stuff like this in controllers, here's how
I call the above:

$someObject = (new Class($object))->uselessMethod()->doSomething()->doSomethingElse();

But like, eventually my code matured to where all those methods in the chain call have the same one line return that calls my adapter to find the logic to run.

So, basically, I can now have a class with headless function calls that calls a directory of other classes, that are all defined in a contract somewhere. So as long as those classes
all adhere to the contract, it will never return an error.

I can't think of any reason to do this, other than my setup, and I have a sneaky feeling,
as dirty as this trick is, that there's a bad reason my code has come to being able to do this.

Maybe wrong strategy pattern from the beginning?

I'm sure it'll come to me like 3 days from now..

I love my adhd kicks. My webstorm trial ended, I downloaded vscode, hated the bindings, I then used thr intellij extension. Everything ok expect autocomplete, not a fan of tab, couldn't use enter to enter enter as a binding. Hacked that binding.json, idk how i ended up installing a json sorter extension, ow theres a imports sorter. Okay what exactly i wanted to do? Right, do my niche site. Bad idea, i had written it in kotlin js, (missing intellij already) so i searched for almost non-scripting framework. Idk what happened...i ended up being interested in tailwind. Tried it a bit, ow they have tailwind ui. Thinking about buying the sweet shit. Ow i see headless UI... Pause, threw tailwind out. Thinking about react, met Solid, loved it, yarned and npmed it. Extension time, auto tag rename, more emmet like shit, rainbow and fira fonts, theme, scheme, ow colors whaaaw. Okay, its not gonna look like or feel like intellij, more like IDEA community if i had made the ide. What was i making again? Ah my webcrapp. still (idea)less... I went to codepen, grew a beard, came out, still feeling powerfully uncreative. Last stop: awwwards.. ow that awesome 7up nl site, imma see it, they nuked the animations, everything. This is where the rant actually ends, because THANK GOD I DONT FULLSTACK FOR A LIVING!!! Swift, Kotlin, XML and unpredictable Gradle is good enough for me to stop me from going wild. Stay safe. Genetic.🙋‍♂️

I'm on this fair and there are suits walking almost everywhere!

Even in the "Tech" area.

Like 'a-bit-to-confident' ducks with their heads up in the cloud exposing their throat while walking right into my sharp blade. Inexorable stumbling headless right over the edge of the next bridge, hitting the rails with their rubies. Helpless, waiting to get caught by the next hype-train.

*sigh*

The amount of time it took me to realise that SSH is disabled by default on raspbian.

Just took me a while to set up my first pi for headless use. Why? Because I'm small brain and added commas in the conf file like it was a JSON object.

Installed and set up the first vm on my headless Linux server, this is amazing!

Created a simple bot for an online game using puppeteer.

After an evening (and night) of dev and debugging (quite some rejected promise errors), it worked fine and was ready for a 10-minutely cron job.

Fixed a couple bugs in the first three hours. Then started playing minecraft, which lagged like hell.

Opened task manager and saw a list of about 25 headless chrome processes. They had not been closed because of unhandled errors before the close method call 😵

Now added some basic error handling ☺

I continue to internally read and study about Smalltalk in an effort to see where we might have FUCKED UP and went backwards in terms of software engineering since I do not believe that complex source code based languages are the solution.

So I have Pharo. Nothin to complex really, everything is an object, yet, you do have room for building DSL's inside of it over a simple object model with no issue, the system browser can be opened across multiple screens (morph windows inside of a smalltalk system) for which you can edit you code in composable blocks with no issues. Blocks being a particular part of the language (think Ruby in more modern features) give ample room for functional programming. Thus far we have FP and OO (the original mind you) styles out in the open for development.

Your main code can be executed and instantly ALTER the live environment of a program as it is running, if what you are trying to do is stupid it won't affect the live instance, live programming is ahead of its time, and impressive, considering how old Smalltalk is. GUI applications can be given headless (this is also old in terms of how this shit was first distributed) So I can go ahead and package the virtual machine with the entire application into a folder, and distribute it agains't an organization "but why!!!! that package is 80+ mbs!") yeah cuz it carries the entire virtual machine, but go ahead and give it to the Mac user, or the Linux user, it will run, natively once it is clicked.

Server side applications run in similar fashion to php, in terms of lifecycles of request and how session storage is handled, this to me is interesting, no additional runtimes, drop it on a server, configure it properly and off you go, but this is common on other languages so really not that much of a point.

BUT if over a network a user is using your application and you change it and send that change over the network then the the change is damn near instant and fault tolerant due to the nature of the language.

Honestly, I don't know what went wrong or why we are not bringing this shit to the masses, the language was built for fucking kids, it was the first "y'all too stupid to get it, so here is simple" engine and we still said "nah fuck it, unlimited file system based programs, horrible build engines and {}; all over the place"

I am now writing a large budget managing application in Pharo Smalltalk which I want to go ahead and put to test soon at my institution. I do not have any issues thus far, other than my documentation help is literally "read the source code of the package system" which is easy as shit since it is already included inside. My scripts are small, my class hierarchies cover on themselves AND testing is part of the system. I honestly see no faults other than "well....fuck you I like opening vim and editing 300000000 files"

And honestly that is fine, my questions are: why is a paradigm that fits procedural, functional and OBVIOUSLY OO while including an all encompassing IDE NOT more famous, SELECTION is fine and other languages are a better fit, but why is such environment not more famous?

DevOps is when the IT forces you to download Citrix on your Mac to login to a Windows VM where portable Putty is copied to the Desktop and the password login to your requested headless Ubuntu VM is in a text file on the mounted network drive.

Wrote a image generation api which uses a headless browser within 2 days ^^ it generates an image like the one below in around 500ms while also loading external resources like that avatar and the icons. ^^

My laptop charger is dead and my laptop can't work without it. So, basically I can't even look at code.

Colleague calls, says there is a problem with package.json and it requires my immediate attention as the APIs need to be deployed.

Me enters Sherlock mode, and remembers that I have a git hook which took a backup of my code every time I pushed and saved it on my headless tiny CHIP.

I get excited, and do an SSH from my phone, hoping to see the faulty code/file. But all I see is an outdated repository because I am an idiot who forgot to turn the fucking CHIP on after I shut it down for cleaning.

This is the most anti climatic ending I have been ever part of.

Warning long rambling story cause sleep deprivation

I never really bothered with ssh outside of using putty to remote into my servers and rpi's from my desktop to run updates, install something, or whatever else.

But today I was on a call with my cousin bored cause she was just rambling, so I opened vscode to clean my install of unnecessary extensions I installed and haven't used more than once or twice.

I saw Remote - SSH and as I was bored listening to a teenager complain about high school just like I used to (lol) and responding when she asked me something. I scrolled through the page, then the documentation just casually skimming the text

I setup an ssh key on an rpi I threw manjaro arm following the instructions on their tips and tricks page
I then moved the key to my desktop using winscp (cause lazy)
leading to having a minor hicup of rsa not being an accepted keytype (thanks 'your favorite search engine' for the help)
Finally, I was able to connect using the private key

at this point my cousin went to bed cause she has school tomorrow. But I was still doing stuff with ssh, I created a new ssh connection in VSCode, but had to go to the documentation to figure out how to make it use my fancy new key file, not hard took 30 seconds of looking to get it working.

Now that I was in, I moved to my development folder, created a folder for PiHole, created a compose yml, created a pihole-data folder.
I opened the yml and pasted in a compose from dockerhub.

at this point I thought 'i can't just run this from terminal can I'. and Obviously it worked cause there's literally no reason it wouldn't I'm just stupid to think it might not.

So I created folders and files on a remote system, launched a docker container, checked for package updates after on a linux machine. All from VS-Code on a windows machine.

I know this is simple for some people, i know some people are like 'where's the interesting part'. but ehhh I thought it was cool to get it setup, I now really regret not getting into ssh sooner, and I'm definitely going to uninstall vscode on all my smaller graphical VM's in favor of doing this. and this will definitely help with my headless vm's.

I also will have to thank my cousin, might not have done this if I wasn't stuck at my computer on messenger call with her lol

I'm gonna go to bed now, But I feel accomplished for the first time in a while even if it's for something so simple as setting up anssh key for the first time

This literally happened in my current team, and I'm not even an experienced dev yet.
Incident happened like this :
Our team is working on a RCP based on eclipse plugins, which has a headless mode and a GUI mode. Now, in the GUI mode, my manager cum architect thought there are no need of user log files (long story) because the user can see the info on screen, whereas in the headless mode, she wanted me to print the logs onto the console and a log file as well.
Now it just so happened that our team had got a recent addition as a replacement to our lead developer (she left the company) who claimed she had 3 years of expertise and a masters degree, and she was assigned a task. The task was to format a custom file we were generating out of the product (basically dumping info in a file) in a human-readable format. Miss new-addition-masters-degree decided it would be a very good idea to redirect the standard java output stream to a file output stream ( which she used for generating the formatted file ) but somehow never realized that she needed to reset the output stream back to standard output.
Consequences were devastating. I wrote the logic for the logger ( yes, apparently any available logging mechanism won't do it, again, long story ) and had it printing to a file in tmp directory. The logs seemed to be working fine initially but after a few logs, specifically from the point where the formatter started working, all the logs got printed in the formatted file. And this file was supposed to be used by our clients to develop something on top of it. Naturally, I got the heat of it and then naturally, worried and nervous and curious and in a frenzied state of mind, I started debugging.
When I got to the actual fault, I seriously could not decide whether to cry or laugh or call up miss masters and scream at her. I decided to ask her about what the hell she had written and her answer was most of it was written by the developer she replaced, so she didn't know it would cause this much problem. Anyway, I fixed the leak after that and averted the catastrophe.
And that, fellow devs, is the story of how I solved a crisis in my first year at corporate.

!rant

Today was a good day. I finally managed to wire up the entire backend system for my portfolio using headless Drupal 8, Node and React. And it happend after work!

Took me a week, and I'm new to the techniques. :D

Well, today I felt like the witch from the sleeping hollow movie.

I was working on a code that logins to a page and download files to a folder, according to the user.

Well, I tried to use the webservices from the page (like it should be) but the links were broken, and I lost a entire working day on trying the API 😮

The second day I tried with Selenium. Everything was going ok, but I wanted to run it without opening the browser and I found a “Headless Chrome”. At the end of the day, I found several blogs saying that Headless Chrome can’t download files 😱 second working day lost

Today I read about “PhantomJS”. I tried the code in C# with OpenQA.Selenium.PhantomJS BUUUUUUT it was missing 😡 I also tried with Python, but I had the same problem.

Finally, I found a blog with a solution for C# with Headless Chrome 😄

It's not every day that the solution to a long-standing mild frustration with a server is to blacklist the kernel module for video drivers.

5 years of never having an accessible console on that box was not the "headless" I had in mind all this time. I was finally able to solve the black screen by forcefully ignoring Intel's broken video drivers. Thanks Intel.

My top 3 open source projects are :
KDE ❤️❤️❤️❤️
Libinput gestures (allows you to do custom actions with your touchpad)
Strapi (Wich is a nodejs headless cms that gets the job done very quickly I haven't tested it in prod tho)

Changed the .bashrc of my headless server incorrectly, causing me to get kicked out of my ssh session as soon as I connected… Thank God for scp (learned something new today as well 😂)

your favorite headless cms?

Startup needs app done for MVP at a money fair. Startup finds good team. Startup plans every little thing written and has most of the app screens ready. Team signs NDA to see screens and docs. Startup keeps working on docs. Startup postpones dev start to after the fair! Thank you for wasting team's time! FUCK YOU STARTUP! BTW, that's a great app you have there... on 'paper', though it is just useless piece of crap. Great job you headless fucks!

There were two of them, not sure which was completed first. One was malware, the second one -- admin tool.

These were the early XP days

1. A batch [windows] script to ease system users' mgmt. Nothing fancy, just multiple calls to usercontrol. My dad needed it for work, and there, it was born. To extend further I made it into an exe file w/ some icon. I felt very proud of it :)

2. I have already told a story of this one at dR. Anyway, it was also a batch script. Except that it was more advanced. Basicaly it was a trojan. Once executed it discovered all that computer's ip addresses and uploaded them to an ftp. Then - pulled a headless radmin installation and initiated a silent install of radmin server. Added radmin server's executable to autolaunch list so that it would come up after reboots. Once done - uploaded SUCCESS status to my ftp. And then all I had left to do - pick an ip from my ftp and enter it into radmin client's CONNECT window. I had a full controll of over a dozen of pcs

Need some advice here.

So hello everyone! I recently moved abroad for work, for the sake of the experience and the excitement of learning how developers in Latin America tackle specific problems. To my surprise, the dev team is actually composed solely of Europeans and Americans.

I work for a relatively new startup with an ambitious goal. I love the drive everyone has, but my major gripe is with my team lead. He's adverse to any change, and any and all proposals made to improve quality of throughput are shot down in flames. Our stack is a horrendous mess patched together with band-aids, nothing is documented, there are NO unit tests for our backend and the same goes for our frontend. The team has been working on a database/application migration for about a month now, which I find ridiculous because the entire situation could have been avoided by following very rudimentary DevOps practices (which I'm shunned for mentioning). I should also add that for whatever reason containerization and microservices are also taboo, which I find hillarious because of our currently convoluted setup with elastic beanstalk and the the constant complaints between our development environment and production environments differing too much.

I've been tasked with managing a Wordpress site for the past 3 weeks, hardly what I would consider exciting. I've written 6 pages in the past two weeks so our marketing team can move off of squarespace to save some money and allow us more control. Due to the shit show that is our "custom theme" I had to write these pages in a manner that completely disregard existing style rules by disabling them entirely on these pages. Now, ironically they would like to change the blog's base theme but this would invertedly cause other pages created before I arrived to simply not work, which means I would have to rewrite them.

Before I took the role of writing an entire theme from scratch and updating these existing pages to work adequately, I proposed moving to a headless wordpress setup. In which case we could share assets in a much more streamline manner between our application and wordpress site and unify our styles. I was shot down almost immediately. Due to a grave misunderstanding of how wordpress works, no one else on the team seems to understand just how easy it is to fetch data from wordpress's api.

In any event, I also had a tech meeting today with developers from partner companies and realized no one knew what the fuck they were talking about. The greater majority of these self proclaimed senior developers are actually considered junior developers in the United States. I actually recoiled at the thought that I may have made a great mistake leaving the United States to look a great tech gig.

I mean no disrespect to Latin America, or any European countries, I've met some really incredible developers from Russia, the Ukraine, Italy, etc. in the past and I'm certainly not trying to make any blanket statements. I just want to know what everyone thinks, if I should maybe move back to the states and header over to the bay/NY. I'm from the greater Boston area, where some really great stuff is going on but I guess I also wanted a change of scenery.

Recep Tayyip Erdogan had a problem — after his army service, he got so used to cold that he could only sleep on a raw, cold metal grill. Usually, normal people put mattress on top, but Erdogan didn’t feel right this way. So, in one of his personal prisons, he established a social project for making a full metal bed for himself.

For starters, to calculate the shape, he took the smallest man ever (3 inches high) with his fingers and sunk him into molten plastic. “What are you doing?! It hurts!” — man screamed. “Shut up. You’re on an important mission. Your motherland won’t forget you.”
After three months, the bed was ready. It was more of the same — metal bars, but this time with some kind of structure built of metal hinges, rebar and strong springs. This was the day — this was the big reveal event. It took place in the same prison — three prisoners were ready to lay on their new full metal beds, while news crews congratulated Erdogan and celebrated his greatness. “Well, it is time!” — he said.
Prisoners laid flat. An awful screeching sound. Prisoner number two is bleeding out. The spring mechanism broke out and impaled his chest onto a large metal bar. He’s not breathing.
“Shut it down. Shut it all down. No more cameras, no more news”, — said Erdogan.
“Yes, our master”, — said news crews.

They wanted to draft me to Afghanistan.
“No!”, — a young officer shouted, misgendering me — “He doesn’t know the stages of pain. Useless.”
“Are you perhaps arguing pain with a bipolar patient?” — I replied.
“You are a rave. Nothing but a rave.”

Raves spawned near your doors at night. Sometimes, they even spawned on the inside. I can’t say you were in danger, but it certainly wasn’t a pleasant thing to happen to anyone. They looked ugly. They dressed weird. They spoke in riddles.
“How do I move to Europe?”, — a rave asked.
“I…”
“Shut up!”
Rave took a door, suspiciously painted over and over multiple times, and started to slam my door with it, using it as a ram.
My door started giving in.

Alarm system.
On a separate note, to disable the alarm system, you have to speedrun Stanley Parable. It’s the hardest speedrun ever, specifically its hidden ending. It disables all alarm systems in three-mile radius IRL. No one knows how it works, but it does. Back to the danger zone!

“The better quality time you spend sitting on your toilet, the more you’ll live.”, — an officer said.
“I once had a girl blow me while I was shitting,” — Matthias replied — “You have nothing on me.”
“Fair enough!”

It is a little known fact, but the liquid that Northern cities use to clean up snow isn’t quite what it seems like. It’s not salt — in reality, there are bases on Mars, and they store pink goo that… “iMpRoVeS” dead bodies. The liquid is biological in nature, and it expires. Expired liquid is recycled as snow melter. You learn that in high school, but now, living on a train, you should know that there are special learning rooms here, in every. single. carriage. The small gym ball with two handles on its sides is called Gandhi ball. Fun fact: if you wear headless Segways on top of your shoes, and then lay flat holding a Gandhi ball, you can reach the speed of 270 kph!

Today’s news: a Reddit moderator and a legless woman gave birth to a living sex toy for their domestic boar.

Me: I need a new website. Let's make it with NodeJS / AdonisJS so I get a grip on that tech.

Also me: mmh, how about I use it as an API so that I can plug some other things in it?

Also me: successfully develop a headless CMS based on an API, with AdonisJS. Not perfect, but runs like a charm.

Best shell (bash) utilities to install? Looking to pimp up my headless server. So far I have tree (path visualizer), tmux, and nnn (disk space tool)

Optimizing my RESTful API plugin, used in a CMS to make it headless, was extremely satisfying.
Thanks to caching and alorithm improvements, I brought the response times down by a factor of 150.
The caching also includes dependency tags thus it will automatically invalidate on changes in the dependent element.

Interview: looked like I'm gonna use headless cms and jamstack ecosystem

Actual job: xml server with pike for the backend. Frontend served serverside + vuejs so good luck doing anything reactive without refreshing the page

After complaining I got to work on my tech stack but no signs of jamstack/headless. Even worse experience!

My first raspberry pi (zero W) came today and forgot to order OTG cables.

Looks like this thing is going headless.

Me before having to implement a bit more advanced content structure for the client: There are so many headless CMSes out there

Me after: Why the fuck are there no healdess CMSes whatsoever?

Uploading an xslx file to office365 to download it as an ods file only to be able to convert it to a csv file via libre office.

Direct conversion attempts with other tools would either fail converting the xslx file or break cells' values (ssconvert, soffice --headless -c, gnumeric).

One of those things where I fail to understand why it has to be so complicated.

How to View Writing Documentation as a Developer

You finally have the time to sit back and tell the world (or your team) the amazing system you built over the last month and how use it to save everyone's asses a whole lot of time.

... While watching everyone else running around like headless chickens.

... But then again you've been heads down coding for the last month...

do you experience deviation between headless chrome vs full chrome testing?

How do you plan before small software changes?

I have some extremely iterative approach where I change one function or one variable at a time, like a headless chicken. I am not planning beforehand which modules or functions I need to change but start from somewhere and like a linked list, I am moving on until the end.

But I feel like it is wasting my time. What is your approach when you want to have let's say -50 line of code changes?

Monday AM. Instead of building images in the backend i'll just make them in HTML and use a headless browser to screenshot them ! Sweet. Doable in a day and saves the rest of my week !

Friday afternoon. Crashes, browser failure, zombie processes, intermittent failure, docker failure with headless browser. Still not working well.

Why am I such a dumb fuck ?

Holy shit. I've been working on a project for the last few months. It's been going fairly well all things considered. We're currently at the tail-end of the project and are set to be dev complete next Friday.

We're on a headless CMS + Gatsby and decided to use a front-end framework (This is important to the story) to "speed development time."

PM comes to me yesterday and inquires about functional/visual QA on IE11. IE-What?! This framework I was told I had to use doesn't support IE11.. like.. at all, and now we need to support IE11, at the ass-end of this project, cause 60% of the traffic on their current site uses IE11? Oh come on!

So its looking like we get to re-write a few components from scratch. Then we get to try and fix the display issues for the other ones... FML, I was looking forward to being done with this so I could take a week off and go recharge before Thanksgiving garbage.

I'm genuinely contemplating changing my career to an IT support role from my current web dev endeavors.

I have become rather disinterested for quite some time with web development, I've been working with React, Angular, the regular Wordpress stuff with the theme building/modifying, headless instances, plugin development and whatnot and all of these have become more of a chore than anything else.

I'm leaning towards an IT support role as I genuinely have more interest in a user support/infrastructure support role than a developer role, the question is, is it doable ?. I know my way around Windows and Linux Servers, know LDAP, Active Directory, BASH, Powershell, Networking, can do cabling and whatnot but I don't have the experience to show off those.

Any tips would be greatly appreciated

Fuuuuuuuck!!
CR estimates:
Part 1: 2h including testing
Part 2: 2h-2days-maybe never (small changes on horrifically fucked up project noone understands with tons of tech debt)

Managed to pull off the part two in one day.. //yay me?!

Additional day to unfuckup git fuckups (including but not limited to master head not compiling because a smartass included *.cs in .gitignore file which he also pushed..don't ask, I have no clue why..) which was a huuuge deal for me as I usually use only local repo and had no idea how to tackle this.. coworker helped out.. seems I was on the right way, but git push branchy was acting up & said I had to login & ofc I had no clue what the pass was set to (first setup was more than 2yrs ago)..so new key, new pass.. all good.. yay!

Back to the original story/rant: Now I'm stuck with writing jira explanation why it was done this way & not the way customer suggested. They offered only vague description anyways which would require me to do a hacky messy thing, ew.. + it most probably would require major data modifications after deployment to even make it work..

Anyhow, this expanation is also easy peasy in english..
BUT...
I must write it in my native tongue.. o.O FML! Spent almost 40mins on one paragraph..

Sooo.. if anyone will petition to ban non english in IT, I'm all for it!!

Thanks to one of my colleagues, I have learned that there is a git command that convert HEADless piece of tree into a branch. Thank you git switch. Also, thank you colleague.

Alright! I'm starting to like DietPI.

I liked Raspbian before, but setting up a headless system really was a PITA.

And with DietPI... it seems as if it was made for headless setups.

Finally, I'll have my proxy hub.

"wow, this headless looks pretty cool"

5 minutes of reading further:
"The codebase is written primarily in PHP"

Ah, yes.
So, what is you r favourite headless CMS out there?

How I feel about people in a meeting

Listening to someone others participating in some meeting (on speaker) (I'm not a part of):
checking configurations, talking about config hierarchies, addressing network stack limitations, etc -- all smart-sounding things. They must be very wise and experienced. It's got to be something very serious they're working on

Participating in a meeting myself:
wtf is he talking about, does he even know what JVM is? No no, this configuration does not make ANY sense. No, Mr manager, this is not how it works. Come on guys, you all running like a headless chicken - USE COMMON SENSE!!

I wonder if anyone else noticed that... I've been noticing this since the very beginning of my IT career.

Spending all day trying to install cockpit cms.

- bad permission.

*insert here all of swear-word you know"

We had a bug with our Karma test (JavaScript unit tests). The headless Chromium crashed after test 272 or 273, every time since a week. I fixed it, but I even don’t now, we Chromium crashed 🤷🏼‍♂️

Have you tried an open-source headless CMS? Any recommendations? (No WordPress allowed)

How do you guys monitor programs on your servers?

For example, I have a raspberry pi zero w running raspbian (headless). On this pi, I have a bunch of discord bots and web scrapers running at the same time. My solution was to run them all from a bash file:

Python3 discordbot1.py &
Python3 discordbot2.py &
Python3 webscraper1.py &
Node webscraper2.js & etc.

Is there a better way I could be running these services? How is stuff like this usually done?

Creating the build script for the CI pipeline:

- 20% trying to avoid someone getting access to passwords, tokens, etc.
- 10% writing commands for the build and tests
- 70% writing work arounds for bugs and errors caused by the CI system or SDKs in headless environments...

Iterating over 50 rows of data with selenium takes 8-10 seconds according to System.currentTimeMillis() But opening the site itself takes 65-70 seconds by itself. Why is this site so damn slow even opening it normally it’s slow as fuck and headless mode doesn’t help much if at all

Doesn’t matter much since I can just sit and let it do it’s 4000 iterations but I really ducking hate that 60 seconds just to load the damn page

So I’m bit desperate for headless chrome documentation. Went to SO. Was about to ask yes I was about to do tough step. Ask a question.
I clicked blah blah, searched topic: Headless chrome documentation. Nothing previous was there.
So I clicked to proceed to write a question.
And then I asked myself do I really want to put dirt on myself now?
I freakin left and I’m asking our colleague that worked at google, and also I’m going to rather ask directly google for official docs since there is nothing only blogs...

Every day is tempting to me..tempting to use some solutions i am not sure that i can handle it.

The Company i work for has an external IT Partner that does all the heavy lifting when it comes to our infrastructure, like installing servers, doing the installations and such. I mostly monitor it and do basic maintenance. Its all windows.

Recently i thought about adding a fifth Hyper V instance for an intranet webserver...based on some linux distro (probably ubuntu cause that is what i am familiar with). But i am not THAT familiar with ubuntu or any linux distro..buts its just the intranet and i already installed nginx and apache with success, what could go wrong?

today i sketched some intranet websoftware our production might find useful to collect data input from our workers (we are somewhat small so there is no big ERP software as of now). When thinking how to realize the data input i thought that maybe a basic raspberry and some cheap 1280x800 10.1 inch touch panels would be best..its very tempting, but on the other hand i am not sure i am ready for that, my experience is shallow and only based on my own RaPi that i 99,99% run headless. On the other hand it would be a very small and space safing concept..and cheap..compared to the use of Laptops (the go to company solution when computers are needed).

It also had the risk that i am the only one that could unfuck anything if things go south..it also has the advantage that i am the only one who could fix things when it goes south...

so much temptation

Can someone teach me proper use of chrome headless with selenium?

My wife is buying a small business. They have a website that I'm going to have to take over, and I have a feeling I'm going to want to redo it (it's not terrible looking, but I'm pretty sure it's WP, so just no thank you).

Was just wondering if anybody had any reccomendations for a cheap/free headless CMS?

Saw Ghost for $25/month but it has "user" limitations (as in, seemingly, limits to your site traffic). I'm just basically looking for cheap image/blog hosting queryable from a REST/GQL API. I'm considering just making a simple frontend for my wife to write markdown blogs up to S3 or something if there's no cheaper option.

This is the second company I've joined where someone has chosen contentful instead of just using one of the many other coherent headless cms.

Why does all the data look like shit? Why am I being forced to use their shitty js lib. I want an endpoint through rtkquery damn it like the rest of the app.

Contentful can burn in hell.

Headless Drupal...why bother.

I hope I never again have the misfortune of having to get projects for Eclipse-based IDEs building in an automated headless way.

Ok, long shot here. I'm doing a POC using a headless browser (Seleium/PhantomJS (C#)) and it is kicking my tail. Sometimes things work and then they don't. My login code is something like:

private IWebDriver _driver = new PhantomJSDriver();
_driver.Navigate().GoToUrl(LoginURL);
_driver.FindElement(By.Name("txtUser")).SendKeys(UserName);
_driver.FindElement(By.Name("txtPass")).SendKeys(Password);
_driver.FindElement(By.TagName("button")).Click();

and it doesn't find it even though it in in _driver.PageSource.

All the SO stuff is from 2013 and I’ve tried many, many, four days worth of many By.XPath, By.Id, By.Name combinations and it just doesn’t work.

Need recommendations for CMS compatible with c# and .net core. Headless CMS are fine too

Thanks

(sort of rant but not totally)

so I am using Directus for headless cms and I'm always looking around for other options such as Contentful, but the problem with Contentful is that it is hella expensive in my opinion (249$/month at least after you exceed the free tier with limited capabilities)

So the real question is, do you guys know of any other Headless CMS?

Should I switch to Chrome Headless/Puppeteer for webpage header+footer scraping or stick with Express+Cheerio?