Looking for a job as a deveoper be like:

Job title: car driver

Job requirements: professional skills in driving normal- and heavy-freight cars, buses and trucks, trolley buses, trams, subways, tractors, shovel diggers, contemporary light and heavy tanks currently in use by NATO countries.

Skills in rally and extreme driving are obligatory!
Formula-1 driving experience is a plus.

Knowledge and experience in repairing of piston and rotor/Wankel engines, automatic and manual transmissions, ignition systems, board computer, ABS, ABD, GPS and car-audio systems by world-known manufacturers - obligatory!

Experience with car-painting and tinsmith tasks is a plus.

The applicants must have certificates by BMW, General Motors and Bosch, but not older than two years.

Compensation: $15-$20/hour, depends on the interview result.

Education requirements: Bachelor's Degree of Engineering.

Me: so, ifconfig, what is my gateway?

ifconfig: [ip address]

Me: nmap, what is this IP address?

nmap: it's a network switch with an open telnet port.

Me: what happens if I connect to it?

switch: WHAT IS THE PASSWORD?!?!

Me: is it blank?

switch: correct. what do you want to do?

Me: can I look at all the IP and MAC addresses on the network?

switch: WHAT IS THE ADMIN PASSWORD?!?!

Me: is it... admin?

switch: correct. Here's everyone that's connected to the network: [400+ IPs and MACs]

Me: ok python, would you filter through these and tell me what manufacturer each one belongs to?

python: sure.
[~50 manufacturer lookups later]
python: there's a bunch of apple product, a bunch of miscellaneous laptop and printer manufacturers, and some raspberry pis.

Me: raspberry pis?

python: yep. about 20 of them.

Me: What happens if I connect to one?

rpi: WHAT IS THE PASSWORD?!?!

Me: raspberry?

rpi: correct. what do you want to do?

Me: can I make you do my bidding in the background when you aren't being used?

rpi: sure, sounds fine.

I love ignorant sysadmins.

Long rant ahead. Should take about 2-3 minutes to read. So feel free to refill your cup of coffee and take a seat :)

It turns out that the battery in my new Nexus 6P is almost dead. Well not that I didn't expect that, the seller even explicitly put that in the product page. But it got me thinking.. why? Lithium batteries are often good for some 10k charges, meaning that they could last almost 30 years when charged every day! They'd outlive an entire generation of people!

Then I took a look at the USB-C wall charger that Huawei delivered with this thing. A 5V 3A brick. When I saw that, I immediately realized.. aah, that's why this battery crapped out after a mere 2 years.

See, while batteries are often advertised as capable of several amps (like 7A with my LiitoKala 18650 batteries that I often use in projects), that's only the current that they can safely take or deliver without blowing up. The manufacturer doesn't make this current rating with longevity in mind. It's the absolute maximum in current that a given battery can safely handle.

The longevity on the other hand directly depends on the demand that's placed on the battery. 500mA which is standard USB 2.0 rating or 1A which is standard USB 3.0 rating, no sweat. The battery will live for at least a decade of daily charges and discharges like that no problem.

But when you start shoving 3A continuous into a battery, that's when it will suffer. Imagine that your current workload is 500mA and suddenly you get shoved 6 times that work upon you. How long would you last?

Oh and not only the current is a problem, I suspect that it also overvolts the battery to maintain a constant current all the way till the end. When I charged my lithium cells with my lab bench power supply, the battery would only take a few milliamps when it got close to the supply voltage. Quick bit of knowledge: lithium cells are charged at constant current first, then when the current drops below that, it continues at constant voltage - usually 4.2 or 4.35V depending on the battery. So you'd set your lab bench power supply at 4.2V 500mA. But in that constant voltage mode, as the battery's voltage and the supply's voltage equalize, the current drops because the voltage difference becomes lower. Remember, voltage is what causes current to flow. Overvolting at the supply to stay in constant current mode all the way till the end speeds this process up but can be dangerous and requires constant monitoring of the battery voltage.

So, why does Huawei and a bunch of other manufacturers make these 3A power chargers? Well first it's because consumer demands ever more, regardless of the fact that they can just charge at 500mA for the night (8h of sleep) and charge a 4000mAh battery from 0 to 100% no problem. Secondly it's because sometimes you need that little bit of extra juice fast, like when you forgot to plug the damn thing in and you've got only 30 minutes in the morning to pour some charge into it.

But people use those damn fucking things even when they go to bed, making that 3A torture a fucking standard process!! And then they complain that their batteries go to shit?!

Hopefully this now made you realize that the fast charger shouldn't be used as a regular charger ^^

I'm just waiting for the day when manufacturers will consider linux as an operating system and start giving support for linux drivers.

Oh my word, shut up everyone about the ESC key. In interface design do you keep something around that 1% of your user base uses, or do you make something better? It's not even gone. It's on the touch bar for fricks sake.

And while we're talking about it, stop calling Apple so innovative. Innovation at Apple died with Steve Jobs. "We developed this awesome new iPad Pro!" it's just a bigger iPad with the same stupid limitations of all iPads. If you want a real portable work tablet, go buy a Surface. "We added a touch bar to the MacBook Pro!" some manufacturers of Windows laptops have had that thing for years!

😰

Ok, I get it, stickers are "cool". However, every time I see a laptop full of them I can't help but think three things.

1) Why on earth would your ruin a perfectly nice, clean, design.
2) I see the stickers and think "wow, (s)he must really be a fan of a lot of tech companies
3) I think your were one of those kids in school that glued stickers of skateboard apparel manufacturers to your backpack because it was the "cool" thing to do.

But mainly the ruined design thing bothers me. Just..... WHY!?!

"Thank you for choosing Microsoft!"

No Microsoft, I really didn't choose you. This crappy hardware made you the inevitable, not a choice.

And like hell do I want to run your crappy shit OS. I tried to reset my PC, got all my programs removed (because that's obviously where the errors are, not the OS, right? Certified motherfuckers). Yet the shit still didn't get resolved even after a reset. Installing Windows freshly again, because "I chose this".

Give me a break, Microshaft. If it wasn't for your crappy OS, I would've gone to sleep hours ago. Yet me disabling your shitty telemetry brought this shit upon me, by disabling me to get Insider updates just because I added a registry key and disabled a service. Just how much are you going to force data collection out of your "nothing to hide, nothing to fear" users, Microsoft?

Honestly, at this point I think that Microsoft under Ballmer might've been better. Because while Linux was apparently cancer back then, at least this shitty data collection for "a free OS" wasn't yet a thing back then.

My mother still runs Vista, an OS that has since a few months ago reached EOL. Last time she visited me I recommended her to switch to Windows 7, because it looks the same but is better in terms of performance and is still supported. She refused, because it might damage her configurations. Granted, that's probably full of malware but at this point I'm glad she did.

Even Windows 7 has telemetry forcibly enabled at this point. Vista may be unsupported, but at least it didn't fall victim to the current status quo - data mining on every Microshaft OS that's still supported.

Microsoft may have been shady ever since they pursued manufacturers into defaulting to their OS, and GPU manufacturers will probably also have been lobbied into supporting Windows exclusively. But this data mining shit? Not even the Ballmer era was as horrible as this. My mother may not realize it, but she unknowingly avoided it.

Around 27 hours at new customer location.

They had a server failure due to incompetence.

They had fired their own IT guy and called us 6 months later because the server stopped responding.

First diagnostic. 2 drives are dead in a raid 5 with one hot spare. Raid controller then proved to be broken once the disks was replaced.

Waiting for new raid controller and installing.

Backup non existing, no one changed dat tape during the 6 months without IT. The tape was just a transparent plastic band, no media left.

Raid config is stored in static ram on controller, no backup!

Several hours in tech support to find out how to rebuild raid config from existing disks.

Proves to be impossible to rebuild raid set due to some checksum failures.

More hours with support to enable some diagnostic read only mode to mirror low level content to external drive.

Then many more hours to copy parts of the tree until it gets an error, restart after that and go on.

In the end we got around 70% back.

During this time I manage to be in contact with the raid manufacturers all support centers, one in europe, one in the us and one in Taiwan, switching each time one if them closed for the night.

The customer later declined a steady support contract due to us being to expensive ;)

Some just don’t want to learn.

Call me old-fashioned, but... I kinda liked it back in the day, when Microsoft made proprietary software, the Community made free software and everyone's "cui bono" was quite easy to answer - even those corporations involved in FLOSS did have a clear way to finance themselves.

Now, we have Microsoft coming into open source, seemingly making projects better and offering more and more "free" stuff.

You know.

"Free" Windows 10.
"Free" SaaS Office.
"Free" "Private" Repos on Github.

In general - what happened to clear and concise "I give you money, you give me stuff" capitalism like we had it in the 2000s?

I'd rather pay 20 bucks for a game on Steam than get it "free" and with ads or microtransactions - yet, many games, especially mobile, don't even offer me that option. It wouldn't be that hard now, would it?

The same goes for software. That Canonical would need to fuck their users over after Ubuntu One went to shit was obvious - they didn't offer the kind of commercial/enterprise OS'es that Redhat or SuSE sell.

What people seem to forget is that everyone needs to make a profit somehow. You don't get "free" stuff. Even the volunteers in the Open Source Community get something out of it - an opportunity to pad their CV at least, if nothing else.

Nowadays, software manufacturers have the same legitimacy as the "free" financial "advisors" you find at banks - and who could be dumb enough to trust them? Oh yeah: Almost the entire fucking society is who.

But then again, sell something and noone will want it - because they all want it for free, with annoying, privacy-invading ads or with equally annoying microtransactions, or financing based on commission - so you don't only pay ONCE, you pay until you realize you got fucked over and quit.

Capitalism used to work until all those idiots stepped in. How the fuck don't people realize that there's no free lunch in life? When have we stopped being functional people and turned into idiots.

Even worse: Those idiots think that they're entitled to something! They, who volunteered to become merchandise instead of customers, think that they have rights! Do cattle have rights? Nope. They get their "free" hay everyday and I get to buy beef, that's how it works. Moo!

Hell, they are surprised when they get fucked over by bank salespeople or their data stolen by corporations, intelligence agencies or something... What did they expect, goodwill?

Can we please make Adam Smith mandatory reading in school?! I mean, give people a chance to understand capitalism? The nonexistent "goodwill" of traders in general?

Dear Phone Manufacturers,
I dont like that you always make phones slimmer and slimmer, batteries suffer and the cooling of the SoC isnt really improving either...
Also your phones are getting more breakable than ever!

JUST MAKE PHONES THICKER FOR GODS SAKE! THEN WE CAN HAVE BATTERIES WHICH LAST FOR DAYS AND PHONES THAT ARE INDESTRUCTABLE! thanks. and now Fuck off

Apple took a major step
3 party manufacturers created a hype and addressed this step as a problem
Then make products to solve the pseudo problems
Smart business idea 😂😂😂
Lol😂😂

WHAT THE HELL??

It's been over TWO WEEKS now and my Arch sticker pack still has NOT arrived!!!

I'm really starting to get mad now.

Unlike the stickers, my brand new laptop has arrived. But as you might have guessed, it's completely useless at the moment.

Like, what's even the point of having a laptop with Arch, when you can't show everyone else you're using Arch? So humiliating, can't even go in public now with that laptop.

People in the cafeteria will look at the back of my laptop without knowing I'm using Arch. The shame... Almost inhuman.

My only option is to go to speak to everyone individually to tell them I'm using Arch.
However, that might be risky. Imagine if I would miss someone!? They would leave without knowing I was using Arch.

In fact, I might not even meet them EVER AGAIN! In that case they would NEVER know I was on Arch! OMG! TOO MUCH HORROR!!!

All this because of a shity manufacturer.
Manufacturers like this really piss me off.
Because YOU can NOT ship on time I have to WASTE precious time now, THANKS A LOT China Stickers Corporation.

Fuck stripped screws. A big FUCK to all those manufacturers using fucking cheap screws. Fuck them all.
Now, I am stuck here. Don't have the equipment to remove this motherfucker.

How Google loost its data Monopoly-

Present:
Step 1- US bans Huawei

Step 2- Google Bans Huawei

Step 3- China Gov helps Huawei get back on its feet

Future:
Step 4- Huawei makes their own OS to rival Google, the OS can run Android apps as well as IoS apps and has its own language/framework for developing new apps

Step 5- China bans Google from their market

Step 6- Chinese mobile manufacturers adopt the new OS

Step 7- China's population starts using the new OS i.e. country with the world's largest population starts using the new OS

Step 8- Chinese manufacturers like Xiaomi, Vivo, Oppo and OnePlus who already own approx 40% of India's smartphone market start distributing the new OS based phones in India. Factors like cheaper devices take this market share to 50%+

Step 9- Cry, cause the new OS is now being used by approximately 30% of the world's population.

Yeah, bring your hate in the comments but come back and talk to me in August 2022...

Dear manufacturers..

Can we stop releasing special edition products and calling them 'Founders Edition'... How do you get the 'Founder' part?

Primary example are Google and NVIDIA, massive companies with enough money to do whatever they wanted and selling a controller or graphics card as 'Founder' is just bullshit, we aren't founding anything, its already there so just call it what it is, a slightly 'Pretty Edition' and call it a day .-.

So I just received this second DSP5005 DC-DC programmable power supply. Time to make an enclosure for the thing!! 3 power supplies totaling at around 1kW, and 2 variables connected to the 50V 10A one, through external banana wires (I want all of this to be modular). No biggie, take measurements for the AC-DC supplies, add in the variables on the front, and cut it out.

So, I went and did just that. Now my 500W (50V 10A) supply is a bit larger than the others, and it's got a fan. So I figured, well then probably my 24V 8.3A (200W) and 12V 15A (180W) supplies could use some cooling as well. But how am I going to achieve passive cooling without a spacing between the supplies?! So I thought of some spacer design. It had to be out of wood, and I had some 4mm MDF and some IKEA parts around. So, 4mm MDF for the plate and 8mm wood spacers from IKEA for the spacing. And some super glue to hold it all together.

Weighing my power supplies against a 1l bottle of milk, it seems like my power supplies are ~500g. Great, so the top spacer would take 500g and the bottom one 1kg + the weight of the top spacer.

I ended up building one plate with 6 spacers in it yesterday, until I got too tired. Then I placed my entire weight against it, 20kg at least. It didn't budge. Pretty good for something that's only designed to withstand a 1kg load!!

So, I made something good with only a 10x18cm piece of MDF, some garbage from IKEA, and most importantly a bit of a brain. Something that can handle 20x its designed load no problem. Manufacturers, is it really right to produce shit when I can beat your manufacturing processes big time without an assembly line?!

Dear Laptop manufacturers,
Why the FUCK would you place the power button where the 'Delete' should be? Just so that you accidentally can turn off your pc while typing? Fuck you.

If anyone know a good laptop that is thin and light, 14" and has the power button outside of the keyboard area, please tell me.

I hate buying new laptops. HATE IT. The manufacturers are always trying to do something that makes it more complicated to buy a laptop confidently.

Why not name all of the laptops with numbers? Make them really hard to differentiate. Then offer the same model number across multiple years so it is difficult to determine which year the laptop is from.

Oh. And let’s make sure every laptop has a major flaw in the form factor.

Let’a add a numpad that squishes the keyboard to the left in a weird way. Lets do something to the trackpad to make it awkward to use. Maybe the keyboard should have a weird configuration. Maybe we can put 4 spare characters of various colours on the symbol key caps. How about a battery only lasts a few hours. May we add specialized hardware so you are stuck with windows. Maybe we can make it super thick and heavy. Lets have a screen with terrible viewing angles. Since this laptop has no major flaws we should overprice it. No repairs or upgrades on this one because we filled the computer with glue. Lets double the amount of useless media keys.

It is like manufacturers are trying to design laptops like RPG game character classes. The fighter has no magic or stealth. The magician is weak and gets fatigued. The rogue is very stealthy but has poor defence and attack. The cleric can use magic but only to heal so it is useless in battle. The ranger is good at distance but has poor defence and no magic.

The only notebooks sold that are trying to make balanced character classes are MacBooks. Those cost a premium and aren’t reparable.

WHAT THE FUCK IS WRONG WITH YOU ???

Galaxy S8 5.8" Quad HD+ Super AMOLED (2960x1440) 
570 ppi

Galaxy S8+ 6.2" Quad HD+ Super AMOLED (2960x1440) 
529 ppi

oh my fucking god, what kind of retard decided this ?

This resolution is waaaaay too much. It impacts performance and battery life a fuck ton and gives you absolutely nothing in return. I would be cordially surprised if there was someone in the world who could see more than 400 ppi. 300 is more than enough for most of the people.
God these fucks are annoying with their retarded marketing. And even more so, the people who buy these phones, because phone manufacturers can and will continue doing so.
Flagship my ass.

Making electronics more difficult to repair with security fasteners and ultrasonically welded plastic nightmares and what have you.. what's the point? The argument from manufacturers is that "users don't want to get in there anyway". But, it's not like even if they could, they'd want to, right? Which type of person that doesn't know electronics very well and has an interest in repairing it would go and look at a board, and say "this is how it works, this and that is broken and this is how it should be repaired"? Not many users can repair their own devices regardless. So why? To preserve IP? Not like the Chinese bootleggers care about that. To preserve sales? Users can't repair their stuff anyway. To keep those who want to peek inside out, just for the hell of it? Anyone determined enough will be willing to break it in the process anyway.

FFUUUuucccckkk me sideways. So I decided to look into USB type-c's power delivery and alt modes. Cause I kinda want to make an adapter card to run my displays over a single cable. TLDR of the rest: USB-C has some huge capabilities which noone is interested in using since its way to complex to handle for what its worth in the end.
Now PD alone is kinda ok to deal with since a lot of powerbanks use it and some hobby guys documented how to work with it. I find it really odd thou that you NEED to use a dedicated IC for using the configuration chanel to negotiate how much power you can draw. Why the USB standard didnt use some simple 5V low speed signalling? Also the standard says that you only have to implement 5v 0.6A with every other power level being optional. (This is also true for cables. Most manufacturers use only the USB 2.0 standard for them and brag about how fast type-C is. ლ(ಠ益ಠლ) )
Now to the alt modes. These motherfuckers are a real shitshow to deal with. First you need a Mux to deal with USB-C's two way insertion, so your signals wont get flipped. Next thing is that you have four lanes at your disposal in alt mode. Which you can either use for four Display Port Lanes or two DP lanes and two USB 3.0 lanes. (You always get USB 2.0) Now you may think that there would be one simple chip to do it all? Nope you need atleast two at the price of 6$ each. One for PD and one for Alt modes. Both are very hard to solder (QFN, 0.5 mm pitch 40+ pins) TI ended up being the only one with a decent offering of IC's that do what I need. As for working with them, you would think that you just slap a simple MCU on there that communicates over I2C or SPI to configure the chips? Nope! You program the chips memory from which it configures itsself. And the programming is done with some TI tool which gives me no idea as to how you can handle everything whith no control logic behind it.
Looking into alternative IC's leaves me with cypress semi. And their documentation is basically a total mess. I wanna know what that chip is good for and what I need to do to make it work. I dont care about technical details mixed with marketing jargon nobody understands. And I really despise that I have to register just to download a datasheet. Especially since there is no info about it on the main page.
And this whole rant hasnt even touched the topic that USB-C only uses DP and nothing else. So you better hope that you have DP++ so you can use a passive conversion.
This was my Ted Talk about USB-C. Some info in it may be subject to my stupidity and errors as it currently is 02:15 in the morning and I need some sleep.

After getting stuck in the shower this morning; I am starting a petition to get shampoo manufacturers to wrap their instructions in a do-while loop. Telling a developer to "lather, rinse, repeat" is a recipe for disaster...

Someone else disturbing me while I'm thinking about technicalities. Makes me lose my shit because recollecting everything afterwards is often more difficult than the problem itself.

Note to self: tell cleaning lady to keep disturbances to a minimum when I'm working, and turn notifications on the Fandroids off before starting work. No I'm not interested in that Telegram message right now. And God bless OnePlus for putting in a physical slider for that.. more phone manufacturers should start doing this.

HAHA! Google just got fined 4.34bn EUR by the EU! According to the EU they forced manufacturers to preinstall their search app and browser. In my opinion, a fine like this is a nice statement, but doesn't really affect a company that makes 111bn US$ per year. I think there needs to be proper taxation for GAFA!
What do you guys think?

!rant

How I think the process for designing a hardware-driver is like

CEO: "Alright everyone, we have designed and created this great product, now let's write a driver for it!"

PM: "Great then! We just code for Windows, create an eye-catching UI but leave the actual at the worst possible case that could work!"

Dev: "B-But isn't there other OSes, like Linux and Android that people use on their computers too?"

PM: "Shut up! We are going to JUST support Windows and f*** no absolutely other OSes!

Dev: "But what if they are also developers, and want to control and use this great product by programming it themselves? We should make the driver open-source, or at least give them some APIs!"

PM: "Nonsense! They are only going to use this product on M$ Windows, and with the program we provide to them, even if it's crappy and crashes most of the time!"

Dev: "But-but..."

PM: "No buts! That's our final decision!"

And some other consumer devs are like, "F*** it, we just reverse-engineer the codes and write a new driver ourselves!"

:|

management logic.

dev : calling api on every product scroll is a stupid idea. we shouldn't do it. what if user has 100s of products bought?
mgmt : it isn't a practical scenario. in prod, we checked the data and we rarely have customers with more than 20 products
dev : 😮🤷‍♂️

dev : this is a rare issue that only happens for very old devices from this specific manufacturer. even manufacturers have acknowledged this.
mgmt : we don't care. fix it, as per data this error has been logged for more than 12 times (from 1 user only)
dev : 😮😢

I don't know if this is a problem only in Belgium or also in other countries but while I love Bluetooth for audio playback (headsets, speakers and everything) despite being extremely convoluted as a protocol.. FUCK Bluetooth keyboards.

Several of them I've tried. Several of them, from various brands. Pairing, setting the Belgian keyboard layout (which on that shitty Android 7.0 tablet that I want to use the fucking things with apparently has to be done *every fucking time you connect*, because reasons) all well. Except half the keys don't fucking map properly. A keymap, it doesn't get easier than that! How hard is it to make buttons map to the right keys!? They're literally fucking push buttons on a matrix! Seeing which points in the circuit make contact and sending that off to wherever it needs to go!

And to put the icing on the cake? USB keyboards with the same fucking layout settings work without any problems. So it's extremely likely that it's something in those shitty keyboards' controllers or Bluetooth going full rart on all of them.

Of course, Bluetooth being as convoluted as it is, manufacturers just copy each others' implementations of it if they can.. so there's that.

Can really nobody make a product halfway decent anymore before putting it on the market!?

Another one bites the dust.. JUNK!!! Every single goddamn one of them!

Is it just me or does it also bother anyone else when manufacturers pull shit like this (using Apple as example but I've also seen it from Google/Samsung).

i think mobile and pc manufacturers should reduce the magnitude of 0% screen brightness, it looks 100% at night

I am a mechanical engineer first and my companies go to sysadmin second. So software developing isnt really my main field of expertise buuttt:

WHY IS SLOOPY SOFTWARE WRITING A VIABLE EXCUSE?

Story:
Yesterday i started to migrate some stuff from our old Win 2008 Server to the new 2016. Turns out there are some MS SQL Express Servers running. Quick check for what they are turns out that they are activly used. So far so good. For other reasons we have a new MSSQL 2017 Core Licence. So i thought, hey it would be nice to just move those 2012, 2008 and 2014 Express Servers to a real one that can use the entire machines capabilities.
After some try & error with exporting one of the softwares (where i had to elevate one the user rights to sysadmin for reasons) the entire system stopped working. I didnt deleted anything or changed anything! Well, i elevated user rights. After 2 hours of support call it turns out that the software stopped working cause i gave the database user sysadmin rights. I dont know enough about MSSQL to judge wether that is logical or not, but it sounds super illogical and i suspect sloopy software writing on the manufacturers part. One way or another, the excuse from the telephone support was "yeah, our software is a very fragile child"
Okay.
After i told all that my coworkers two of them were also "yeah, that is just how the [company] software is, you have to be careful with it"

Apparently it broke in the past for other minor stuff.
As an engineer i cannot build bridges that collapse when you use the left and the right lane at the same time. For an architect it isnt okay to build an house where the front door explodes when you open a window. It is not okay for a power tool to go out in a fireball when you accidently drill plastic with it. But for some weird reasons its socially acceptable for programs to be sloopy, buggy and only working under specific conditions. Since when is it okay for a car only to work when you know specific steps to make it run? Like, throwing your spare key in the gas tank, the kick the left wheel exactly three times and finally tapping the steering wheel 5 times left, 4 times right. What? That would be ridiculous? But that is exactly how that software works. You have to follow a specific step guide to make it work, EVERY TIME.

I. JUST. DONT. GET. IT

Smartphone manufacturers these days, imagine how meetings to come up with ideas for new products go about.

Product manager :ok people,what can we do to make our next smartphone 'different'.

Employee 1: let's add more cameras
Employee 2:Let's kill the notch
Employee 3:Let's include the buzzword AI in all of our marketing
Employee 4:Let's put 8Gb of Ram in our phone
Employee 5:Let's just do all of those things and also give it a screen with a ridiculous aspect ratio and unnecessarily high resolution.

Dear dongle manufacturers, I love USB-C, I think everyone does; it is the bomb... But.... But but but, please stop charging so much extra for it, I can get a USB-A to Ethernet adaptor for $12 AUD but it's going to cost me at minimum $49 AUD for the same branded dongle, even has the same internal chips... Why... Just... Why!

Arghhhh.

So I'm working alongside a very big development house that specialises in vehicle finance. They are huge - 60 plus developers, only work in pairs, have a minimum fee of £2500 per day and work with all the largest car manufacturers.

However, today they decided to completely change their api sub domain and all api routes that handle finance quotes. No warning at.

Of course sites I'm working on that consume this consume the said api are broken too.

To make things worse, my client pYs this company circa £19000 per year to use their api. I also recently discovered that the client is paying for their so called managed service. Insanity.

I mean seriously. This company has 4 layers of project manager and 3 forms of a senior developer. According to companies house their turnover is in excess of £4 million per year.

However, they get the basics wrong and do not warn in advance of major changes to their core api service.

Off I go to deal with 10 of project manAgers and support people in the hope if speaking to someone who can actually help.

Trying to get some information about a product:
1. Opening the manufacturers webpage, gets a crawler protection page presented, 30 kB
2. The actual website opens, 600 kB + an endless amount of javaScript.
3. Tries to download a PDF, a extra download page is opened, another 600 kB and even more JS.
4 Download the Download a PDF, 3 MB
5. Read the information in that PDF which would fit into 8 kB.

ZNC shenanigans yesterday...

So, yesterday in the midst a massive heat wave I went ahead, booze in hand, to install myself an IRC bouncer called ZNC. All goes well, it gets its own little container, VPN connection, own user, yada yada yada.. a nice configuration system-wise.

But then comes ZNC. Installed it a few times actually, and failed a fair few times too. Apparently Chrome and Firefox block port 6697 for ZNC's web interface outright. Firefox allows you to override it manually, Chrome flat out refuses to do anything with it. Thank you for this amazing level of protection Google. I didn't notice a thing. Thank you so much for treating me like a goddamn user. You know Google, it felt a lot like those plastic nightmares in electronics, ultrasonic welding, gluing shit in (oh that reminds me of the Nexus 6P, but let's not go there).. Google, you are amazing. Best billion dollar company I've ever seen. Anyway.

So I installed ZNC, moved the client to bouncer connection to port 8080 eventually, and it somewhat worked. Though apparently ZNC in its infinite wisdom does both web interface and IRC itself on the same port. How they do it, no idea. But somehow they do.

And now comes the good part.. configuration of this complete and utter piece of shit, ZNC. So I added my Freenode username, password, yada yada yada.. turns out that ZNC in its infinite wisdom puts the password on the stdout. Reminded me a lot about my ISP sending me my password via postal mail. You know, it's one thing that your application knows the plaintext password, but it's something else entirely to openly share that you do. If anything it tells them that something is seriously wrong but fuck! You don't put passwords on the goddamn stdout!

But it doesn't end there. The default configuration it did for Freenode was a server password. Now, you can usually use 3 ways to authenticate, each with their advantages and disadvantages. These are server password, SASL and NickServ. SASL is widely regarded to be the best option and if it's supported by the IRC server, that's what everyone should use. Server password and NickServ are pretty much fallback.

So, plaintext password, default server password instead of SASL, what else.. oh, yeah. ZNC would be a server, right. Something that runs pretty much forever, 24/7. So you'd probably expect there to be a systemd unit for it... Except, nope, there isn't. The ZNC project recommends that you launch it from the crontab. Let that sink in for a moment.. the fucking crontab. For initializing services. My whole life as a sysadmin was a lie. Cron is now an init system.

Fortunately that's about all I recall to be wrong with this thing. But there's a few things that I really want to tell any greenhorn developers out there... Always look at best practices. Never take shortcuts. The right way is going to be the best way 99% of the time. That way you don't have to go back and fix it. Do your app modularly so that a fix can be done quickly and easily. Store passwords securely and if you can't, let the user know and offer alternatives. Don't put it on the stdout. Always assume that your users will go with default options when in doubt. I love tweaking but defaults should always be sane ones.

One more thing that's mostly a jab. The ZNC software is hosted on a .in domain, which would.. quite honestly.. explain a lot. Is India becoming the next Chinese manufacturers for software? Except that in India the internet access is not restricted despite their civilization perhaps not being fully ready for it yet. India, develop and develop properly. It will take a while but you'll get there. But please don't put atrocities like this into the world. Lastly, I know it's hard and I've been there with my own distribution project too. Accept feedback. It's rough, but it is valuable. Listen to the people that criticize your project.

Does anyone else think that phone manufacturers are scamming us with higher specs like 6Gigs of RAM and 16 MP Camera..? Most of us dont even use those 3 GB .. let alone 6..

I guess Motorola decided to join the Slow Down Your Device So You'll Buy The Next Model club. I had a Moto G5s Plus I bought not too long ago. I mainly use it for debugging now.

I mean, can't prove anything, all I can say for certain is their last update, literally, the final one they plan on releasing for that model, made the device so slow it was useless.

So I unlocked it and put LineageOS on it. Not easy, since there's no official build for it. Once I got it working, all the issues with the stock firmware vanished. It runs faster than it ever has.

Now I get greeted with a message when it boots telling me that the device was unlocked and can't be trusted, because, you know, we can all trust cell phone manufacturers to not put a bunch of spyware on our phones.

Windows is more open than commercial Android distributions provided by the major phone manufacturers

Have a nice day ☕

I think CPU manufacturers should start using bogomips as their focal point in advertising.

That poor unscientific measurement is neglected.

We should be aiming for Megabogomips by now people. MEGABOGOMIPS.

I had contact with the BenQ support recently.
On my small GV1 beamer, the auto switch off timer cannot be canceled by pressing a button. So I wrote them, that this is maybe a bug.

That was the answer:

"Thank you very much for your inquiry.

Insects entering the monitor through vents are a common problem that is not covered by the manufacturer's warranty as it is not a manufacturing problem.

This problem is known to all monitor manufacturers.
The cause of the problem is usually that the monitor is used in a dark environment without a secondary light source being activated.

If the insect is still alive, you can lure it out with a light source (the monitor should be turned off and cooled down).
If the insect is dead in the monitor panel, wait until it is completely dry. Then you can carefully press on the screen, next to the insects (avoid crushing them) and it should fall into the panel and leave the visible area.

Nevertheless, please send us a picture where we see the problem you are telling us, I inform you that the picture must be less than 2 MB in size."

Laptop manufacturers--stop messing with the flippin' keyboard layout.

Why do laptop manufacturers have to be such a PITA to Linux?

dear ietf-people i want to thank you that tls1.3 is official. i know it was hard work to say just no to the doughbags and preventing that middleware and spyware manufacturers implementing static keys.
to make it short:
Thank you for your hard work

As a lawmaker, I would grant the right to root.

Smartphone and computer manufacturers must not take measures to block users from rooting their devices.

Why these fucking companies don't support Linux on desktop and get rid of fucking Windows? Dell has developer edition laptops yes but they are not as available as Windows ones. Why don't other companies don't start such a trend? Oh let me say it, money! But as developers leave Macbooks for better choices, I think it's time for manufacturers to start investing in Linux as a replacement.

Dear notebook manufacturers,

do you ever fucking think of how users actually use your notebooks in a company? Almost every company makes use of docking stations. Sooo... Instead of killing my battery over time by being constantly connected to power via the docking station. What do you think of doing some kind of scheduled/more intelligent charging or a charging range? I mean I dont stare 4 hours a day onto my 14 inch notebook display and then think "Oh I need to charge, better use my docking station" and go charging it for 90 minutes whilst staring at two 4k monitors and then unplug everything. My notebook now lives for 20 minutes without a power source... I cant even do proper presentations without using power cable... Please... Do something...

Yeah they will never see this. Just asking myself how you can develop a product do far away from the actual customer

Alright fellow sweaty programmers, mama Kiki is here to teach you the basics of hygiene.

TEETH
- If you have a toothpaste prescription, use it.
- Every single whitening toothpaste is a scam. Don’t use them.
- Every single over-the-counter toothpaste that decreases sensitivity does work. If your teeth are sensitive, use it.
- Otherwise, buy the cheapest name-brand toothpaste.
- Use dental floss. As long as it’s flat and waxed, the cheapest one will do.
- When flossing, never move the floss back and forth as if you try to saw through your gums. Just put the floss in, then out. Repeat if necessary.
- Don’t put your toothpaste on your toothbrush. Put a small amount of it directly in your mouth with a bit of water. Close your mouth and spread toothpaste all over your teeth using a rinsing motion, as if it was mouthwash. Now your teeth are completely covered.
- When brushing teeth, don’t use -90°/0°/90° angles. Use -35°/35°. This way you will spend less time while getting better cleansing. Bristle ends should touch where your teeth meet your gums.
- Get yourself a tongue scrubber. Scrub your tongue until what comes off of it is clean. Dirty tongue is why your breath smells bad, not dirty teeth.
- After you’re done, don’t rinse! Spit the toothpaste out, but let its residue stay there. The remineralization process is now started. If you follow the routine, you don’t need mouthwash at all.
- Drinking/eating sugary things, not washing your teeth and going straight to bed is the best way to get cavities ASAP. In your mouth, sugar quickly turns into the kind of acid that we use for soldering. It can strip the oxide layer off of copper. Do you know how after you drink Coke, your teeth become almost squeaky clean? That’s this. If you like sugary drinks, carefully drink them using a straw. Rinse immediately after you’re done drinking & eating.

SHAVING
- Get yourself an old-school safety T-razor, the one that takes suicide blades. It will last a lifetime. Mühle and Merkur are good manufacturers (not affiliated). Once you have it, for the rest of your life, you will only buy blades. This is the most environmentally friendly way to get a clean, close shave. Electric razors save water, but they often contain batteries.
- Because of how violently electric razor’s blades hit hair while cutting it, they chip your hair. This leads to your freshly grown hair being sharp, rough and unpleasant to the touch. The manual razor, on the other hand, produce clean edges. When your hair grows back, it will be softer than what you get with an electric razor.
- Feather brand blades (not affiliated) are the sharpest in the world. The sharper the blade, the less traumatic it is. Watch T-razor tutorials on YouTube. There are different shaving techniques that will get you a killer shave.
- T-razor blades last considerably longer than their modern soyboy single-use counterparts.
- Because of a single blade construction, T-razor almost never leaves irritation.
- Basically, modern single-use plastic blades are horrible for the environment, and they’re almost a scam for how much you get for your money. They’re only rivaled by printer ink. Use them only for intimate shaving, as they’re considerably handier down there.
- Always shave after hot shower.
- Before shaving, dry the skin surface. Apply shaving foam on dry skin only, as it contains chemicals that make your hair softer. When diluted, they’re not as effective, and shaving unsoftened hair is almost always unpleasant and dangerous.
- After applying the foam, wait about a minute for the foam to work. If the skin gets irritated, don’t wait for as long, or perhaps try a different foam brand.
- Before shaving, thoroughly clean your razor with hand sanitizer or ethanol. Ideally, it should be sterile. Using boiling hot water is also a good option, just be careful with it.
- After shaving, rinse off foam, immediately dry your skin with a clean towel, then apply aftershave. After applying it, don’t touch your skin until it completely dries. If you follow this routine, your skin won’t get any pimples, guaranteed.
- Scrubs won’t help you. Don’t use them.

More in the comments!

Well, been awhile. The latter half of this is probably gonna be unpopular, but the gist of it is that all of the devs working on camera-centric apps, get your shit together, if possible. As mentioned there may not be a way for you to get your shit together, because Google and the others involved ultimately are a mess. In that case, you're dismissed. I haven't proof-read this, so don't take it exactly verbatim.

Woke up this morning to a need for this, so here goes:

----
OPEN LETTER TO SNAPCHAT
----
Snapchat,

You guys need to get your shit together. This is a tack-on to what Marques Brownlee already stated.

I woke up this morning to a seriously FUCKED UP UI. UX didn't change as much, still looks Snapchat-esque. But holy hell WHAT THE FUCK?

I'm not averse to change, despite the above. HOWEVER, there's an exception to that: You cannot change out UX/UI from under me with no warning. I need to know that within the coming weeks, there will be changes to how I interact/interface within the app. An option to opt into testing would be nice as well, but doesn't look like you guys have that figured out. With that testing should come feedback, and something like Jira, where issues can be reported and triaged. You're a company, unfortunately, so I doubt you'd be willing to even go as far as accepting feedback in the first place, which is a shame.

Seriously, as Marques pointed out, Android Snaps are shitty because the app takes a screenshot of the viewfinder and uses it as a photo. There's no doubt in my mind this is something that others do, but all Android devs need to either not pull this (because it's not clever) or just not make apps (quality over quantity).

I would like to see either Google step in and require a native API that is the same across all devices and leverages all cameras to their full potential (I want to say that Snap's issue stems from an API provided by Google. In this case, Google, get your shit together), or alternatively I'd like to see manufacturers band up to provide a uniform interface to deal with this. Because I don't see the latter happening anytime soon, Google needs to do something about this, although I feel like they probably won't. That said, IDGAF WHO it is, I just want it FIXED.

#just Bluetooth headphones things

When you're sitting on crowded public transportation and can't hear anything unless your phone is closer to your headphones than anyone else's, i.e. unless it's close as shit to your face 😍😍😍

When you want to listen to music for longer than 2 hours or several times during your workday but can't because the BT headphones last 2-3 hours 😍😍😍

When the left and right side don't pair with each other but you can pair with each individually 😍😍😍

When half of the button presses and user interactions aren't documented and there's no way to forget a device 😍😍😍

When you try to connect a new device to them in a public area and just see a dozen random serial numbers, so you have to wait and hope they get resolved to the headphone brand name 😍😍😍

When Satan takes your soul and the Bluetooth connection drops in hell 😍😍😍

When the music quality is lower and can experience static and maybe even skip in between 😍😍😍

When the bus hits a road bump, it falls out of your ear, and rolls halfway down the bus 😍😍😍

When it takes a long time to find them because they tiny af, and just as long to find the charging cable 😍😍😍

When manufacturers cannot agree on a standard volume sync system and so you have to check the volume and adjust every time you connect and disconnect your headphones 😍😍😍

Can we please just stop making everything Bluetooth?

Sincerely,
Someone who just wanted to listen to a 2 minute billie eilish song but found it easier to sing in his head

No desire to work hard or learn new coding stuff. This world is so messed up now that I have a difficult time caring about anything anymore. I spend a lot of time browsing for and posting anti-wokeness and pro-libertarian memes and watching the world burn down around me under the illusion that it’s being “saved” and “improved” by monopolistic authoritarian governments and technocracy. All that’s really happening is a handful of really powerful people are pissing on our heads and telling us it’s raining. Invest in umbrella manufacturers.

I was cleaning a closet and found this. It's the bag that had a couple extra pieces for my riding lawn mower.
Questions:
1. Who isn't aware that you can seriously injure or kill any animal (including humans, especially small ones) via running them over with multiple, sharp, quickly rotating blades?

2. Who the hell is allowing morons that don't realise this around minors?

3. For people who aren't already aware of the seemingly obvious dangers, are they even willing and/or able to read this?

I know we live in a world where people sue manufacturers and retailers for plastic bags that they leave by babies and coffee being too hot, but seriously... wtf

If all phone manufacturers could just ship their Android devices with an sqlite3 executable installed, my day would be so much easier.

Developers switched from Windows to Macs because monkey-boy Ballmer claimed to want Developers whilst doing his best to drive us away - and Macs were a Unix laptop "That Just Worked".

Now we are going to have a MacBook "Pro" that doesn't even an Escape-key.

Great news for manufacturers of Windows ultrabooks - Asus and Dell must be rubbing their hands with glee!

Woah, heading to the “valley” in May for a business trip, meeting with two chip manufacturers... 8 hour flight

I had computer internet connectivity problems so I searched for a solution. The Microsoft help site said 'download the latest drivers from the manufacturers website'. HOW AM I GOING TO DO THAT WITHOUT AN INTERNET CONNECTION!?

Just setup a new phone cause old one is flaking out. Spent two hours uninstalling bullshit. The default weather app had fucking tiktok video ads running in the app! Fuck you motorola! I uninstall this piece of shit weather app. Then this non shitty weather app appears. Fuck you motorola! That should have been the default. Turned off all the suggestions bullshit, uninstalled like 20 garbage pos apps, took 10 minutes to figure out how to shut off phone because new android os is fucking retarded. Fuck you google! Seriously you changed the fucking power button to pop up the stupid voice shit! Fuck you google!

The whole time I am waiting for the setting I can't change so I can return this shitty phone. Fuck you motorola!

I dunno, we will if this isn't complete shit.

STOP RUINING EVERY FUCKING THING! Fuck you shitty ass phone manufacturers!

At the end of the day, at least I ain't a retarded Apple user... I am just a retarded aNdRoId uSeR!

What did go smoothly? Transferring my old data wasn't complete shit. Its a 5G phone, but it still only seeing LTE. Fuck you T-Mobile!

I hope there was enough "fuck yous" in this post.

I understand the reasoning behind switching to a new, maybe better, technology, but for fuck sake, it’s against typical Microsoft strategy to “kill and shoot to the dead corpse” something instead of maintaining backward compatibility. Why they’ve changed?
I still can develop VB6 software for Windows 11 that just works. But you removing newer tools for no reason.

In short: Xamarin is dead, and that’s alright, but they are even deciding to “remove” development tools from future updates of VS 2022. Why?? Keep it optional, allow me to write legacy code (just 4 years old actually) a bit longer. 🙃

And also, .NET MAUI doesn’t seem “great”, at least at the first sight.
Why you’re forcing me to switch to it if there are 0 benefit for my product?
It’s so bad the only way to bring developers is this one?!

What is incredible to me is that the “industry field”, which is HUGE is so often ignored because of the “customers field”. Keep them separated. If you don’t want to support old tools, just don’t, but leave them there.
They killed Windows Mobile 6.5 which was old but still alive and fine in the industries, you had the biggest market share in PDAs and decided to give it to fucking Google.
The manufacturers kept selling WM devices even in 2020… and they stopped just because you stopped selling licenses.
You acquired Xamarin, gave everyone for free the tools to keep writing .NET for Android and move the industry apps, and now you are saying “actually fuck you, do it again, even though nothing really changes, but convert your entire project to this bs we’ve created”. Why???

Microsoft response: it’s just a few clicks and everything works fine.
My response: No, it’s not… the entire UI is rendered in a different way, I have to rewrite the whole UI of my app and a lot of modules stopped working because of nuget packages I can’t install anymore…
I have to spend additional time to make it work THE SAME as before, not better. So what’s the fucking point?

Whelp, I made the switch to android about a week ago. Didn't go two days without getting malware on it. I only browse hacker news and used devRant, standard messaging app, no root, so no shady things, just fairly standard things besides devRant. When I called Samsung support, they said it was a known issue and sent me some links to some forums where people were having the same issues. After digging through those threads, there was an official answer from Samsung saying they weren't going to fix the issue (at least in any foreseeable future). That's unacceptable for a phone that was released less than a year ago.

I'm done with Samsung phones for good. I might come back to Android on a google phone.

I hate how Android is distributed and the manufacturers don't take ownership of their issues. They just work on the new phone without caring for anything older than 6 months. If I had to get a new phone every time a major security issue was found and the company refused to fix it, I'd spend more money than on an iPhone.

It seems like Google keeps their devices up to date better, presumably because they have better control of OS releases. But non-google Android devices are dead to me.

Back to my iPhone for now...

🎵sad Charlie Brown music🎵

Being a native Android dev for most of my college days(yet to start a full time professional life), i often feel scared of my life choices.

Like, i chose to go into a field in which am totally on my own . Android is not a subject taught or supported by colleges, so a virtual shelter that every fresher gets, i.e that of a "he's just a college passout, he wouldn't know that" is not for me. I am supposed to be a self learner and a knowledgeable android dev by default.

Other than that , idk why i feel that am having a very specific skillset which would be harmful for me if am not the best at it.

I feel the same for entire Android dev. I mean, its nothing but a very specific hardware device with a small screen and a bunch of lmited sensors. Our tools and apps are limited to just manipulate them to do little fancy stuff offline. Other than that everything (and sometimes even this too) could be achieved by a website/webapp of a web dev.

A particular native android dev don't know how the ML/AI stuff works, don't know how backend stuff works don't know how the cloud stuff works, jeck we don't even know how those unity games work!

We are just some end product makers taking data from somewhere handled by someone and printing them in fancy gui.
(But we are good at ranting about stupid mobile hardware manufacturers, i tell u that)

So am not sure if being an Android dev is a going to be good for me in the future. I mean , a web dev always gets to interact at every level of products, but we can't.

I always feel my future will end up being limited to being good in Android, later shifting to IOS to being completely unemployed because everything is controlled by js and web dev tools and native programming is no longer a thing anymore :/

Can't download YouTube videos (disk read/write error) caused by another corrupted 1-year old SD card. Sucks when manufacturers/vendors don't include the chip's lifespan

Ok, this question is related to mysql and php.,
Let me state the current situation
I have a db, say "gd".
That db has several tables all with same columns.(i.e same fields for different manufacturers such as product name, cost , stock etc.)
Now i want to know how many tables have the product 'a' in them and what's the cost of 'a' in each of those table.(tables are generated dynamically so I'll never now how many tables are there, well ofcourse i can refer information schema, but just wanted to highlight this fact). So is there a way to achieve this?.. excluding "dump the whole data and then search it" solution.
Plz help, .. sorry for my bad English, .

I got tired of the redundancy of giving instructions to my parents on how to use our DVR, so I wrote the instructions on a white board. Appliance manufacturers kept coming up with upgrades; I wrote more instructions. After 4 years of computer science courses, lots of books, and hours googling, I was able to create instructions for my personal gadgets and my clients' machines.

This morning I had an update to my one plus 3t

I now have face unlock...
And the latest (almost every few months) Android security updates

This is how software should be, this is how phone manufacturers should utilize their os, not by slapping some heavyweight skin on it. But by keeping it stock with added features. And when the time is right new features, most importantly security updates

I've started my training as a Software Developer two weeks ago, at a company that creates systems for car manufacturers to ensure that they're build correctly.

I've been in Stuttgart since Thursday where we are installing that system for Porsche.

Not really that related to software development, but it's a great experience. Especially because we get a 24€/day bonus for food and drinks (that's mandatory in Germany) and eat delicious food every day after work. :P

Kicking myself. Not only will I be unable to drive the 7 hours to the path of totality for the eclipse, I also neglected to buy eclipse glasses until the last minute. The only store around me that still had them sold out yesterday and it's too late to order online from the few manufacturers that still have them. Can't even find welder goggles in the right shade (14 or more). Why do I put things like this off until the last minute?!

I was trying to recover an external hdd, which was not spinning at all.

I started by changing the enclosure, using the SATA port, using another enclosure, now the only possible culprit is pcb.

On testing with multimeter I figured TVS diode was damaged, and since I don't have immediate access to a new pcb, I opened one of my old hdd and desoldered pcb from there and using wires I attached this salvaged TVS diode to the pcb.

It didn't work.

During the research, I came across the fact that different manufacturers make different pcbs, what the hell, I wish there could be some standardisation so people could just swap things easily instead of finding another hdd of the same model just to salvage the pcb.

What's with the updates in our technology ? has it always been this situation that Computer manufacturers stop providing upgrades after a few time?

Like android tries hard, but no device older than 3 years is going to get the latest android . i phone guys say they get the latest ios on iphone 6 plus, but isn't that also like 6 generations later device?what about iphone 4s or iphone 3g or iphone1 ?

So far i guess microsoft and laptop manufacturers are winning at this area... i believe i could find some peeps with their 10 yo fatass pc running win 10 . Or maybe iot, i am not sure but i wonder if those microwaves won't be compatible with the latest version of whatever OS they are using (if there is a mechanism to update one)

I was actually reading about the operating systems. My point regarding this post was that the OS's have been architectured to be modular and h/w independent for years . Nearly every OS has this HAL layer which literally has the function to abstract hardware and give apis to system such that whatever the hardware there is down below, the system would not have to worry.

So why does new updates to the os not pushed to older devices? why do manufacturers give the reasons that we don't push updates because the hardware is incompatible with the os?

Recently many of us may have seen that viral image of a BSOD in a Ford car, saying the vehicle cannot be driven due to an update failure.
I haven't been able to verify the story in established news sources, so I won't be further commenting on it, specifically.
But the prospects of the very concept are quite... concerning.

Deploying updates and patches to software can be reasonably called *the software industry*. We almost have no V0 software in production nowadays, anywhere (except for some types of firmware).
Thus, as car and other devices become more and more reliant on larger software rather than much shorter onboard firmware, infrastructure for online updates becomes mandatory.
And large scale, major updates for deployed software on many different runtime environments can be messy even on the most stable situations and connections (even k8s makes available rolling updates with tests on cloud infrastructure, so the whole thing won't come crashing down).
Thereby, an update mess on automotive-OS software is a given, we just have to wait for it.

When it comes... it will be a mess. Auto manufacturers will adopt a "move fast and break things" approach, because those who don't will appear to be outcompeted by those who deploy lots of shiny things, very often.
It will lead to mass outages on otherwise dependable transportation - private transportation.
Car owners, the demographic that most strongly overlaps with every other powerful demographic, will put significant pressure on governments to do something about it.
Governments (and I might be wrong here) will likely adapt existing recall implementation laws to apply to automotive OS software updates.
That means having to go to the auto shop every time there is a software update.
If Windows may be used as a reference for update frequency, that means several times per day.
A more reasonable expectation would be once per month.
Still completely impossible for large groups of rural car owners.
That means industry instability due to regulation and shifting demographics, and that could as well affect the rest of the software industry (because laws are pesky like that, rules that apply to cars could easily be used to reign in cloud computing software).

Thus... Please, someone tells me I overlooked something or that I am underestimating the adaptability of the powers at play, because it seems like a storm is on the horizon, straight ahead.

Lenovo IdeaPad Y700 (and possibly (m)any other NVidia GPU laptops)

framerate fluctuations in any game - runs silky smooth for few minutes, then drops to borderline unplayable framerates for a few minutes.

Thousands of people across dozens, maybe hundreds of internet forums having this problem for years, since the thing was released.

I personally lost at least 20 hours trying to solve it, and had the laptop in gaming-unusable state because of it for the past half a year.

...yesterday I FOUND A SOLUTION!
1. Download NVidia Inspector by Orbmu2k
(some hobbyist hacker type)

2. use its "profile inspector" to flip an internal setting in nvidia driver.

3. flip "Enable application for Optimus" to SHIM_RENDERING_MODE_ENABLE to basically tell the "Optimus" crap to fuck off.
(not sure why the value is called this, because it's clearly disabling the thing)

4. the thing works flawlessly silky smooth again.

...thousands of people across dozens, maybe hundreds of forums...
...i could be their Lord and Savior...
...if only I weren't too lazy to hike across all of them and register just to post the solution.
(tech forums really should have some "I HAVE A SOLUTION but if i have to register I won't bother")

also...
WHY
DO
WE
KEEP
LETTING
HW
MANUFACTURERS
WRITE
SOFTWARE?!?

I just wish phone manufacturers would put the charge port on the back of the phone instead of on the sides. Don't they know everyone rests the phone on their chest in bed? It would also solve the problem of replacing knackered cables.

Three days out from a field trial, I receive a bug report and change request. A month ago I was told that testing had been completed and the feature set signed off.

Not only have all our manufacturers received their hardware images, not only have they fulfilled our orders but all units have been delivered to our customers!!

After pointing all of this out I hear that wonderful phrase all Devs know and love, "well how hard can it be?"

"Well how hard can it be to flash all of the hardware?"

That has been delivered to all of our customers?

In every state?

All over the whole country?

Just No!

I'm pretty anti-apple but it's clear that the 3.5mm jack and the standard USB port is going to go. Other manufacturers will be using only type C very very soon. BT > 3.5mm and everything will use type C USB.

Cereal is one of the most popular breakfast foods worldwide. According to the National Cereal Day website, Americans consume approximately 100 billion bowls of cereal every year. With such a high demand for cereal, manufacturers are constantly looking for ways to make their products stand out. Custom cereal boxes are an excellent way to differentiate your product from competitors. In this article, we will explore the benefits of custom cereal boxes.

Enhanced Brand Recognition

Custom cereal boxes allow your brand to stand out on the shelves. With unique packaging, your product is more likely to catch the attention of potential customers. When a consumer sees a distinctive box design, it becomes easier for them to remember your brand, making it more likely they'll purchase your product in the future. Custom packaging can also reinforce your brand's messaging and values. Whether you want to promote a new product line, a charitable initiative, or just your brand's logo, custom cereal boxes provide an excellent opportunity to showcase your brand in a visually appealing way.

Increased Product Appeal

Custom cereal boxes can make your product more appealing to consumers. Unique designs, vibrant colors, and creative patterns can create an emotional connection with your target audience. Your custom cereal boxes can be used to convey the quality of your product, the nutritional benefits, and the flavor. Consumers will be more likely to pick up your product and try it out if they are attracted to the packaging.

Competitive Advantage

The cereal market is highly competitive, and custom cereal boxes can give your brand an edge over competitors. With unique packaging, your product will stand out among the other cereal boxes on the shelves. Custom cereal boxes can also be used to create a sense of exclusivity, making your product more desirable to consumers. Consumers are more likely to purchase a product that appears to be of higher quality, and custom cereal boxes can help create that perception.

Improved Customer Experience

Custom cereal boxes can improve the customer experience by creating a memorable and enjoyable shopping experience. Unique packaging can create a sense of excitement and anticipation for the consumer. Additionally, custom cereal boxes can provide useful information to the consumer, such as nutritional facts, ingredients, and serving suggestions. Consumers are more likely to have a positive experience with your brand if they feel informed and engaged.

Eco-Friendly Options

Custom cereal boxes can be designed with eco-friendly materials, making them an excellent choice for environmentally conscious consumers. With the rise of eco-friendly products, custom cereal boxes can help your brand appeal to consumers who are looking to make more sustainable choices. Additionally, eco-friendly packaging can reduce waste and promote a positive image for your brand.

In conclusion, custom cereal boxes offer many benefits to cereal manufacturers. From enhanced brand recognition to improved customer experiences, custom packaging can help your brand stand out in a crowded market. Whether you're looking to promote a new product line or create a sense of exclusivity, custom cereal boxes are an excellent tool to help you achieve your marketing goals.
If you are also looking to increase your sales, get custom cereal boxes from OXO Packaging.