PM: That screwdriver you built me is really nice. I like how it works with all screws and bolts, does the work itself, etc., but I simply can’t get it to paint, and I really need it to cut my sandwich. Can it cut my sandwich?

PM: Also, since you finished it, the neighbor’s can opener doesn’t work, my dog got fleas, and our screw supplier ran into shipping issues. Fix these ASAP!

Bonus:
Also, remember that hack I forced you to do despite you telling me it wouldn’t work? Yeah it isn’t working. You need to fix that too.

Yes, i feel guilty...

I'll get to my four words in a sec, but let me set the background first.

This morning, at breakfast, I fired up my trusty laptop only to get a fan failure warning.

Finally, after the three year old is asleep tonight, I'm able to start dismantling the case to get to the fan. I'm hoping it just needs cleaned out.

Hard drive, memory, and keyboard spread out over the kitchen table. I'm not even halfway done.

Guess what? Now I'm one of the lucky 3500 people to have a power outage at 9 pm. Estimated restore time: 2 am.

Sigh.

"All those tiny screws"

And a three year old in the house...

You know, you fucked up when there are extra screws after assembling a device.

Funny how the number of screws I end up with after assembling my computer never matches the number I started with.

This is when Google screws up.

Who needs Kensington locks when you can tighten up those screws?

In electronics there's 3 options.
1. You pay a small fortune to get something decent.
2. You pay a smaller fortune to get crap.
3. You build it yourself and it'll be nicely priced AND decent.

Why is that? I have no idea. Profiteering gluttons perhaps.

Case in point: my watch. A waterproof one, so you'd expect to be able to take it in the shower, which I often did.
But then, le wild drop from 50cm height occurred and the whole thing just popped open, with soapy water rushing in. Luckily it didn't short out, and I quickly evacuated it out of the shower and dipped it with my towel.

Then already I thought.. what the fuck is wrong with the designers of this thing?! I'm all for keeping the inner parts of electronics accessible for self-servicing. But in a waterproof watch you wouldn't expect the backside to pop right off and expose the bloody internals, would you? So that's one thing. While evacuating it I quickly figured that I'd want to remove the battery immediately.. except that fucking thing was screwed in place?! WHAT THE FUCK?!! Use those screws to keep the fucking backside of the watch in place you certified pieces of shit that designed this craptacular piece of garbage!!!

Finished showering, went ahead and troubleshooted the thing. Miraculously it still worked. Except that now the UI of the fucking thing is biting me in the ass. A single button on the watch is used to operate the whole thing, and get it to set itself to the correct time, get radio signal, go in sleep mode (where the watch stops ticking, for storage purposes) and activate itself again. So I dived into the manual.. and still couldn't get it to work properly. So it's got one button just like an iPhone, it craps itself when it's dropped just like an iPhone, its design is shit just like an iPhone, and it's completely unusable when it craps itself just like an iPhone.

And the manual... Oh fucking shit. It specifies that the watch is 3 bar water resistant, yet apparently you can't take it into the shower. 3 FUCKING BAR!!! That's supposed to enable you to take a fucking dive with it! And apparently you can't drop it either.. who would've thought, when they lock it with no more than outwards pressure from the back plate into the main body! How difficult can it be to use fucking screws, and to make it watertight put some rubber bands or whatever?!

CERTIFIED MOTHERFUCKERS!!!

And the watch, it's in the garbage can right now. Right where it belongs!!

Goddammit ASUS..

My laptop was not able to boot unless plugged in because of malfunctionning built-in Intel Anti theft technology.

Turns out its deprecated and there is a software available to remove it

So I installed windows to be able to run it but it was not working no matter what.. Turns out it was also deprecated and not supported anymore, so there is no way to remove the faulty anti theft system..

I sent my laptop to ASUS so they could find a way to remove the software and I got the reply "we will have to change the motherboard, it will cost $600"

No way I am paying this much for something that was supposed to be a software problem so I asked them to cancel and send it back

Now I got it back and its not even booting anymore and theres a few screws missing

Goddammit ASUS...

Don't you hate it when amazon algorithm screws up and recommends you incest anime?

My potato lagged with the temperature too high error message.

So I decided to operate on it. Last operation was about 40months ago or more.

Every time I opened and reassemble something, I always ended up with extra screws (check comments). Wish they were gold 🤔

And this is probably the last operation I could perform on it. I must save fast to buy a desktop 😥

Just disassembled 2 €5 desk fans because they were shit.. and so is their design apparently.

What I found inside was actually surprisingly simple.. a toddler could build it. It's just a DC motor, a 3PDT switch, DC barrel connector, some wires and screws to hold stuff in place. Oh and the plastic thingie with the fan blades, as well as the USB cable of course.

5 fucking euros. The combined cost of the components would be less than 3, certified motherfuckturers. Time to build it, injection moulding, transportation, sure.. but still.

And if you think that being salty about €5 is cheap shittalk, expand that to every fucking piece of electronics that doesn't cost a small fortune.. at all price ranges. Could be radios, alarm clocks, heck even phones. Shit's way too expensive for what it's worth. Perhaps because so many people in the industry are just here for a quick buck.. motherfuckers 😒

Anyway, back to the design.. the hole in the fan blade thingie is supposed to get the motor's shaft shafted in, to turn the blades. I'd use glue there.. but not these designers. They just shove it in and hope that friction takes care of everything. And one of the fan blade modules' hole was so wide that inserting the motor is like throwing a sausage down the hallway. No contact at all! Make it tight already like the Chinese designer's glory-...
Nah let's not get into Chinese tightness just yet.

Oh and also a resistor for slow mode. Consumes just as much power except the fan turns slower. Because fuck efficiency, right?

Goddammit, next time I'm just gonna build my own again.. at least that wouldn't be a certified piece of shit 😑

Fuck stripped screws. A big FUCK to all those manufacturers using fucking cheap screws. Fuck them all.
Now, I am stuck here. Don't have the equipment to remove this motherfucker.

* Got an epileptic seizure
* fell down
* broke my left humerus top to 3 pieces
* bone pieces will be held together with titanium plates/screws tomorrow with surgery
* need some good wishes although I am hardcore materialist
* thanks in advance.

Do you know when you think "Oh that doesn't look too hard. I bet I can do it in no time"?
That is how I felt when I saw the DIY 3D printer kit Anet A8. It's only 150€ on gearbest so that is pretty cheap.
The reviews said it takes about 3 - 4 hours to build and I though "Ok I am a computer specialist and engineer so 3h sounds reasonable".
When I bought it from gearbest the first problems started: 5 days after the estimated shipping date the packet was still not on its way. After I fucked the support up, it finally arrived 3 weeks after the estimated date.
When I took the first look, everything seemed to be fine except for some small scratches but for that price that is not a problem.
So I started to build the printer at about 14:00 and even if some random sites in the manual were in Chinese I felt confident to get it done in a view hours.
And then it started to get really fucked. The first problem was that 2 screws were unusable and I had to use my own screws instead. The next problem was that the manual was just in the wrong fucking order at some points and I had to reverse multiple steps to get it right.
But the most fucked up thing: There should have been 2 threaded rods with a length of 345mm but the rods had a length of 310mm which was nowhere listed in the parts list. So I had to go buy some aluminium rods to fill the gap temporary so that I can at least go on with the build before getting a replacement. And I could go on and on and with the problems but the point is, it is now 19:30 which is about 5.5 hours after I started and I am still not fucking done with this.

So what have I learned?
Cheap Chinese hardware is good, but only as long as you don't have to assemble that shit yourself.

Oh hey, no extra screws. Today is a good day

Son a fucking bitch!
I ordered a brand new shiney SSD for my Inspiron 7573 which came in today. I was all set up with system backups just in case and install media for Debian and Windows standing by. I pull out my tools and realize that the laptop isn't going to have a screw inside to hold the drive in since it didn't come with a SSD. No big deal, I pull out the magnetic bowl of extra screws from all the previous repairs I've done and start looking for the screw I need. I can't find the screw I need so I go online hoping maybe I'll find someplace in town that will have one single screw with no luck.

Now I get to wait 2 more days for the screw I need to arrive from Amazon.

Kid brings me an ancient Chromebook with non-functioning "t" key.

I crack open the case and remove a bunch of screws trying to get to the keyboard.

No can do. This thing is built to basically self-destruct upon user tampering (Dammit, China!!!)

Put it all back together with the intent of trying to wipe it and recycle it.

The "t" key is suddenly working fine.

I feel like I'm in an abusive relationship with Ubuntu.

I love it but whenever I'm with it it screws up my environment and doesn't work when I need it to.

I go back to Windows reluctantly and get everything set up and stable. I'm happy, but not excited about it. And then, within a few months, I get that thought. Maybe if I put enough work in I can make Ubuntu work for me as my main environment.

I noticed my co-worker has been using Atom editor for everything (we do Java/Scala). I asked, "So are you using the new language servers? How are you doing code completion?"

"I don't use code completion. I turn it off."

O_o "Do you not use screwdrivers? Like do you tighten screws in by hand?"

I've know people who code Java/Scala in emacs and vim, but they still had completion, type-lookups, etc. They was a higher learning curve in knowing all the keyboard commands, but all the tools were still there. I don't get people who refuse to use tools. It's reflected in this guys works too when looking at the code reviews.

When all you have is a hammer, everything is going to look like a nail.

That feeling when a coworker screws up totally. doesn't accept it as their fault.

You look at the code and see so much of redundancy and bad practice galore.

You look at it for a while and think you can rewrite it from scratch. But you finally end up saying "fuck this" and feel hopeless because there is not enough time.

Hate that feeling. Hate it. Depresses.

I'm a backend (Java, Kotlin) developer and I mainly design & develop services and Android apps which consume these services.

My team in my current organization (I've been working here since past 2 years) just got merged with another team.

And now the new boss wants me to fix some fuck ups in their project which is written in C#, with some WCF and other stuff.

As this stuff is completely new for me, I asked for some time to get familiar with the environment. But the answer was a big NO.

As a result, "I've started looking out for a new job"
😡😠

Fuckin management screws up everything!

I thought I'd opened every shitty type of Chinese-grade electronics by now. Glued in shit, ultrasonically welded shit, potted shit. And occasionally the now very rare piece of electronics that has actual screws.

Until now. Remington, apparently yet another company filled with certified enganeers. My razor is from them, and I wanted to open it up to see why the lithium cell inside was failing, and to replace it with a bigger one. 2 screws in the back of the unit, Phillips head. But holy fuck, those things sat in there more tightly than the glory hole of the Asian girl that probably assembled this thing. Externalizing our own features in our craft? Check!

Pretty hard to remove them but that's fine. But the unit didn't open up, and there seems to be no screws left. I guess that they leveled up their level of certified enganeering and actually used both screws and ultrasonic welding. Because why wouldn't you, right?!

Motherfuckers.

I decided to redo the padding on my chair because it was getting uncomfortable. All the screws they used to put it together were at least half an inch too long. I was basically sitting on nails.

So I found this consulting job a while ago thinking that some extra cash while studying would be nice to have.

I meet with the guy, a researcher trying to start a business up, good for him I think, maybe we'll hit it off, continue working, why not? Except he has no clue how to write working code, all he ever did was writing matlab scripts he says, thats why he hired me he says.
Okay, fine, you do your job I do mine.

He hands me the contract, its about comparing two libraries, finding out which one is better suited for his job, cool, plots and graphs everywhere.

Except this is an unpaid job. YOU WHAT?! It's a test job. FINE. At least it'll look good on my resume.

We talk about the paid part where I'm supposed to scale the two libraries, looks good, as expected from an ML engineering perspective. It comes to payment. The dude has no idea how taxes work, says he has a set amount to pay and not a penny more. I explain with examples how taxes are paid, how you get reimbursed for them and so on. Won't budge. Screws me over.

Opens the door for other jobs I think, he'll learn next time I think and take the job.

Fast forward a month, 90% of the job done, he adds a third thing to compare. Gives a github link to a repo with 2 authors, last commit a year ago. There are links to a 404, claiming compiled jars. Fuck.

Not my first rodeo, git clone that shit, make compile, the works. The thing uses libs that ain't in no repo, that would be too easy. Run, error, find lib, remake all the things, rinse repeat.

The scripts they got have hardcoded paths and filenames for 2 year old binaries, remake that shit.

It works, at least I get a prompt now. Try the example files they got, no luck, some missing unlinked binary somewhere, but not a name mentioned. Cross reference the shit outta the libs mentioned on readme, find the missing shit, down it.

Available versions are too new, THE MOLDING NUTCRACKER uses some bug in an old version of the lib.

I give up. Fuck this. This ain't worth the money OR time. Wanker...

New developers. Tip: There is no silver bullet.

If you like Python, please understand GIL's behavior before making a system that handles thousands of requests.

If you like Java, know that "Write once, run anywhere" is a fallacy. Even application servers don't like the same WAR.

If you like PHP, understand the life cycle of a request before connecting to the database from all corners.

If you like C#, don't make it a small command-line application that will be used on FreeBSD.

If you like C, meet valgrind.

If you like C++, templates are cool, but don't overdo it. And take the opportunity to meet valgrind.

Never use the same tool to do everything. Elect the language and framework for the given need with rationality.

Every time I see a "Java Man", a "C++ Chad" or anything like that, it comes to mind that if he were a carpenter, he would be tightening screws with hammers.

Every lock-in is bad.

Thanks guys for the help in the last weeks.
This is what I was so hard trying to print.
Btw... reminder to self, plastic expands. That's why the stepper has duck tape instead of screws lol

It's actually safer to use a flat head screwdriver bit to screw and unscrew Phillips head screws than the screwdriver bit that's actually designed for it.. because reasons.

Fuck Phillips heads, they're fucking junk. They're quite a decent match for the shit that consumer electronics often is though... But for anything halfway fucking worth it, why don't we use something like Torx or tri-wing already?! Or rather, anything that isn't Phillips or Pozidriv. Anything that doesn't fuck right off when you slightly overtorque it (without stripping the threads) or want to unscrew it.

After several long nights of learning to resize encrypted lvm partitions, fixing grub, finding screws, and waiting....

I finally managed to move my system files from the old drive to the new SSD.

AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH

I tought I'll buy a new laptop last week.

Went to the mediamarkt. I've choosen one with hdd. That was cheaper and I have a nice ssd at home, so I tought I'm gonna change that so I've asked the salesman about the hdd. I mean if I take it out and replace it with an ssd, it'll invalidate my warranty? Said yes. But they gladly change it to me if I bring my ssd in for a dirt-cheap €79. I said you are defenetly lost your mind. It takes 5 screws and around 5 minutes.

Anyway. I've choose an another one with ssd. But there was a sticker on it too, means it is prepared to use out of the box. It means as always, the windows is full with advertises, demos and annoying settings. And I don't use windows anyway. Ohh and it costs €29. I wanted one without this thing. Said ok, he'll check it. Comes back and said these modells are all prepared with this. I've asked him to show me a product which is 'clean'. He replied "actually all our laptops came prepared".

So I went mad and left them. This whole procedure takes more than an hour with one lesson: never go there again to buy a computer.

But at the end I've found a solution. Configurable laptops with 2 year warranty even if you upgrade it. Thats what I'll buy soon. I've had enough of big brands bullshits about unnecessary features and other bullshit. I'll buy what I need, not more, not less.

I'll write down the brand if anyone interested.

Recently not a single fucking thing is going my way...... Every goddamn new thing i try, screws me over in some way... And when I finally think somethings working, I get fucked more than a highway hooker.

!Dev / story

My phone starts dying gently but surely. Since last week I cannot use my jack input anymore, and thus can't listen to music in the car. I also compose music, and was eager to listen to my latest production (for reviewing purposes) in the car. In my frustrated search for a spare device with a jack, I found a pile of blank CDs instead. "Aw yiss, I can haz music in my car" I thought with a huge relieved grin.

I grabbed a CD, looked at my pc, and my grin faded instantly to an "oh" of disappointment: I deliberately did not install a CD drive in my computer.

Not losing hope, I grabbed my Mac and tried inserting my blank disk in the drive. "Clunk, clunk", the cd won't go in. "Ah silly me, I replaced that drive with a SSD". So I went looking for that spare cd drive.

After I found it, its SATA power interface was smaller than regular SATA devices, and any connectors I tried were too big. "Hmpf, ok, I'm desperate, let's remove that SSD in my Mac". So I went grabbing some screwdrivers, removed the cover lid underneath the computer, and removed two screws from the SSD casing, allowing me to lift the unit up, disconnect the cable, plug in the cd drive, flip the Mac carefully, turn it on... And burn my CDs, and finally I resetted everything back to normal, carefully removing the cd drive and closing the computer.

What one doesn't do in frustration...

THERE ARE NO SCREWS HOLDING YOU TOGETHER JUST FUCKING COME APART COME ON

Last night I was told I had an doctor's appointment...

That screws up my plans for joining a Hackerrank Code Sprint

Well this morning there was a thunderstorm and just before leaving, got a call from them.

The appointment is canceled because they don't have power!

The funny part is today is gorgeous, sunny and warm.

So is this like an act of a god, Hacker God?

Hello senior devs.. . What happens if you screw up? I mean if a junior dev screws up, the senior helps.. right?

Idiot mode: on

It's bad when you realize you are the most idotic person you know. I just bought a wifi card replacement for my laptop only to find out that one of the screws on its back was completely unscrewable. I foolishly decided to force my way through by forcing the plastic. I tought I got away with it as I only damaged a plastic support tighten to the laptop base but now, my laptop screen isn't showing anything.

When I first booted it up after this, it was working, but it started showing troubling signs shortly after. Now, all I can get out of it is a completely black screen, no backlight at all.

What should I do? 😥

My macbook base is missing four screws (I'd upgraded a few weeks ago...and I lost the screws) and now the base is all loose and wobbly :@

So, I got an iFixIt toolkit with a gift card from xmas. Was excited to tear into my iPhone6 given that it had lasted me a long time, and not that long ago, I had the screen repaired given I didn't know how to at the time and was working stupid long hours. I haven't used the phone in about 6 months now.

Wtf.

I open the device, and immediately 2 screws and a bracket fall out of the device. The inside is filthy, and appears to have corrosion (despite the fact I've never gotten water on it, I was kinda anal with that phone).

Whoever the guy was who "fixed" my screen apparently did so in a way that involved spilling something on my phone, over torquing a screw, breaking a bracket, and the entire thing looks sketch.

All while charging over $100. I can see why he insisted on having an otterbox on the phone now, he fucked up and was worried the one screw pin wouldn't hold the screen on. Motherfucking asshole.

That moment when you block fb and reddit on pc to boost productivity but devRant screws you over.

Right to repair by Corsair
My mouse has double click glitch...
To disassemble the mouse, first skates need to be peeled off and destroyed in order to get to mounting screws...
I was unable to find those skates online, so I reached directly the Corsair to check if they sold them. Of course they don't sell them...
Next I tried to find professional shop. I found one willing to replace switch for 50$ while brand new mouse costs 60$.
FUCK YOU CORSAIR

I took apart 2014 Mac Mini today. I don't wanna ever do that again. It was horrible experience.

Also fuck Torx TR6 screws.

RONALD REAGAN VIRUS: Saves your data, but forgets where it's stored.

MIKE TYSON VIRUS: Quits after two bytes.

OPRAH WINFREY VIRUS: Your 300 MB hard drive suddenly shrinks to 100 MB, then slowly expands to 200 MB.

TITANIC VIRUS: Your whole computer goes down.

DISNEY VIRUS: Everything in your computer goes Goofy.

PROZAC VIRUS: Screws up your RAM but your processor doesn't care.

ARNOLD SCHWARZENEGGER VIRUS: Terminates some files, leaves, but will be back.

Pissed off:
Trying to write a date function that converts an Int (seconds) to days hours/minutes/seconds.
Get stuck when I build the output-string because I need to mix string and Int. I am used to C# and PHP, C++ just screws it up for me.

Our Joomla-based site just got a redesign. The developer who did it did something wrong. Articles no longer are attached to their parent categories and are now all referenced at the root level in URLs.

I pulled up the 404 log and now see that some website or bot or whatever is hitting up each category for each article, which screws with our SEO 404 report in Google Search Console.

Which means I have to find a way to programmatically redirect every article within every category "up" a level to the root where each article is now found.

And I have no way of knowing which article belongs to which category anymore. Even if I did, a test shows that articles attached to categories still want to come up at the root level, not in their categories.

Joomla is G.A.R.B.A.G.E.

A little example of how recriutment in IT works.

Mechanic gets a live mechanic skill test to get a job, as he really wants this job because of lack of money he asks recriuter couple of questions.
Mechanic: do I need to bring my own tools ?
HR: no everything will be provided in place
Mechanic: what would I do during this test ?
HR: everything will be explained just before the test I’m not an engineer so engineer will explain everything to you

The test day, mechainc goes to the test place and the recriuter says:
Recruiter: Your first task is really simple, please tighten those screws, you have 10 minutes
Mechanic: But I don't see the screw driver

Recriuter: I can't say to you how to do it, you figure something out
Mechanic somehow manages to tighten those screws using his belt

Recriuter: Ok so now tell me what force is needed to unscrew them and tell me if you did good if I’d say you need to tighten 1 million screws
Mechanic: I just want to do my job

Recruiter: Hey we are looking for people with broad experience for this position, of course you wont be asked to do that task but we want to know if you’re capable to do the job if we ask you.
Mechanic: answers the question that he will use tools and what devices he will use to measure the force

Recriuter: Can you write this as a mathematical equation ?
Mechanic: don’t know that
Recruiter: Well we can’t hire you we are looking for someone with more knowledge about the topic

Mechanic: But you keep asking me about the fucking screws
Recruiter: Watch your mouth sir because for me you are junior mechanics, you don’t know how to use proper tools and you barely manage to do the first task in time I would use: started elaborating about tools to tighten many screws at a time in a distributed fashion

Mechanic: but to run those tools I would need more than 10 minutes and besides that those are not here
Recruiter: yes they are, we open those doors to get them before our work you suppose to know that and we use those all the time, it was in job description, besides that it is recommended by company xyz to keep those tools behind blue doors, there is nothing here besides blue doors and room with tools and you didn’t know what blue doors are for, you need to learn the basics first

Mechanic resigns. 90% luck 10% skill
Every fucking time.

People at work found out Teams in a nightmare and really screws with your normal email address processing. They also found out it isn't free with the shit tier of Office (or wherever it is bundled). So for everyone but sales there is no Teams. Whew... However, for the tech dudes: electrical and software we made a custom Discord server. Of course my avatar is "trolling DiCaprio".

Some technical and some not work stuff has gone on with this server. Kind of gives the tech people a place to talk and joke.

devdude: Apologies that I saw this (some question I had) too late to prevent you from walking upstairs.
me: oh, the exercise trauma!
devdude: it's 2024 and we still have to walk up and down stairs
me: I was expecting flying chairs like on Wall-E
devdude: Me too! that's why I put on this much weight so I can be prepared for when the chair finally is here.
me: That is the exact opposite of helping this tech along.

Another thing I noticed about my work place. The BMI of employees seems to increase the closer to a break room you get. The company is fond of bringing donuts periodically. Coincidence I am sure. The problem is I am right next to the break room... Yes, my BMI went up a bit when I moved to my new desk. Before I was much further away. Now I am on a low carb diet. I am going to break the stats damn it!

When a framework is updated, and it screws up the entire project!

Looking at you, Laravel.

How do you define a seniority in a corporate is beyond me.
This guy is supposed to be Tier3, literally "advanced technical support". Taking care of network boxes, which are more or less linux servers. The most knowledgable person on the topic, when Tier1 screws something and it's not BAU/Tier2 can't fix it.
In the past hour he:
- attempted to 'cd' to a file and wondered why he got an error
- has no idea how to spell 'md5sum'
- syntax for 'cp' command had to be spelled out to him letter by letter
- has only vague idea how SSH key setup works (can do it only if sombody prepares him the commands)
- was confused how to 'grep' a string from a logfile

This is not something new and fancy he had no time to learn yet. These things are the same past 20-30 years. I used to feel sorry for US guys getting fired due to their work being outsourced to us but that is no longer the case. Our average IT college drop-out could handle maintenance better than some of these people.

TL:DR Company partner screws up and doesnt do job. I start new company and now able to make ends meet.

My friend and me started this company together. Our roles were defined. I would manage the development of stuff and he would manage getting the clients. I did my job. About a year into the company. He goes ahead and partners in another company. Normally I wouldnt bother, but this is when he stops getting clients for us. Our business drops 50% in the second year. He doesn't work but expects to be paid the same salary as me. I'm doing all the work for the clients while he wastes his time with the other company. He manages to make money doing stuff and buys a BMW, while I'm struggling to make rent.
Finally in Dec last year, I plan to start my own company. And i suddenly have lots of work which pays decently well. I'm looking to hire and am not as stressed with work any more.
Moral of the story: if you must partner, make sure your partner is fully invented in growing your company.

Roof is leaking... Due to rainy stormy weather here, I have now 3 buckets in my flat for catching the water.

Next thing that broke was the faucet in the kitchen... Whoever installed the kitchen (inherited from previous tenant) was a fricking fuck nugget. Not only are most important parts like the stove unbalanced (cooking is very fun...) - but most things were wrongly installed.

The rubber band under the faucet was a few mm larger than the faucet itself... Stretched out as someone really tightened the screws... Too tight. Friction tore the rubber band on one side. Note that the faucet is one of the large, pompous ones which weigh a fuckton. So the fucking faucet now - as the rubber band tore - turned into a sprinkler as the faucet moves due to water pressure.

Ok. Faucet out, new faucet in. Shouldn't be that hard.

Wait. Wtf?

Turns out they didn't use a milling head... The hole is a cone, top larger - then getting smaller.

Ok. No problem.

Let's do some drill action.

Uhm. Why is the place to the window wet... Oh. Great. Another leak.

*some mopping action*

Back to the kitchen. Realizing I didn't fully close the valve for water -.

Kitchen cabinet, next mopping action.

Water with saw dust is pretty ugly combination -.-

Aka: My relaxing Saturday became a full blown """Fuck you with an anchor""" day instead. Thanks universe. Love you hon. Please, next time put at least some lube on the anchor, entry is quite painful.

Yesterday a met a self learned dev. He started electronics at 11 years old. He was homeschooled with no obligations at home. So he ended up doing about 10 hours of electronics a day. Until he got bored of it and realized he could integrate his own programes.

So he started coding 10 hours a day. He is really smart. I figured someone like that surely plays video games. So i mentionned path of exile. I love rpgs the new league is starting on friday， im trying to make exiled friends you know...

The guy tellls me he has no clue about the game so i ask him what games he play and thats when i heard: “factorysialimsntnaio” something. I was like “whaaat?”.

Its the type of game where you create your factory. You smelt， combine， make parts like screws and so on and build your factory.

Thats when i realized how some people will always be smarter than me ;)

Me picking a knife: does research about types of steel, what screws hold it together, what metal detectors it can fool
Me picking a crush: THIS ONE IS PRETTY!

Trying to gut a Power Mac G5 is the most frustrating thing I have ever done in my entire life. There are screws so deep and in such small holes that even Ant Man couldn't get in there

I'm in a situation at work where management and even the team I'm on, does not want to create a test suite, because:
1. It takes time to get decent code coverage. Time that could be spend doing new features
2. My team doesn't like to test.

We're now in a situation where we break something every single fucking time we relase and the manager just ignore that it's now a common occurrence. It it literally just a matter of time before the entire fucking backend will shit itself over poorly maintenanced code (who has time to do refactoring anyway) and poorly tested flow.

It annoys me greatly that a developer with many years of experience fails to see and understand that just doing test by hand, screws us over so badly.

As a junior dev, i would like to know, how are your team dealing with testing?
Because we're clearly not...

JS/NODE/MOCHA I HATE U....

SPENT ALL MORNING REVERTING AND DEBUGGING A BRANCH BC SOME UNIT TESTS FAILED.

THE CAUSE WAS NOT IN THE FAILED CASE THO.... IT WAS BECAUSE SOME OTHER JS FILE WAS NAMED *Test.js

ITS NOT A PROBLEM IN A LIVE SERVER BUT IT SCREWS UP THE SERVER WHEN ITS RUN IN MOCHA FOR ITS UNIT TESTING...

I am sure this guy screws everybody up in viva or in interviews.

I mean, if you don't see the f'ing "evidencie" whether this app is "usefull" or not, why would you try the app in the first place.
Also if the app did not work for you, why won't you post the actual issue.

Any suggestions on what should I reply?

BREAKING NEWS

the new hp stream has accessible screws

under those dumb rubber bands

can't upgrade the ram though

RIP my soul

rant(){
So, yesterday I was explaining one of our sales guys why I wouldn't be able to finish a task for his client, since I had passed the last days recovering from a major db breakdown, and had plenty of work on wait before I could get to what he asked.
The prick goes and tells my PM he's about to loose the business because of me, and screws all my timetable for the week...
What should I do to make sure he never messes with devs anymore?
}

THANK YOU DEVRANTS for supporting comment modifying!!

My crappy Samsung Galaxy routinely screws up words and punctuation, and I don't always remember to read it before sending. You've helped me seem articulate and non-idiotic.

It got so hot in the house today my grandmother's ceiling fan melted inside. It gets up to 350°F when it's spinning now and fucking SCREAMS.

Here are the charred-ass screws we pulled out.

When you go for a demo to your execs and your low-resolution projector screws up each and every part of your website. #screwed

How many Windows users does it take to change a light bulb? - 100. one screws and 99 clicks the error messages away

I fucking hate that DLP printers are so damn hard to get right. Spent 5h levelling the bed. Stupid shit aligning itself differently depending on how tight you make the screws!

When VGA cable screws don't have a screwdriver slot in them!

grrrr

last week my laptop died out of nowhere. it stopped recognizing the one drive in it. I lost a bunch of files, code. evidently ssds fail out of nowhere unlike hdds which slow down and error all the time before ultimate failure

my warranty for this 4k$ laptop expires in 12 months and this was month 13. nice. I don't like warranties anyway, and the site said they would replace things with "comparable hardware, sometimes refurbished" wtf no thanks

so I found some guides of people upgrading the drive in this laptop. seemed easy enough, unlike older laptops from back when I was in school where you had to take out 12 things first to get to anything
unfortunately I needed a specific screwdriver. I walked several miles to the nearby hardware store thinking they would have said screwdriver. the old guy in the basement said there was a kit where it started from t4 (I needed t5), but he had just sold out his last one. I checked their online store with a friend for a while on my way back home and we kept finding torx screws but the wrong sizes. fuck.
he said screwdrivers this small are only used for electronics, asked if there's any other hardware stores and there aren't near me
however it occurred to me this strip mall has a lot of suspicious computer stores on it. so I walked back up the street looking for one.
found one with a suspicious poster, saying it was an internet cafe but the last point on their poster said they do repairs. walked in. nobody is in there, suspiciously 2 desks with old computers all empty, then you go forward in this dark cave, with plastic wrapped implements on the walls, you finally find a glass shield and behind it was a meek Asian man that took me a moment to notice
I asked him if he had t5
he handed me a plastic baggy full of tiny screwdrivers, for me to take one
I asked if they're t5
the shape looked right, but I can't tell the size
I took one out and tried to find size marking, but nothing
he didn't seem to know what I was asking when I asked about its size
he said if it's wrong I can come back and trade what I took for another. lol
I asked him if I can buy it, since that wasn't evident to me due to how sus this random bag of screws is being thwarted on me lmao
he said 5$ cash
I gave him a fiver
this sus shop literally avoiding taxes lmao

walked back home, ate food cuz starving, tried the screw and FUCK, it's too big. put laptop in a bag and hauled ass fast, checked on maps the store I got this from closes in a few minutes so I really wanted to make it there because what if the receptionist changes and they don't know I took this screw. I got no receipt

got there right before closing, put my laptop down, said it was too big. he used a few screws until he found one that fit, said I could try it and I did (so scam aware!). bingo bango. now I got a screwdriver that fits the laptop.

walked home, sat down and took apart the laptop. been a few years since I did so. the hardware inside looks entirely unrecognizable to me. started cycling through YouTube videos of laptops of the same name as mine, but their insides don't look like mine. is this ram? is this the NVMe? what the fuck is anything?
finally found a video guide where the guy was quite informative. not the same laptop but he's informative enough I figure it out. ram and drives are so different and weird now. took parts out, put them back in, rebuilt laptop, tried to boot, same problem. jiggling parts like this works with desktops often, guess not with a failed NVMe

so I'm screwed. get on Newegg and bought a new NVMe. should arrive in 3 days via Purolator

yesterday was day 3. it was at a sort facility near me, then out on delivery, but nobody ever came. then it went back to sorting. now it's out on delivery again. I'm sitting here thinking that's a little weird, wasn't Purolator the delivery company that had me go 2 hours outside of town to pick up a 15lb desktop case once?

... and then I looked up Reddit comments... then reviews on the purolator facility it's at... I am screwed. last time iirc they were out for delivery for 3 days, never tried delivery, then on the last day at the end of day they stated they attempted delivery but no go. that was bullshit. then it ended up at that facility. which takes 2 hours to fucking reach.
the reviews are so bad... the facility has 1.2 star reviews with thousands of them. they won't leave even a stub, then seem to not know where your package is at the facility, or they deny you have the right to pick it up despite ample IDs, or someone ELSE picks it up and it's not there. they also ship your package back after 5 days, so if they don't leave a note and you miss it tough luck...

fucking hell
also rumours that they just hire "contractors" in normal cars to drop off packages? wat? lol
AND EVERY REVIEW HAS A BOT COMMENT. THEIR SUPPORT IS JUST A CHATBOT

I thought this was just a small hiccup
I think I might not have a drive for weeks now
fucking hell
now I'm sitting on my porch

Is anyone here up for a long convoluted explanation of how exactly I predicted the last major btc peak/trough within just a couple hundred dollars?

There's actually a pretty precise reason it did what it did. Basically when china started tightening the screws, userbase fell along with price.
And when the price of an asset falls *with* userbase or ownership numbers, there is a delay in reevaluation, and therefore "current" market value doesn't accurately reflect true value.

I can show the math but again its convoluted. Has to do with userbase versus market cap.

Not a financial advisor fyi and I could be wrong.

Anyone else have a problem with they MacBook Pro's internal connector to they keyboard and mouse becoming disconnected?

I've got it fixed at the Apple store once and now it's happened again! I'm so tired of having to mush the cable in through the chassis 😥

This is interesting from a troubleshooting point of view. I have a decent laptop I use to play Fallout 4. It was running just fine until recently. The game will spike GPU activity and crash. I found if I reduced settings and lower resolution it happens less often.

I kept searching and finally found someone saying it could be GPU thermal compound has worn out. So I looked how to change that on a laptop. The video I found it looked fairly easy.

I get into my laptop and I find all the screws for the heatsink/head pipe assembly. However there is a ton of thermal tape used everywhere holding it all down. I think if I am not careful I will break the heat sink. I did pull on the main part and it just didn't want to give.

Feeling a bit defeated as I put everything back together. I had gotten some decent thermal compound for this. So I fire up the game and it runs fine at the low settings. Then I raise all the settings to max with max resolution. This was crashing the game the last few days. It just runs and runs fine on those settings. GPU temps look normal (they did before, but I wanted to see). So, all I can think the act of lifting the heat sink a small amount may have reseated the thermal compound a bit. I am still going to price out a professional doing this, but I can play on max settings again. Maybe messing with screws on GPU and slightly moving the heat sink actually did something.

This confirms to me that something needs done about the thermal compound. The company I bought the laptop from offered custom thermal compound at time of purchase. So I am thinking they can do this for me. It will be cheaper to pay a couple hundred bucks to have a pro do this rather than pay $1800 for a new computer. This is only 2 1/2 years old. It has been a top performer up til now.

If you run into occasional graphics driver crashes and you use Firefox on Windows & Radeon Graphics, then you might want to disable hardware acceleration setting in Firefox. It reduced the frequency of crashes for me

Seems like Firefox screws up Radeon OpenGL driver somehow 🤔💭🦊

It is prone to crashing when I have a 3D game open and Firefox with hw.acc=enabled open at the same time

Asking for a friend. Anyone here know how to get code syntax highlighting in Photoshop?

Screenshot and removing the background doesn’t help. It screws up the font of the code.

🙏🏻

I needed to install an extra Ethernet card on my machine at work. The process of getting it from the IT department was fairly easy, but the damn things didn't have the small screws you need, in order for the card to not hang on the PCI-E port...

Turns out finding that kind of screws is way more annoying than the card itself. :/ I don't get why they were not included, if they are essential for the operation of the card...

In a normal application with front and back separated, how do you guarantee consistency between models? Do people normally do PRs to change them on both sides and hope none screws up or is there a better way?

Some time ago I was looking into generating stuff from the OpenAPI spec. Is this a good idea? Also, can graphql help with this? I'm soooo confused by this, it's like a problem I never managed to solve in my head...

!dev

Fuck, I hate moving. All the tearing down and subsequent assembly takes sooo bloody long. And you have to be extra careful not to destroy all your (no so) cheap IKEA furniture when taking off the screws and nails. ~Lê stupid me didn't think he'd have to disassemble this stuff, so I actually used nails. D'oh. So now I have some splintered wood. Congrats, you cockwomble. Good luck repairing that.
I'll use screws (torx head, of course) when reassembling though, not making the same mistake again.

Oh, and then there's all the dust and cobwebs and fucking spiders living under the furniture, because I can't tilt my wardrobe to vacuum underneath it. Just. Fucking. Lovely.

On the upside, I get to do an early spring cleaning on all my accumulated trash. New apartment is gonna be so clean and minimal, you'd mistake it for a monastic meditation room. With a pair of monitors and my beautiful desktop to the side. Meditation is lovely, but I also pray to the silicon and transistor gods. Need mah tech shrine.

When your php-code and the taxonomy of your site is perfect, but a plugin screws the breadcrumbs totally :(

So, I just attempted to use KDE's partitionmanager application on Gentoo... just noticed that every time I run it, it screws up the formatting in /etc/fstab.

That's a deal-breaker! Back to gparted...

To the slackers on this team - fuck you all.

I know you don’t work during the day. I’m either getting another job or moving into management, and god help you if either happens. Your current manager has been watching you like a hawk, but he’s scared of attrition. But if his manager pushes him on it he’ll PIP you all. He hates you too.

If I get a new job - our manager’s manager will know, our manager will get pressure to PIP you, and you’ll endure months of hell while every stakeholder with deadlines realizes they can tighten the screws on you and if you don’t respond well you’ll be seen as even bigger fuckups.

If I move into management - PIPs incoming. You’ve made my life hell. But I’m going to make sure you’re stuck in this hell with me for as long as possible. That transfer you wanted? Fuck no, you will maintain this legacy system under increasingly unreasonable deadlines until you quit. Should’ve done your work back when there was still time. And until you quit, it will be torture. I plan on asking for constant status updates that are sure to break your flow. And when you quit - better leave us off those references.

Fuck you. The rest of the team is working overtime because of your shitty personality. I know you like this job - get ready to lose it and watch everyone who’s been chomping at the bit to make your life miserable take swings at you.

I hate these strange tool less pin/clip things when installing a HDD. What was wrong with screws?

I know the video editing software LightWorks has its aficionados. I can see how it's powerful. I've been using it since at least version 12. But my gosh how it screws people over. In the latest version, when you import files into a project and then want to delete _just the reference_ to the files in the project, LightWorks says "Nope, imma delete the FILE, too!" So you can never just start over with an import. When you import a bunch of still photos in one shot, no matter how many, it imports them all as an unwatchably fast 1 second video sequence instead of as an individual file. Like...what? And they've dumbed down the interface so much that there's no toolbar. You have to right-click poke at everything to try to find where stuff is. And right clicking is NON-EXISTENT on a Mac. I had to use a pen tablet to achieve it. I'm too cheap to buy Adobe Premiere for the few times I have to edit video in a year, so I guess it's just ShotCut on Windows for the rest of my life.

I understand that climate change is a thing and all but it still screws with me every time it rains in Cape Town this time of year